Tuesday, February 22, 2022

Photos on my computer

Photos on my computer

I want to take a picture of myself and store it in browse file on my computer to be used when ever I need it.

Reply:
Can you tell me how to take a photo of myself with my laptop and then save it in a file to be used later.

------------------------------------
Reply:

Hi,

This will depend on the software you have installed for the webcam. Most webcam programs will have a icon for "take picture" or something similar. Click on that icon or button to take a picture.

If you don't see an option for taking a picture check your webcam manual, or go to the manufacturers website for instructions.

Note: If you want to use webcam to take a picture, I suggest you contact the manufacture, because different models have different interfaces. Or visit its official website, you may find some guide of using this webcam.

Hope this help you.

Thanks & Best Regards,

Mohammed Imtiyaz Ali


------------------------------------
Reply:

Hi,

Just as Mohammend said, before you begin to take a photo, you must make sure the two points. First, you have a webcam. Second, you have installed a webcam program on your PC. Such like Windows live messenger, Skype, TinCam, Etc.

Hope this helps.

Regards.

Spencer

TechNet Community Support


------------------------------------

Duplicate EFS files using USMT 4 /efs:hardlink

Have a weird thing happening....

We are using an SCCM MDT 2012 Task sequence with USMT 4.

When we run an online USMT everything is fine. When I run an offline USMT, EFS encrypted files in the user profiles are duplicated so they have myword.doc & myword (1).doc. Encrypted files outside of the user profiles dont duplicate.  I thought it may have been some issue with the migdoc's xml but as it works fine online I dont think there can be an issue with it...

Very strange & open to suggestions!

George

Writing to spanned volume extremely slow and makes clients unresponsive

Hi,

I'm running Windows Server 2008 R2 with a SSD boot drive, and 7 2TB disks. 5 of the disks are simple volumes, some split into multiple partitions, some single partition, and two identical drives (same model and revision - ST2000DM003), that have been configured as a spanned voumes.

All services packs and patches have been installed.

There are half a dozen windows 7 clients connecting to this server.

The server runs IIS, Firebird DB, WSUS 3 and a couple of other minor apps. The motherboard is an ASROCK Fatality Z77 Professional with Dual Gigabit NICS running LBFO.

The Mobo has 10 sata ports, 6 of which are sata3. The two drives used for the spanned volume are on consecutive sata3 ports. (Asmedia 0 and 1).

When writing data (copying files), from ANY client PC to the spanned volume the speeds are anywhere from 50KB/s to 5MB/s, and the client becomes completely unresponsive for the duration of the copy. A 150mb file might take 3 minutes to copy during which time even moving the mouse takes 10 seconds or more. Once the copy completes the client becomes responsive.

writing data to any other volume has no detectable impact to the responsiveness of the client. Copy will typically write at 60MB/s to 105MB/s, depending on the size and type of data.

I've tried various things like turning off Remote differential compression, autotuning etc as suggested on some forums, and disabled my virus software. But these have not helped.

Which might be causing this and how can I fix this?

EDIT: The infrastructure is cat6 gigabit cabling throughout with Gigabit switches.

thanks

Tanya





  • Edited by TanyaM0205 Friday, October 26, 2012 3:35 AM

Reply:

Hi Tanya,

How much data are saved on this spanned volume? You could try to run a check disk on that volume to see if there is any issue need to be fixed.

Also if there is no much data on the spanned volume, you could have a try to recreate it after formating the 2 disks.

TechNet Subscriber Support in forum |If you have any feedback on our support, please contact tnmff@microsoft.com.


------------------------------------
Reply:

Hi,

Thanks for your reply.

I had previously run the SeaTools utility to check the disks and they passed all tests.

There is 2TB data on the volume, just over 50% full.


------------------------------------
Reply:

Hi,

Well, I think I've found the solution. The clue was in the Motherboard as stated in the original post. The ASROCK mobo uses an intel chipset. That chipset comes with a utility called Intel Rapid Storage Technology (or RST). It definately is NOT rapid. After numerous reinstalled and trial and error with with various components and combinations I found that removing the RST drivers seems to have solved the problem.

Nothing on the Intel or ASROCK sites about known problems, compatability issues or conflicts, that I could find.

Tanya


------------------------------------

XenApp published Internet explorer, went to a sharepoint site, and then asked for document to be edited in excel. I got error

I went to XenApp 6.5 publised Internet explorer, went to a sharepoint site, and then asked for document to be edited in excel.  I got "The document could not be opened for editing. A Microsoft SharePoint Foundation compatible application could not be found to edit the document." error.

