How to get prompt on exit re: emptying deleted items, in Outlook 2016?
Prior to my recent upgrade to Office 2016, using Outlook 2013, I could delete Outlook items all day and have them stay in the Deleted Items folder -- being ASKED, when I exited the program, if I now wanted to DELETE them "permanently." (We're on Office365.)
Now that I'm on Outlook 2016, I cannot find how to enable that warning/prompt. It looks like they either get deleted when I exit (Empty Deleted Items on exit option), or never.
How can I be prompted on exit, in Outlook 2016?
Em
Reply:
That setting is under Outlook Options > Advanced > Other, Prompt for confirmation before permanently deleting items.
-Peter
------------------------------------
flat file assembler issue after migration
hi All
we are migrating Biztalk 2009 to 2013 R2. Everything has worked properly except pipeline with flat file assembler. Haven't made any change to schema or pipeline we just migrated and after migration we are getting different result in 2009 and 2013. not sure what is wrong i tried removing flat file assembler and reinserted to pipeline and deployed the application but still same result.
here is result from2009
1PEOPLECLICK 2016021802303100000000000005 FG
21297255 EXXONMOBIL CHEMICAL BTEC
3100000899957W3A0395201508230800 0800 0800 0540 0800 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 20150817201508182015081920150820201508212015082220150823000000000000000000000000000000000000000000000000000000000000000000000000000000000000 201508250000 YShona Saunders 0000000000 H
21297254 EXXONMOBIL BTCP CDMS GEMS
310000099765875A7167201508230810 0790 0840 0840 0720 0000 0000 0000 0000 0000 0000 0100 0000 0000 0000 0000 0000 0000 0000 0000 0000 20150817201508182015081920150820201508212015082220150823000000000000000000000000000000000000000000000000000000000000000000000000000000000000 201508250000 YJaquelyn Gonzalez 0000000000 H
and here is result from 2013
1PEOPLECLICK
2016022510530500000000000004
FG
21297254 EXXONMOBIL BTCP CDMS GEMS
310000092935875A7116201508230640 0850 0820 0850 0840 0000 0000 0000 0000 0000 0000 0010 0000 0000 0000 0000 0000 0000 0000 0000 0000 20150817201508182015081920150820201508212015082220150823000000000000000000000000000000000000000000000000000000000000000000000000000000000000 201508250000 YDebra AGarza 0000000000 H
310000099765875A7167201508230810 0790 0840 0840 0720 0000 0000 0000 0000 0000 0000 0100 0000 0000 0000 0000 0000 0000 0000 0000 0000 20150817201508182015081920150820201508212015082220150823000000000000000000000000000000000000000000000000000000000000000000000000000000000000 201508250000 YJaquelyn Gonzalez 0000000000 H
in 2013 it is adding extra line.
Regards, Amit More
Reply:
------------------------------------
Reply:
Regards, Amit More
------------------------------------
Reply:
------------------------------------
Reply:
Thanks,
If my reply is helpful please mark as Answer or vote as Helpful.
My blog | Twitter | LinkedIn
This post is my own opinion and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs.
------------------------------------
Reply:
Dear all ,
i am facing exactly the same issue can you please reply with resolution in my code i dont have xlst . Please suggest .
Regards,
Navin
Navin Jaiswal
------------------------------------
Reply:
------------------------------------
Set the default location in Windows 10's Weather App for all users
I want to set the default location for all users in the Weather App on Windows 10 Ent v1607.
Here what I've done:
Using Procmon, I discovered the settings are stored in an App Hive. Searching for RegLoadAppKey, I discovered the hive is saved here:
- C:\Users\<username>\AppData\Local\Packages\Microsoft.BingWeather_8wekyb3d8bbwe\Settings\Setting.dat
To configure the default location for all new accounts:
- Logon to a new profile, then log off
- Copy folder tree from: C:\Users\<username>\AppData\Local\Packages\Microsoft.BingWeather_8wekyb3d8bbwe to a temporary folder (it will be a collection of mostly empty folders with a couple files)
- Logon, run Weather app, configure settings, close app, and log off
- Copy the contents of the Settings folder to the Settings temporary folder from step 2, overwriting the two files already there.
- Copy the temporary folder to: C:\Users\Default\AppData\Local\Packages\Microsoft.BingWeather_8wekyb3d8bbwe
If the entire tree is not copied, Windows will provision the app with the defaults.
When a new user logs on and runs the app, they are not prompted for a default location and it displays the weather for the configured location. Good!
Problem:
The live tile will not use the configured location until the app is run once. So, "Washington DC" is displayed until the user clicks the tile. The user can immediately close the Weather App, and the tile will display the correct location. Weird.
I want the live tile to use a specified location before the user runs the app. Any ideas?
Reply:
Dear Tony,
The method you have done is correct, by the way, we can configure location for all users, that's good.
But, one thing we should know, Weather app belongs to Store app, which is based on user account, only when we click it, it means that we register this app by current account, if we have not start it, it just stays in the original state.
As you see, until we open it once then this app will be activated and show the configured weather information, it's a normal phenomenon, we can't change this point.
Thanks for your discovery and sharing, I really appreciate.
Best regards
Please remember to mark the replies as answers if they help.
If you have feedback for TechNet Subscriber Support, contact tnmff@microsoft.com.
------------------------------------
Reply:
Thank you for the verification. I'll just have to live with it. Hopefully this thread will be of use to others.The method you have done is correct, by the way, we can configure location for all users, that's good.
...
As you see, until we open it once then this app will be activated and show the configured weather information, it's a normal phenomenon, we can't change this point.
...
-Tony
------------------------------------
Reply:
Please remember to mark the replies as answers if they help.
If you have feedback for TechNet Subscriber Support, contact tnmff@microsoft.com.
------------------------------------
Reply:
------------------------------------
SUPPORT-TIP: Custom Action DetectServiceAccount causes upgrade installation to fail:
New blog posting to the FIM/MIM Support Team Blog.
This pertains to installation issues concerning the Synchronization Service Engine where the DetectServiceAccount fails.
SUPPORT-TIP: Custom Action DetectServiceAccount causes upgrade installation to fail: http://blogs.technet.microsoft.com/iamsupport/2017/05/31/support-tip-install-custom-action-detectserviceaccount-causes-install-to-fail/
FIM-MIM Identity and Access Management Support Team Blog: http://blogs.technet.microsoft.com/iamsupport
Tim Macaulay Security Identity Support Team Support Escalation Engineer
Adding network printers
I am stumped here. I have a .bat file that I run in my company that helps some of our employees add network printers. I am continuing to get the error code 87 each time I run it. Thus, it is not working. I am running this ona windows 10 machine. However, if I run this on a windows 7 machine it runs just fine. Can someone help me figure this one out?