I am able to edit my doc when trying to edit it from XenApp worker server directly howver nto able to edit if accessign the doc from IE which is published from same server.

Any help woudl be greatly appriciated. 


Reply:
I am having the same problem.  Any help????

------------------------------------
Reply:
yes,I am having the same problem. Any help?

------------------------------------

Error while creating criteria based members set

Hi

Am able to create manual mebership set

But unable to create criteria based

Error while submitting :Error processing your request: The server was unwilling to perform the requested operation.
Reason: Unspecified.
Attributes:
Correlation Id: dea87d5e-b9b6-4e45-9bc9-0d22f528de70
Request Id:
Details: Request could not be dispatched.

Event

Log Name:      Forefront Identity Manager
Source:        Microsoft.ResourceManagement
Date:          11/8/2012 9:53:40 AM
Event ID:      3
Task Category: None
Level:         Error
Keywords:      Classic
User:          N/A
Computer:      FIM

Description:
Reraised Error

Windows 8 Professional

Hey, good afternoon!

Im looking for some help i cant make the download of windows 8 professional in msdn, this is the second time that im trying to make it, the software secure manager tells that i have to make the download again but i it fails again, somebody knows whats going on?

Thanks...

  • Moved by Bob Wu-MT Wednesday, November 7, 2012 5:16 AM (From:ClickOnce and Setup & Deployment Projects)
  • Changed type Arthur Xie Tuesday, November 20, 2012 8:50 AM

Reply:

Hi Rodrigonc22,

According to your description, this is a Windows 8 TechNet issue. I move it to Windows 8 General forum for better support.

Best Regards,

Bob Wu [MSFT]
MSDN Community Support | Feedback to us


------------------------------------
Reply:

If you are MSDN Subscription, please contact the support from the following website.

http://msdn.microsoft.com/en-us/subscriptions/aa948874

Please remember to click "Mark as Answer" on the post that helps you, and to click "Unmark as Answer" if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. "


------------------------------------

BranchCache FAQ available in TechNet Wiki, just FYI

Hi there

The topic BranchCache Frequently Asked Questions is now available at http://social.technet.microsoft.com/wiki/contents/articles/14309.branchcache-frequently-asked-questions.aspx.

Thanks -

James McIllece


Reply:

The link above isn't working due to the period being added in the link. Here's the correct link:

http://social.technet.microsoft.com/wiki/contents/articles/14309.branchcache-frequently-asked-questions.aspx

Thanks -

James McIllece


------------------------------------
Reply:

Hi,

Great!

Thanks for you sharing.

Regards,

Yan Li

Yan Li

TechNet Community Support


------------------------------------

October Windows Updates breaking WSUS 3.0 SP2 (on 2008 R2) - fixed by *reinstalling* KB2720211

Client reporting to WSUS has broken after latest WSUS server patch; may or may not also affect updating

Error seen on all clients subsequently in windowsupdate.log -

System.Data.SqlClient.SqlException: Cannot open database "SUSDB" requested by the login. The login failed.

Login failed for user 'NT AUTHORITY\NETWORK SERVICE'.

Issue appears to have started immediately following patching of WSUS server with these 7 updates only (October 2012) -

2012-11-02 03:00:10:696 984 bf4 Agent * Title = Security Update for Windows Server 2008 R2 x64 Edition (KB2724197)

2012-11-02 03:00:10:696 984 bf4 Agent * Title = Update for Windows Server 2008 R2 x64 Edition (KB2661254)

2012-11-02 03:00:10:696 984 bf4 Agent * Title = Update for Windows Server 2008 R2 x64 Edition (KB2749655)

2012-11-02 03:00:10:696 984 bf4 Agent * Title = Security Update for Windows Server 2008 R2 x64 Edition (KB2705219)

2012-11-02 03:00:10:696 984 bf4 Agent * Title = Update for Windows Server 2008 R2 x64 Edition (KB2756822)

2012-11-02 03:00:10:696 984 bf4 Agent * Title = Security Update for Windows Server 2008 R2 x64 Edition (KB2743555)

2012-11-02 03:00:10:696 984 bf4 Agent * Title = Security Update for Windows Server 2008 R2 x64 Edition (KB2731847)

KB2720211 had already been applied in June 2012.

However, reapplied KB2720211 (from KB page download), and clients immediately started reporting in again.

Hope this helps someone.


Reply:

Thanks for your sharing.

regards,

Clarence

Please remember to click "Mark as Answer" on the post that helps you, and to click "Unmark as Answer" if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.