CLS
@ECHO off
:StoreNo
cls
echo.
echo Enter Store Number
set /p store= :
set oct3=notSet
If /I "%store%"=="130" set oct3=144
If /I "%store%"=="206" set oct3=150
If /I "%store%"=="215" set oct3=145
If /I "%store%"=="217" set oct3=151
If /I "%store%"=="230" set oct3=146
If /I "%store%"=="233" set oct3=152
If /I "%store%"=="239" set oct3=147
If /I "%store%"=="249" set oct3=148
If /I "%store%"=="252" set oct3=149
If /I "%store%"=="424" set oct3=1
If /I "%store%"=="425" set oct3=2
If /I "%store%"=="428" set oct3=65
If /I "%store%"=="433" set oct3=93
If /I "%store%"=="436" set oct3=67
If /I "%store%"=="437" set oct3=68
If /I "%store%"=="438" set oct3=19
If /I "%store%"=="458" set oct3=108
If /I "%store%"=="468" set oct3=72
If /I "%store%"=="471" set oct3=107
If /I "%store%"=="475" set oct3=110
If /I "%store%"=="601" set oct3=98
If /I "%store%"=="602" set oct3=135
If /I "%store%"=="603" set oct3=52
If /I "%store%"=="604" set oct3=9
If /I "%store%"=="605" set oct3=10
If /I "%store%"=="606" set oct3=11
If /I "%store%"=="607" set oct3=133
If /I "%store%"=="608" set oct3=8
If /I "%store%"=="609" set oct3=14
If /I "%store%"=="610" set oct3=15
If /I "%store%"=="611" set oct3=95
If /I "%store%"=="612" set oct3=16
If /I "%store%"=="614" set oct3=99
If /I "%store%"=="615" set oct3=18
If /I "%store%"=="616" set oct3=129
If /I "%store%"=="617" set oct3=114
If /I "%store%"=="618" set oct3=21
If /I "%store%"=="619" set oct3=140
If /I "%store%"=="620" set oct3=41
If /I "%store%"=="622" set oct3=23
If /I "%store%"=="626" set oct3=24
If /I "%store%"=="629" set oct3=141
If /I "%store%"=="630" set oct3=97
If /I "%store%"=="631" set oct3=62
If /I "%store%"=="632" set oct3=20
If /I "%store%"=="634" set oct3=27
If /I "%store%"=="640" set oct3=103
If /I "%store%"=="641" set oct3=66
If /I "%store%"=="642" set oct3=28
If /I "%store%"=="644" set oct3=105
If /I "%store%"=="645" set oct3=13
If /I "%store%"=="646" set oct3=6
If /I "%store%"=="647" set oct3=115
If /I "%store%"=="650" set oct3=128
If /I "%store%"=="651" set oct3=102
If /I "%store%"=="653" set oct3=96
If /I "%store%"=="654" set oct3=127
If /I "%store%"=="655" set oct3=92
If /I "%store%"=="656" set oct3=36
If /I "%store%"=="657" set oct3=17
If /I "%store%"=="661" set oct3=5
If /I "%store%"=="662" set oct3=39
If /I "%store%"=="663" set oct3=40
If /I "%store%"=="664" set oct3=80
If /I "%store%"=="667" set oct3=101
If /I "%store%"=="669" set oct3=33
If /I "%store%"=="670" set oct3=106
If /I "%store%"=="672" set oct3=111
If /I "%store%"=="673" set oct3=119
If /I "%store%"=="674" set oct3=42
If /I "%store%"=="676" set oct3=124
If /I "%store%"=="677" set oct3=89
If /I "%store%"=="678" set oct3=44
If /I "%store%"=="679" set oct3=43
If /I "%store%"=="680" set oct3=46
If /I "%store%"=="681" set oct3=122
If /I "%store%"=="682" set oct3=125
If /I "%store%"=="685" set oct3=109
If /I "%store%"=="687" set oct3=120
If /I "%store%"=="688" set oct3=88
If /I "%store%"=="694" set oct3=117
If /I "%store%"=="699" set oct3=126
If /I "%store%"=="701" set oct3=153
If /I "%store%"=="703" set oct3=169
If /I "%store%"=="705" set oct3=154
If /I "%store%"=="706" set oct3=159
If /I "%store%"=="710" set oct3=165
If /I "%store%"=="712" set oct3=163
If /I "%store%"=="713" set oct3=170
If /I "%store%"=="714" set oct3=166
If /I "%store%"=="715" set oct3=155
If /I "%store%"=="716" set oct3=161
If /I "%store%"=="717" set oct3=168
If /I "%store%"=="724" set oct3=164
If /I "%store%"=="726" set oct3=156
If /I "%store%"=="727" set oct3=172
If /I "%store%"=="735" set oct3=157
If /I "%store%"=="738" set oct3=173
If /I "%store%"=="743" set oct3=162
If /I "%store%"=="747" set oct3=167
If /I "%store%"=="759" set oct3=158
If /I "%store%"=="773" set oct3=160
If /I "%store%"=="774" set oct3=171
If /I "%store%"=="800" set oct3=31
If /I "%store%"=="816" set oct3=94
If /I "%store%"=="820" set oct3=12
If /I "%store%"=="821" set oct3=25
If /I "%store%"=="823" set oct3=54
If /I "%store%"=="827" set oct3=61
If /I "%store%"=="839" set oct3=112
If /I "%store%"=="840" set oct3=55
If /I "%store%"=="848" set oct3=57
If /I "%store%"=="849" set oct3=58
If /I "%store%"=="852" set oct3=82
If /I "%store%"=="859" set oct3=81
If /I "%store%"=="860" set oct3=100
If /I "%store%"=="865" set oct3=84
If /I "%store%"=="866" set oct3=59
If /I "%store%"=="890" set oct3=60
If /I "%store%"=="891" set oct3=104
If /I "%store%"=="892" set oct3=70
If /I "%store%"=="893" set oct3=71
If /I "%store%"=="895" set oct3=75
If /I "%store%"=="896" set oct3=76
If /I "%store%"=="897" set oct3=83
If /I "%store%"=="898" set oct3=121
If /I "%store%"=="2407" set oct3=207
If /I "%store%"=="2446" set oct3=3
If /I "%store%"=="2457" set oct3=4
If /I "%store%"=="2619" set oct3=22
If /I "%store%"=="2801" set oct3=201
If /I "%store%"=="2802" set oct3=202
If /I "%store%"=="2803" set oct3=203
If /I "%store%"=="2805" set oct3=205
If /I "%store%"=="2806" set oct3=206
If /I "%store%"=="2843" set oct3=204
If /I "%store%"=="3607" set oct3=139
If /I "%store%"=="3622" set oct3=137
If /I "%store%"=="3642" set oct3=32
If /I "%store%"=="3893" set oct3=69
If /I "%store%"=="3631" set oct3=131
If /I "%store%"=="4433" set oct3=143
If /I "%store%"=="4458" set oct3=29
If /I "%store%"=="WHSE" set oct3=30
If /I "%store%"=="140" set oct3=142
If /I "%store%"=="5468" set oct3=7
If /I "%store%"=="5727" set oct3=26
If /I "%store%"=="5895" set oct3=138
If "%oct3%"=="notSet" goto StoreNo
:location
cls
echo.
echo Enter Store or Rx
set /p Loc= :
echo.
set oct2=notSet
If /I "%Loc%"=="store" set oct2=16
If /I "%Loc%"=="rx" set oct2=17
If /I "%oct2%"=="notset" goto Location
cls
:2IP
If /I "%oct2%"=="16" goto StorePrinter
If /I "%oct2%"=="17" goto RXPrinter
:StorePrinter
cls
echo.
echo Enter SIGN, MFP, or DSD
set /p Prtr= :
echo.
set oct4=notSet
If /I "%Prtr%"=="sign" set oct4=21
If /I "%Prtr%"=="mfp" set oct4=22
If /I "%Prtr%"=="dsd" set oct4=23
If /I "%Prtr%"=="sign" set Prtr=SIGN21
If /I "%Prtr%"=="mfp" set Prtr=MFP22
If /I "%Prtr%"=="dsd" set Prtr=DSD23
If "%oct4%"=="notSet" goto StorePrinter
Goto SetVars
:RXPrinter
cls
echo.
echo Enter FAX, MAIN, or MAIN2
set /p Prtr= :
echo.
set oct4=notSet
If /I "%Prtr%"=="fax" set oct4=20
If /I "%Prtr%"=="main" set oct4=21
If /I "%Prtr%"=="main2" set oct4=22
If /I "%Prtr%"=="fax" set Prtr=FAX20
If /I "%Prtr%"=="main" set Prtr=MAIN21
If /I "%Prtr%"=="main2" set Prtr=MAIN22
If "%oct4%"=="notSet" goto RXPrinter
goto SetVars
:SetVars
cls
SET varIP=172.%oct2%.%oct3%.%oct4%
SET varDriver=Lexmark Universal
SET varName=%store%-%Prtr%
SET varLocation=172.%oct2%.%oct3%.%oct4%
REM Check 32 or 64 bit
if exist "c:\Program Files (x86)\" goto x64
:x86
SET varDriverFolder=\\fc1\\groups\\Lexmark Universal Driver 32-bit\\Print\\GDI
SET varDriverFile=\\fc1\\groups\\Lexmark Universal Driver 32-bit\\Print\\GDI\\LMUD1O40.inf
goto AddPrinter
:x64
SET varDriverFolder=\\fc1\\groups\\Lexmark Universal Driver 64-bit\\print\\win_2kxp\\
SET varDriverFile=\\fc1\\groups\\Lexmark Universal Driver 64-bit\\print\\win_2kxp\\LMUD0640.inf
:AddPrinter
cls
echo.
REM "Deleting TCP/IP port"
Echo Removing Port
REM CSCRIPT /nologo %windir%\system32\Printing_Admin_Scripts\en-US\prnport.vbs -d -r IP_%varIP%
cls
REM "Creating TCP/IP port"
ECHO Creating Port
CSCRIPT /nologo %windir%\system32\Printing_Admin_Scripts\en-US\prnport.vbs -a -r IP_%varIP% -o raw -n 9100 -h %varIP%
CLS
REM "Installation message"
@ECHO.
@ECHO The %varLocation% printer is currently being installed.
@ECHO.
@ECHO Please do not close this window.
@ECHO.
@ECHO Once the installation is complete this Setup window will exit.
@ECHO.
REM "Driver installation"
Echo Installing Driver
CSCRIPT /nologo %windir%\system32\Printing_Admin_Scripts\en-US\prndrvr.vbs -a -m "%varDriver%" -h "%varDriverFolder%" -i "%varDriverFile%"
echo.
REM "Printer deletion"
echo Removing Possible Duplicate Printer
CSCRIPT /nologo %windir%\system32\Printing_Admin_Scripts\en-US\prnmngr.vbs -d -p "%varName%"
echo.
REM "Printer installation"
echo Adding Printer
CSCRIPT /nologo %windir%\system32\Printing_Admin_Scripts\en-US\prnmngr.vbs -a -p "%varName%" -m "%varDriver%" -r "IP_%varIP%"
echo.
REM "Location configuration"
echo Configuring Printer
CSCRIPT /nologo %windir%\system32\Printing_Admin_Scripts\en-US\prncnfg.vbs -t -p "%varName%" -l "%varLocation%"
echo.
REM "Making it Default printer"
REM CSCRIPT %windir%\system32\Printing_Admin_Scripts\en-US\prnmngr.vbs -p "%varName%" -t
- Changed type Bill_Stewart Friday, July 7, 2017 6:59 PM
- Moved by Bill_Stewart Friday, July 7, 2017 6:59 PM This is not "research solution for me" forum
Reply:
Please do not close this window.
Once the installation is complete this Setup window will exit.
Installing Driver
Unable to add printer driver Lexmark Universal Win32 error code 87
Removing Possible Duplicate Printer
Unable to delete printer 821-MFP22 Error 0x80041002 Not found
Operation GetObject
Provider CIMWin32
Description
Win32 error code
Adding Printer
Unable to add printer 821-MFP22 Error 0x80041001 Generic failure
Operation PutInstance
Provider Win32 Provider
Description The printer driver is unknown.
Win32 error code 1797
Configuring Printer
Unable to get configuration for printer 821-MFP22 Error 0x80041002 Not found
Operation GetObject
Provider CIMWin32
Description
Win32 error code
------------------------------------
Reply:
-- Bill Stewart [Bill_Stewart]
------------------------------------
Network Drive mapping script
Basically I am trying to disconnect shares from old DC1 server and map shares on a new DC2 server (having the same permissions and same share names)
BAT script runs a PS script (to disconnect drives) and then executes map commands.