------------------------------------

The adapter "MSMQ" raised an error message. Details "Remote computer is not available.".

Hi Team

i am trying to read the message from a non transcational private Q from a Biztalk 2010 machine. And getting the following error: I have given full access to everyone and anonymous logon to the queue.

The adapter "MSMQ" raised an error message. Details "Failed to get the Logon User because it was invalid.

Please verify the domain, username or password is valid. ".

Please help.

Deepak Sanghi Happy Biztalking.........



Reply:

Make sure you specify the appropriate queue address.

FORMATNAME:DIRECT=OS:<server name>\PRIVATE$\<queue name>

Additional Information: http://msdn.microsoft.com/en-us/library/windows/desktop/ms700996(v=vs.85).aspx

David Downing... If this answers your question, please Mark as the Answer. If this post is helpful, please vote as helpful.



------------------------------------
Reply:
Yes it is in this format only.

Deepak Sanghi Happy Biztalking.........


------------------------------------
Reply:
Is this a local queue or is it on another server?

David Downing... If this answers your question, please Mark as the Answer. If this post is helpful, please vote as helpful.


------------------------------------
Reply:
Remote.........

Deepak Sanghi Happy Biztalking.........


------------------------------------
Reply:

Are you running the BizTalk Host Instance using a local service account or a domain account?

You can try running your BizTalk host instance using your domain account temporarily to determine if there are security issues.  If this works, then you can create a domain account that can be used as a service account for securable domain objects like MSMQ queues.

David Downing... If this answers your question, please Mark as the Answer. If this post is helpful, please vote as helpful.



------------------------------------
Reply:
I tried with local as well as domain account, but it is failing with same error.

Deepak Sanghi Happy Biztalking.........


------------------------------------
Reply:

Just to be sure, you do have Message Queuing (at least the client) installed on the BizTalk Server, correct?  If so, perhaps the next thing to check is the ports used by MSMQ.  See the following: http://support.microsoft.com/kb/178517/EN-US

David Downing... If this answers your question, please Mark as the Answer. If this post is helpful, please vote as helpful.


------------------------------------
Reply:
Try to set up the permissions for this queue adding the Everyone account with Full Control.

Leonid Ganeline [BizTalk MVP] BizTalkien: Naming Conventions for the BizTalk Solutions


------------------------------------
Reply:
I have given Anonymous as well as Everyone full control over the queue.

Deepak Sanghi Happy Biztalking.........


------------------------------------
Reply:
Can you try removing Anonymous access, run the BizTalk host instance under your domain account, and add this specific account with full control to the queue?  If you receive a different error, please post the new error.

David Downing... If this answers your question, please Mark as the Answer. If this post is helpful, please vote as helpful.


------------------------------------
Reply:
No luck... Same error.

Deepak Sanghi Happy Biztalking.........


------------------------------------
Reply:

I'm running out of ideas... did you try specifying the logon information in the MSMQ adapter configuration?

David Downing... If this answers your question, please Mark as the Answer. If this post is helpful, please vote as helpful.



------------------------------------
Reply:

Yes i tried this also..The screen you pasted is for Send Port... Just wanted to make it clear that i am having issue while receiving message from remote server...

Deepak Sanghi Happy Biztalking.........



------------------------------------
Reply:

Sorry about that... must be time to go home.  I updated the screenshot above.

Are all services and access accounts in the same domain?

Are you using MSMQ 3.0?

Did you review the following article to see if it applies? http://msdn.microsoft.com/en-us/library/windows/desktop/ms699854(v=vs.85).aspx

David Downing... If this answers your question, please Mark as the Answer. If this post is helpful, please vote as helpful.


------------------------------------
Reply:

If this is the Receive Port check theAuthentification settings of the port (not the receive location!!!). Try "No authentification" option.

Try to create a simple .NET client to use this queue. Is it the BizTalk adapter issue or just pure MSMQ issue?

Try to delete and recreate the queue. Try to restrart the MSMQ Service.

Leonid Ganeline [BizTalk MVP] BizTalkien: Naming Conventions for the BizTalk Solutions


------------------------------------
Reply:

Leonid is correct, it might be easier to debug with a simple application.  I cut some code from one of my MSMQ utilities to get you started.

#region Namespaces  using System;  using System.Collections.Generic;  using System.Linq;  using System.Messaging;  using System.Text;
at

No comments:

Post a Comment

Subscribe to: Post Comments (Atom)

Setup is Split Across Multiple CDs

Setup is Split Across Multiple CDs Lately I've seen a bunch of people hitting installation errors that have to do with the fact th...