BAT script
@echo off
#runs a PS script
PowerShell.exe -ExecutionPolicy Bypass -Command "& '%~dpn0.ps1'"
#maps drives
net use * \\dc2\production /P:Yes
net use * \\dc2\finance /P:Yes
PS script
#Delete drives
Import-Module activedirectory
$mapped = Get-WmiObject Win32_MappedLogicalDisk | Select DeviceId, ProviderName
foreach ($item in $mapped) {
if ($item.ProviderName -eq '\\DC1\production') {net use $item.DeviceId /del}
}
$mapped = Get-WmiObject Win32_MappedLogicalDisk | Select DeviceId, ProviderName
foreach ($item in $mapped) {
if ($item.ProviderName -eq '\\DC1\finance') {net use $item.DeviceId /del}
}
Everything works well. But I am facing an issue that all of the shared drives are still mapped on everyone's PC regardless if they have access to the share or not(they remain mapped but you are unable to access the share obviously). So I was wondering is there a way that PS or BAT script could check if the share exists on laptop and if it does it would map a share and if it does not it would just skip mapping that particular share?
MK
- Changed type Bill_Stewart Friday, July 7, 2017 6:58 PM
- Moved by Bill_Stewart Friday, July 7, 2017 6:59 PM This is not "research solution for me" forum
Reply:
-- Bill Stewart [Bill_Stewart]
------------------------------------
GPUPDATE Fails
Dear All,
i am facing issue while running Gpupdate /force in client machine as well as in DC "The processing of Group Policy failed. Windows could not apply the registry-based policy settings for the Group Policy object" also i am trying to create a policy to the specific OU (Which contains computers alone) for refresh policy interval. The error I am receiving is "LDAP://CN=User, cn={6D53A98C-0115-4FF3-8E7F-AA0D65B1391D}, CN=POLICIES, CN=SYSTEM, CN=(MY DOMAIN), DC=NET. Group policy settings will not be resolved until this event is resolved.
Any help is greatly appreciated.
Reply:
------------------------------------
Reply:
You can check the policy with the GUID {6D53A98C-0115-4FF3-8E7F-AA0D65B1391D} by running the powershell command get-gpo -guid 6D53A98C-0115-4FF3-8E7F-AA0D65B1391D
Check what this policy is doing and if there is any reason for which the user will not get this policy
Also run Gpresult /z and check if the policy is getting applied
------------------------------------
Importance of Computer and Technology to your Business
Issue Skype for Business Client Mobile device sign in
Dear Forum user,
I would like to ask about my current issue for Skype for business sign in from Mobile device like IOS, Android,...etc. I have prepare setup and skype for business user can sign in by PC, laptop from Outside organization but not working from Phone. please advise if there is any tool to check connectivity issue on Smart phone. thanks
Sokneang SAM
Reply:
Hi Sokneang,
Have you tested connectivity? Two tools available to you: remote connectivity analyser and connectivity analyser tool
The remote connectivity analyser is an online tool that you run from the Office 365 portal. The connectivity analyser tool is downloaded and run on your infrastructure. The former is a complete analysis of ports that are needed across the whole of Office 365, licenses, credentials and even updates. The latter will allow you to test connectivity to services required for Mobility client to function on mobile devices.
Here's some links that may help:
Microsoft Remote Connectivity Analyser
https://testconnectivity.microsoft.com/
Microsoft Connectivity Analyser Tool
Hi Sokneang,
Have you tested connectivity? Two tools available to you: remote connectivity analyser and connectivity analyser tool
The remote connectivity analyser is an online tool that you run from the Office 365 portal. The connectivity analyser tool is downloaded and run on your infrastructure. The former is a complete analysis of ports that are needed across the whole of Office 365, licenses, credentials and even updates. The latter will allow you to test connectivity to services required for Mobility client to function on mobile devices:
Microsoft Remote Connectivity Analyser (online tests)
Microsoft Connectivity Analyser Tool (downloadable test tool)
Example use of the tool:
Hope this helps,
Damien
------------------------------------
Reply:
Dear Damien,
It is useful tool, i have try the test and it shown result below. i think for lync discover internal is OK we can skip as using from external network. i have found that there are error from access to Web Service, Could you advise if what is the problem is possible for this point. thank
Sokneang SAM
------------------------------------
Reply:
------------------------------------
Reply:
Sokneang SAM
------------------------------------
Groups in Skype for Business using Powershell
We have just implemented Skype for Business and i'm looking for a way i can add a groups into users contact lists through Powershell.
I cant see much online to do with SFB and im not too keen on using 3rd party tools, powershell would be my first choice.
For example, if i had "User 1" and they were part of an AD group called "Support" i would like it so when they login for the first time, they see the "Support" group with all the users in it.
Is that possible?
Reply:
I don't see how Skype can do this. You need to add the group to the users contact list. If you want to list the users in the group then make a global contact list from the group.
First spend some time learning how Exchange online works with Skype and how to provision users for mail. You will find that mail contacts are part of Skype if set up correctly.
Here is what is available for PowerShell/Skype: https://technet.microsoft.com/en-us/library/dn362831(v=ocs.15).aspx
\_(ツ)_/
------------------------------------
Reply:
Here is the common thinking on what you are trying to do: http://www.skypeadmin.com/2015/04/13/pre-populate-contacts-lync-skype/
\_(ツ)_/
------------------------------------
Windows 7/XP users need to install the printer driver frequently from Windows Server 2003 32 bit operating system
Hi,
I have many Windows 7 and Windows XP users that needs to install the printer driver when they want to print from a network printer from Windows Server 2003 SP2 server. This happens frequently althought the print queue is established before. The error is as follows.
Error Message: "Do you trust this printer? Windows needs to download and install a software driver from the \\servername computer to print to PRINTERNAME. Proceed only if you trust the \\servername computer and the network, and then restart the print job."
Please let me know how to fix this issue.
Thank you,
Nikki.
Nilakshi S. Batuwitage
Reply:
If the server is 2003 cluster, I'd expect this. I've seen this issue with some older Xerox drivers that update a config file on the server that the client spooler downloads from the server.
You can change the Point and Print restrictions policies so the client will just copy the driver without the prompt or you can use package aware drivers from the print vendor so you will not be prompted on Windows 7.
Alan Morris Windows Printing Team
------------------------------------
Reply:
Hi Alan,
We do not have a cluster. This happens on HP, RICOH, CANON printers. Do you think changing the Point and Print restrictions policies will work for us?
Thank you,
Nikki.
Nilakshi S. Batuwitage
------------------------------------
Reply:
Yes. If you have more than 50 clients be sure to set this up in a common GPO that all machines read.
If you do not have a Server 2008 R2 machine to edit the GPO, you will need the AD tools for Windows 7 so you can see the computer policy to edit.
Computer / Administrative Templates / Printers / Point and Print Restrictions for Vista and Windows 7
User / Administrative Templates / Control Panel / Printers / Point and Print Restrictions for XP
Default configuration is not configured so I would expect the XP machines not to display a prompt unless the print server is in a different forest than the client machines.
This policy setting controls the client Point and Print behavior, including the security prompts for Windows Vista computers. The policy setting applies only to non-Print Administrator clients, and only to computers that are members of a domain.
When the policy setting is enabled:
-Windows XP and later clients will only download print driver components from a list of explicitly named servers. If a compatible print driver is available on the client, a printer connection will be made. If a compatible print driver is not available on the client, no connection will be made.
-You can configure Windows Vista clients so that security warnings and elevated command prompts do not appear when users Point and Print, or when printer connection drivers need to be updated.
When the policy setting is not configured:
-Windows Vista client computers can point and print to any server.
-Windows Vista computers will show a warning and an elevated command prompt when users create a printer connection to any server using Point and Print.
-Windows Vista computers will show a warning and an elevated command prompt when an existing printer connection driver needs to be updated.
-Windows Server 2003 and Windows XP client computers can create a printer connection to any server in their forest using Point and Print.
When the policy setting is disabled:
-Windows Vista client computers can create a printer connection to any server using Point and Print.
-Windows Vista computers will not show a warning or an elevated command prompt when users create a printer connection to any server using Point and Print.
-Windows Vista computers will not show a warning or an elevated command prompt when an existing printer connection driver needs to be updated.
-Windows Server 2003 and Windows XP client computers can create a printer connection to any server using Point and Print.
-The "Users can only point and print to computers in their forest" setting applies only to Windows Server 2003 and Windows XP SP1 (and later service packs).
Alan Morris Windows Printing Team
------------------------------------
Reply:
Hi Alan,
I have a Windows Server 2003 SP2 server with 32 bit operating system (No cluster) and when Windows 7/XP 32 bit users print to this server, the users get the following error.
Error Message: "Do you trust this printer? Windows needs to download and install a software driver from the \\servername computer to print to PRINTERNAME. Proceed only if you trust the \\servername computer and the network, and then restart the print job."
This happens even if the print queue is established already and it happens only to 32 bit operating systems clients only(Windows 7/XP).
Alan, will the above fix work for my situation?
Thank You,
Nikki.
Nilakshi S. Batuwitage
------------------------------------
Reply:
Hi Nikki,
Thanks for the post.
I think the solution provided by Alan can fix this issue. Please take the time to try on it.
Please feel free to let us know if there is any update on this issue.
Thanks,
Miles
Please remember to click "Mark as Answer" on the post that helps you, and to click "Unmark as Answer" if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.
------------------------------------
Reply:
Hi,
The solution provided by Alan did not fix the issue as it came back. It is a RICOH scanner/copier. Please let me know of any other solution. The users has to keep installing the driver over and over again.
Thank you,
Nikki.
Nilakshi S. Batuwitage
------------------------------------
Reply:
Hi,
I noticed that there are two drivers on the server for the same printer, this is a RICOH printer, and one printer driver is from RICOH and the other driver is a universal driver. Could this be an issue as it asks to install the driver although it is already installed?
Thank you,
Nikki.
Nilakshi S. Batuwitage
------------------------------------
Reply:
Hi Nikki03,
I am having a similar issue. I have a Win 2008 x64 print server. I installed mostly HP printers on it but do have a few Ricoh printers. All my HP devices print fine from WinXP and Win 7 x64 computers. However I run into a similar problem with the Ricoh devices. I am able to add the Ricoh driver to the print server no problem, but when I try to add the printer to a computer as a NON admin, I get the prompt to install driver. However, the driver install fails as my users are not admin. We can get around this easy by logging into the computer as an admin, installing the printer, and then having the user log back in and install the printer. I am curious as to why the Ricoh's prompt for the driver install and all our HP printers do not.
I am wondering if the Ricoh driver is trying to install more than DLLs? That is the only thing I can think of. On a side note, I had tried almost all print drivers Ricoh offers, and all of them have this behavior.
David
------------------------------------
Reply:
Alan Morris Windows Printing Team
------------------------------------
Reply:
------------------------------------
Reply:
Basically when printmanagement.msc lists them as Packaged = true. Any of the print drivers included with Windows since Vista can only be packaged aware drivers.
http://blogs.technet.com/b/askperf/archive/2008/02/12/ws2008-printer-driver-packages.aspx
http://blogs.technet.com/b/askperf/archive/2007/05/04/windows-vista-point-print.aspx
Alan Morris Windows Printing Team
------------------------------------
Reply:
So do we have a solution for this? We are having the same issue with new HP workstations and laptops, using Windows 7 and a RICOH Aficio MP using the C5000 PCL 5c driver..
All machines are fully patched, and the File and print is 2003 server - fully patched.
First print job of the day we get
'Error Message: "Do you trust this printer? Windows needs to download and install a software driver from the\\servername computer to print to PRINTERNAME. Proceed only if you trust the\\servername computer and the network, and then restart the print job."
Even with the tick 'dont show this again', it does.
Ideas?
------------------------------------
Reply:
Hi,
We're just going through a print driver migration program and came across this issue with our Windows 7 users. We're running Server 3003 SP2 and when a 'clean' build, i.e. with the print driver having not already been installed previously, the "Do you trust this printer" dialogue box appeared, and the install failed due to insufficient privialiges.
The reason we were so confused is because we have a couple of Server 2008 print servers set up as we're also going to be doing a Print Server upgrade early next year. It seems that teh issue doesn't exist when pulling drivers from a Server 2008 box, and once the client machine has done that it will then also happily pull drivers, without receiving the "Do you trust this printer" prompt, from a Server 2003 box because the drivers are already on the machine.
We resolved the issue by updating the GPO as per the update by Alan Morris. We updated the default domain computer policy to have the "Point and Print Restrictions" set to "Enabled" with the option "Users can only Point and Print to machines in their forest" checked. We also changed both the Security promt options to "Do not show warning or elevation prompt" but to be honest, we tested with these options left blank, as well as changing them to prompt the warnings but the behaviour was exactly the same for all = the standard user saw no prompts, and the driver installed fine as it had previously in XP (which is exactly what we wanted).
One 'interesting' point was that the user based policy setting has no effect what-so-ever even though it appears to be identical to the comuter policy. The subtle difference is that the computer policy states "Supported on: At least Windows Vista" and the user policy states "Supported on: Supported Windows XP SP1 through Windows Server 2008 RTM".
I would advise that Alan's reply above is marked as the correct answer.
HTH,
Tim.
- Edited by Mace_y2k Monday, October 24, 2011 10:36 AM
------------------------------------
Reply:
Hi Alan,
Would this also solve our similar issue/
Server 2003 sp2
Ricoh printers/scanner/copiers
drivers install fine on our xp machines
however the win 7 computers on logging on get the error "operation could not be completed (error 0x00000709). double check the printer name and make sure that the printer is connected to the network"
------------------------------------
Reply:
You get this error during Logon or when adding the printer connections?
The driver will not be installed on the Windows 7 clients without user interaction if you have not configured the Computer Point and Print restrictions policy.
If you get this error when searching in the domain for printers, make sure the clients can actually reach the print server. Start / Run / \\printservername
This will open an explorer window displaying the list of shares on the machine.
If the clients cannot open the remote printserver, check client DNS settings.
Alan Morris Windows Printing Team
------------------------------------
Reply:
Hi,
I would like to refresh problem.
I have WinXP installed with shared printers (for some reasons I cannot setup 2003/2008 server) and I would like to add preinstalled drivers for Win7 x64. I understand all issues with adding drivers for different OSes, but I stuck with adding Win7 (does not matter x86 or x64) driver for automatic installation of drivers for Win7. There is no Intel envronment Windows 7 version on "Additional drivers" dialog :(
Is it possible somehow to add it?
Right now users have to use "connect..." option for installing printers on Win7 and then when they are informed that there is not preinstalled drivers on server they have to use "Use disk" option for pointing drivers and I would like to avoid this. It would be perfect if drivers would be installed automatically as they are installed on WinXP OSes.
------------------------------------
Reply:
Alan Morris Windows Printing Team
------------------------------------
Reply:
I am also experiencing similar issue's, the Printer is installed on the machines, they have Local Admin rights. The Print Server is 2008R2, the machines are Windows 7, the initial install goes through fine.
The strange thing is, every couple of days the printer will pop up asking you to update the driver, yet nothing has changed. The drivers can then be OK for a couple of days before seeing this again.
You get an "Do you trust this printer" message, you click install and it installs fine. The question is, how do i stop the prompt appearing every couple of days? This is effecting around 200 users.Thanks,
Grant
------------------------------------
Reply:
Never found a solution to it, the users just have to suck it up.
------------------------------------
Reply:
Hi Bruce and everybody.
I faced a similar problem with Canon printers on a Windows Server 2012 R2 x64 Print Server. I found a tip on this link and it solved my problem: https://social.technet.microsoft.com/Forums/en-US/030ee94a-047d-460a-bc39-52351a199364/kb3163912-breaks-point-and-print-restrictions-gpo-settings?forum=winserverGP
Basically, I followed this: "Edit the register on your print server(s). If you change the value of the key PrinterDriverAttributes under HKLM\System\CurrentControlSet\Control\Print\Enviroments\Windowsx64\Drivers\...\Driver name\ and restart the print server, you are able to make Windows treat the driver as packaged, and it will install unattended with gpo. The hex number has to be odd. To keep the original settings for the printer driver and only make it Pakage aware you shold add 1 to the original value of PrinterDriverAttributes. In my print enviroment the original attribute had the value 4, so I changed it to 5 and that made it Pakage aware. Different versions of the driver (and different vendors) might need other values.
Restart server ."
I hope you find a solution (sorry for my english).
- Edited by Mauro Destazio Thursday, December 8, 2016 11:29 AM
------------------------------------
Reply:
Hi Bruce and everybody.
I faced a similar problem with Canon printers on a Windows Server 2012 R2 x64 Print Server. I found a tip on this link and it solved my problem: https://social.technet.microsoft.com/Forums/en-US/030ee94a-047d-460a-bc39-52351a199364/kb3163912-breaks-point-and-print-restrictions-gpo-settings?forum=winserverGP
Basically, I followed this: "Edit the register on your print server(s). If you change the value of the key PrinterDriverAttributes under HKLM\System\CurrentControlSet\Control\Print\Enviroments\Windowsx64\Drivers\...\Driver name\ and restart the print server, you are able to make Windows treat the driver as packaged, and it will install unattended with gpo. The hex number has to be odd. To keep the original settings for the printer driver and only make it Pakage aware you shold add 1 to the original value of PrinterDriverAttributes. In my print enviroment the original attribute had the value 4, so I changed it to 5 and that made it Pakage aware. Different versions of the driver (and different vendors) might need other values.
Restart server ."I hope you find a solution (sorry for my english).
------------------------------------
Reply:
Agree with Alan, most probably hotfix KB3170455 installed on W7 client machines prevents installing unsigned print drivers, or print drivers that are not package aware.
To check this, run wmic qfe get hotfixid | find "KB3170455"
Best solution: update your drivers to signed and package aware versions
Workaround : do registry trick described by Mauro Destazio above.
More details on subject:
https://technet.microsoft.com/library/security/ms16-087
http://forum.support.xerox.com/t5/Printing/FYI-Unable-to-install-client-drivers-in-some-environments-after/m-p/195233#M12439
Kind regards,
Sergey.
- Edited by Sergey Shaleniy Tuesday, May 30, 2017 9:53 AM
------------------------------------
web.config error
I try to run my solution but this shows an error in web.config
Could not load file or assembly 'System.ServiceModel, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089' or one of its dependencies. The system cannot find the file specified.
this is web.config
<?xml version="1.0"?>
<configuration>
<system.web>
<compilation debug="true" targetFramework="4.0"/>
<httpRuntime/>
<pages controlRenderingCompatibilityVersion="3.5" clientIDMode="AutoID"/>
</system.web>
</configuration>
- Moved by Jack Zhai-MSFTMicrosoft contingent staff Tuesday, June 6, 2017 9:28 AM
- Changed type Dave PatrickMVP Tuesday, June 13, 2017 2:10 PM drive by
Reply:
Hi rebmaamberrebmaamber，
Is it related to the WCF or Web app?
Could you find this assembly in your solution explorer window->Reference folder?
Maybe you could remove and re-add it again, and then set the copy local=true, debug it.
Not very sure that which VS version you use, but please also make sure that it was not related to the .NET Framework version.
Since you get this issue during you run this app, it would be not the VS debugger issue, if above suggestions still have no help, just tell me the real project type, I will help you find a more appropriate developing forum.
Best Regards,
Jack
MSDN Community Support
Please remember to click "Mark as Answer" the responses that resolved your issue, and to click "Unmark as Answer" if not. This can be beneficial to other community members reading this thread. If you have any compliments or complaints to MSDN Support, feel free to contact MSDNFSF@microsoft.com.
------------------------------------
Microsoft Sculpt keyboard reverse Fn keys
Hi,
I have just got my new Microsoft sculpt mobile keyboard, and it works fine.
However the Fn keys are reversed by design. I mean by pressing F6 for example, the Search charm appears on Windows 8, and i can use F6 if i press the Fn key together with it. Is there any way i can change how it works? It would be verry important for me, i lost many hotkey combination this way :\
Thanks,
Tamás
- Changed type Niki Han Friday, June 7, 2013 7:57 AM
Reply:
Tamas
You will probably have to change the Fn feature in the BIOS.
To do this, when you switch on look for a Setup message indicating which key to start tapping - F2 and Del are commonly used.
------------------------------------
Reply:
Thanks for the answer, i know that some laptop contains these settings, but i'm on a desktop PC. I could not find any settings related to action keys in the BIOS.
I have ASUS EFI setup. Any other idea?
Thanks,
Tamás
------------------------------------
Reply:
This site looks encouraging http://superuser.com/questions/458263/fn-key-combinations-dont-work-on-asus-laptop-on-windows-8/517469#517469
Also ASUS downloads here http://www.service.asus.com/#!Downloads/c1wax
- Edited by BurrWalnut Saturday, June 1, 2013 6:23 PM
------------------------------------
Reply:
That forum link is also about laptop drivers, that did not help me.
Which download do you think could help me? I have Asus P8Z77-V motherboard.
Isn't there any solution from Microsoft? Since it's a Microsoft product, i have problem with :\
I found a keyboard Mapping tool MSKLC, but it doesnt seems to be able edit function keys.
------------------------------------
Reply:
Hi Tamás,
As the question is related to hardware, it is recommended to contact Microsoft Hardware support for assistance.
Microsoft Hardware Support
http://www.microsoft.com/hardware/en-us/support
Thanks for your understanding.
Niki Han
TechNet Community Support
------------------------------------
Reply:
Hi,
Can you please help me and find the email address of the technical support? Since there is no phone number from my country, i would rather contact Microsoft by email, but i couldn't find any address, and the support site did not help me in the upper question.
Thanks,
Tamás
------------------------------------
Reply:
I called MS Level 2 support. No help to be had there. But by all means, call them so they know this is a design oversight. See this thread:
------------------------------------
Reply:
HI,
Tamás I have the same issue, i found some forum, but not found solution.
for example: http://answers.microsoft.com/en-us/windows/forum/windows_8-hardware/sculpt-comfort-keyboard-is-not-working/0e08223f-14e3-4ca3-aa04-f91eddff1f35?page=2&auth=1
and there is another sofware utility https://autohotkey.com/ and someone made a script for this type of keyboard: https://gist.github.com/tehshane/8765405
I didnt test it yet.
But if you find a better solution please contact me.
Thx, Rewonka (from Hungary :)
------------------------------------
Reply:
Hi!
Thanks for the links, i'll give a shot to the ID replacing magic at your thread. Did you succeed with that?
I would rather not install autohotkey, or any third party software ___ just to use my keyboard ___.
It's a 2,5 year old topic, i have long abandoned any hope of making this keyboard work as expected :P For me it's only useful for controling the volume when watching movies from the couch... A bit expensive remote control thought...
Thanks,
Tamás
------------------------------------
Reply:
To disable, or enable, the function key (fn) in the BIOS, do the following steps.
- Shutdown your computer
- Press the power button to turn on the computer.
- Press the f10 key to open the BIOS setup window.
- Press the right-arrow or left-arrow keys to navigate to the System Configuration option.
- Press the up-arrow or down-arrow keys to navigate to the Action Keys Mode option, and then press the enter key to display the Enable / Disable menu. (Disable to reverse the fn key function).
- Select the desired mode:
- Disabled: Requires pressing and holding the function key (fn) while pressing one of the f1 through f12 keys to use the action indicated on the action key.
For example, on some computer models, if the Action Keys Mode is Disabled, pressing the f11 key will minimize and maximize a web browser if open. Alternatively, pressing and holding the fn + f11 keys will mute the sound.
The action keys may vary depending on the model of notebook.
- Enabled: Requires pressing only one of the f1 through f12 keys to use the action as indicated on the action key.
For example, on some computer models, if the Action Keys Mode is Enabled, pressing f11 will mute the sound as indicated on the action key. Alternatively, pressing and holding fn + f11 will minimize and maximize a web browser if open.
The action keys may vary depending on the model of notebook.
- Press the f10 key to save the selection and restart the computer.
The function key (fn) option can be reset at any time.
------------------------------------
Add permission to directory for same user account name in different Domain
I am looking to retire a domain controller in DomainC with 1500 user directories on it. To do this i must first add the same user account from DomainB with full control and domain admins from DomainB of the same directory and push inheritance down the directory for the user.
Ive been looking at a lot of powershell scripts but cant find anything that does this and breaks down the script.
Would anyone be kind enough to share a script that could accomplish this with me
Brian
- Changed type Bill_Stewart Friday, July 7, 2017 6:55 PM
- Moved by Bill_Stewart Friday, July 7, 2017 6:56 PM This is not "scripts on demand"
Reply:
Read this first, from right at the top of this forum:
This forum is for scripting questions rather than script requests
-- Bill Stewart [Bill_Stewart]
------------------------------------
Reply:
Microsoft has a free domain migration tool that will do this very seamlessly.
https://www.microsoft.com/en-us/download/details.aspx?id=19188
https://connect.microsoft.com/site1164/program8540
\_(ツ)_/
------------------------------------
Patch Deployment Through the SCCM 2012
Reply:
- Edited by Nick HogarthMVP Thursday, April 20, 2017 4:45 AM
------------------------------------
Reply:
Hello r4ravi
you can check this link
https://www.windows-noob.com/forums/topic/4045-step-by-step-guides-system-center-2012-r2-configuration-manager/
is a guide step by step of software updates deployments through SCCM 2012.
regards
------------------------------------
How to determine is all 9's
Hi Team,
I have to identify if a number is all 9's, the number can be anywhere between 3 - 9 digit number.
Thanks,
Eshwar.
- Edited by Eswararao C Monday, May 29, 2017 2:33 PM
Reply:
If the data type is integer, you can use IN:
WHERE IntColumn IN(999,9999,99999,999999,9999999,99999999,999999999)
For varchar:
WHERE VarcharColumn NOT LIKE '%[^9]%'
You could also use the NOT LIKE method with an int type along with CAST:
WHERE CAST(IntColumn AS varchar(9)) NOT LIKE '%[^9]%'
Dan Guzman, Data Platform MVP, http://www.dbdelta.com
------------------------------------
Reply:
For varchar you can also use below method:
WHERE LEN(REPLACE(ColumnName,'9','')) = 0
- Edited by SQLNeophyte Monday, May 29, 2017 4:17 PM
------------------------------------
Writing a domain specific programming lanuage for project management, looking for inspiration
Hello everyone.
I'm finishing my bachelor studies in Computer Science and as a part of my thesis I will be writing a domain-specific programming language, designed specifically for project management in Microsoft Project. In the final version you would have a command line (or an editor in which you would write and run the code, not sure about that one yet) inside Project in which, after writing some code or loading a script file with more code than one line, you could add or manipulate tasks in your current project or do some other stuff. The problem is that I didn't have too much experience with Project, so I don't really know what should be the "other stuff".
I think majority of the community here is much more experienced with Project than I am, so I'm looking for inspiration. What are some things in Project that could be automated or easier to do by writing some code instead of using dialog windows? I know there is a Macro Editor in which you use Visual Basic, but I want my language to be way simpler and cleaner than VB (though obviously the whole Project plugin won't be as powerful as Macro Editor, at least not right away ;)).
I would really appreciate your input.
Pawel
Reply:
Helllo PawelDab
Leveling resource loads within a project has never been an easy thing to do in project. There is a resource leveling tool within project pro to do this. It does a so so job. If you can come up with a better mouse trap with leveling and managing resource loads, that could be an addin to project would be great
Michael Wharton, MVP, MBA, PMP, MCT, MCTS, MCSD, MCSE+I, MCDBA
Website http://www.WhartonComputer.com
Blog http://MyProjectExpert.com contains my field notes and SQL queries
------------------------------------
Reply:
Hi Pawel,
My 2 cents: Conditional formatting for MS Project.
Currently, you can add custom fields to indicate certain conditions, but this IMO leads to clutering. Conditional formating on the task column, or start/finish colums would be a great addition.
Another useful functionality, which now requires a lot of scrolling is checking whether a tasks predecessors are completed. If this "status" could be easily obtained with a command line, that would be a great time saver.
I've coded something like this in vba; it sets a flag if all predecessors are finished and if not, it returns the rownumber of the unfinished predecessor:
Sub PredecessorCheck() Dim ReadyToGo As Boolean Dim tsk As Task Dim TskPred As Task Dim Predecessor As String For Each tsk In ActiveProject.Tasks If Not tsk Is Nothing Then If tsk.PercentComplete <> 100 And tsk.PredecessorTasks.Count > 0 And tsk.Summary = False Then 'Only if incomplete task with links ReadyToGo = True Predecessor = vbNullString For Each TskPred In tsk.PredecessorTasks If TskPred.PercentComplete < 100 Then ReadyToGo = False If Not Len(Predecessor) = 0 Then Predecessor = Predecessor & ", " End If Predecessor = Predecessor & TskPred.ID End If Next TskPred tsk.Text6 = Predecessor If ReadyToGo Then tsk.Flag6 = True tsk.Text6 = "None" Else tsk.Flag6 = False End If End If End If Next tsk End Sub
Rg,
Andre
- Edited by Huismu5 Monday, May 29, 2017 5:29 PM Added suggestion
------------------------------------
Windows 2016 servers with name resolution issues
Hello,
We have several Windows Servers 2016 with Directory Services and DNS roles installed only, fully patched, IPV6 disabled, Firewall profiles off. If servers are rebooted, ping requests stop working with the following error, no matter what is pinged. We have tried with ping -4 <name_to_resolve> to discard IPV6 issues:
Error: Ping request could not find host <name_to_resolve>. Please check the name and try again
However, nslookup resolves the name properly.
We have run ipconfig /flushdns and keep having the same problem.
The only fix we have found so far is: restart DNS client on the client machines with the problem and run ipconfig /flushdns afterwards.
Is there a permanent fix for this issue?
Thank you.
Reply:
------------------------------------
Error accessing OneDrive prgrammatically - SCRIPT7002: XMLHttpRequest: Network Error 0x80070005, Access is denied.
I am running the following code on a content editor web part on web application http://webapp1/pages/default.aspx
<html>
<head>
<script type="text/javascript" src="https://webapp1/Documents/JS/jquery-1.7.2.min.js"></script>
<script type="text/javascript">
getOneDriveFiles();
function getOneDriveFiles() {
$.ajax( {
url: "https://mysitewebapp/personal/networkid/_api/web/lists/getByTitle('Documents')/items?$select=FileLeafRef,File/Name,File/Title&$expand=File",
headers: {
"accept": "application/json;odata=verbose",
"content-type":"application/json;odata=verbose",
"X-RequestDigest": jQuery("#__REQUESTDIGEST").val()
},
success: getFilesSeccess,
error: getFilesError
});
}
function getFilesSeccess(data)
{
var html = "";
var folResult = jsonObject.d.results;
for (var i=0; i<folResult.length; i++)
{
//building html to show all files and folders of One Drive in the web page
}
*/
document.getElementById("OD").innerHTML = html;
}
function getFilesError(data,errorcode,errormessage)
{
alert("Couldn't get the files " + data + errorcode + errormessage);
}
</script>
<title></title></head>
<body>
<div id="OD">One Drive Files</div>
</body>
</html>
-----
The user has access to webapp1 and mysitewebapp. When the user opens https://mysitewebapp/personal/networkid/_api/web/lists/getByTitle('Documents')/items?$select=FileLeafRef,File/Name,File/Title&$expand=File in IE it returns the results.
Not sure why access Denied. Both the web applications are in the same farm and in the same domain. Please assist. Thank you
- Edited by Roberto Junior S Monday, May 29, 2017 10:43 AM
Calculated Column return column name and value
Hi, from SharePoint List,
How can I get column name of the Max value?
e.g: =MAX(VALUE([Raw FCS]),VALUE([Raw ECS]),VALUE([Raw LCS]),VALUE([Raw PCS]),VALUE([Raw RCS]))*VALUE([Raw Likelihood Score]) return the Max Value of these 5 value.
How to get the column name of the this value?
kind regards
Reply:
Sorry
this is the exemple: =MAX(VALUE([col1]),VALUE([col2]),VALUE([col3]),VALUE([col4]),VALUE([col15])).
I need the the formula which return Col1 or Col2. the which which get the max value.
Thank you for your help
------------------------------------
No comments:
Post a Comment