EMET and Java JRE
I don't have anything to add, but I wanted to start this thread to start to gather experiences of enabling EMET on Java processes.
Not a lot of Google Bing results and I hope this brings some enterprise-specific feedback.
My idea of a party is a virtualization server and a room of TechNet DVDs
- Edited by Daniel Wolf Thursday, May 19, 2011 3:52 PM
Reply:
DEP on Java installer causes it to crash. The .msi installer still works, but you have to get that from a machine that just had it installed.
Therefore, I don't recommend setting DEP as Always On or using Maximum Security Settings. Choosing Application Opt Out works fine.
------------------------------------
Reply:
------------------------------------
Reply:
The security difference between Always on and Opt-out is marginal. I think it's worth the extra compatibility (pretty sure other issues exists)
It has nothing to do with the toolbars, which install fine with Max settings.
------------------------------------
Reply:
I have yet to experience an issue but am using already installed Java enviroments thus far.
I've enabled max system security settings (minus global mandatory ASLR), and tested java at java.com to see if it loaded. So far, so good and no crashes.
I enabled EMET protection on java.exe, javaw.exe, and javaws.exe.
------------------------------------
Reply:
My idea of a party is a virtualization server and a room of TechNet DVDs
------------------------------------
Reply:
https://www.owasp.org/images/0/01/OWASL_IL_2010_Jan_-_Moshe_Ben_Abu_-_Advanced_Heapspray.pdf
Read the above link for information on how EMET can assist against these attacks.
The EMET Heap Spray protection is not full proof and will get updated as time goes on, but it should help guard against a large amount of known attacks and reduces the attack surface.
As new methods evolve, so will the protection.
At the end of the day, it's better to have some than no protection.
------------------------------------
Reply:
------------------------------------
Reply:
- Edited by Mahler9 Wednesday, December 12, 2012 6:52 PM
------------------------------------
Custom sign in page for windows authentication
Hi
I need to have my own custom login page for Windows authentication in sharePoint 2010.
I have searched on net , but I could find only Form Based Authentication.
Could you please help me?
Thanks
Azra
With Thanks and Regards, Azra
Reply:
Hi Azra,
as far as I know, windows authentication is not working with any login screen, since both methods, implementing windows authentication (NTLM on the one hand and Kerberos on the other hand) utilize a login page. Windows authentication is performed by the browser on the Client-side and the WebServer (IIS) on the server side. If you try to access a WebSite based on ASP.NET and windows authentication is configured, then your browser and the server exchange data within a challenge-response-mechanism (challenge & response about the password of the user logged in) (NTLM 3-way handshake, Kerberos potentially indefinite, since the requested resource may reside at the end of a chain of servers the may be "looooong").
I hope, I am not wrong, and although I am pretty sure, that there cannot be any login screen for a SharePoint using windows authentication, since windows authentication is an attempt to realize SSO.
Anyway, since I know, that the terminological precision is sometimes poor when it comes to authentication, and since windows authentication as a configuration option for web applications on SharePoint also encompasses a so called "Windows Authentication" that comprises Anonymous Authentication as well as at least Basic and Digest authentication, did you probably mean this type of authentication?
I also searched the web for articles and I found this one, which mostly proves me right. Maybe you can look at this and tell us, if it helped you.
Kind regards!
Peter
------------------------------------
Reply:
This is the Screen which needs to appear When user goes to SharePoint Home Site.
If Form Authentication is Checked it will do FBA Else by default it will be Windows Authentication
How can i do this?
Azra
With Thanks and Regards, Azra
------------------------------------
Reply:
I guess the screen shows the misunderstanding here. Form Authentication (aka Forms based authentication aka FBA) is a mechanism, where an HTML page is utilized to carry the credentials the the web server in order to authenticate her or him. With Windows authentication, no credentials can ever be asked, since any information about credentials are transported over the HTTP headers, no matter which concrete mechanism is chosen and if credentials have to be typed in (i.e. Basic & Digest authentication), the browser automatically renders an input box and there is no chance for you, to customize that windows, generated by your browser (at least I guess and if that's possible, it's a different hack on IE, FF, Chrome, and so on).
Your picture shows, that form authentication is understood as an option to be taken by the user, which simply is not. SharePoint gives you a choice, which mechanism you want to use, but as soon as you choose windows authentication, your browser and the IIS exchange authentication data without taking the user into account and in the end, you are authenticated or not, depending on whether your Windows account is allowed to access the SharePoint or not.
The custom screen you have shown can only be shown in when FBA is configured, since that is the only authentication method, where you have to type in credentials at all.
Imagine this: Logically when you insert your credentials to the two input fields and do not(!) check "Form Authentication", none of your inputs are really used, because when not using FBA, the browser does not send any of your inputs to the server.
Maybe you want to replace the default page, where you are offered to choose the authentication mode? If so, you probably have to replace the aspx on the hive to modify the experience, but the contents on your picture are - and I am sorry to tell you that - not applying to any realistic authentication scenario. Put simple: no Form Authentication = no credentials to be typed in.
Again best regards!
Peter
------------------------------------
Reply:
Thanks Peter
I got it
Regards
Azra
With Thanks and Regards, Azra
------------------------------------
Oracle.DataAccess.Client.dll of 11.1.6.20
- Moved by Reed KimbleMVP Wednesday, December 12, 2012 5:28 PM not a vb question (From:Visual Basic General)
Reply:
If you have a question, please create the thread as a question, not a discussion, and ask the question in detail. Just repeating the title is not helpful.
Also note that 3rd party assemblies are not directly supported here. If you need a reference assembly from Oracle you will have to contact them.
Moving this to off-topic.
Reed Kimble - "When you do things right, people won't be sure you've done anything at all"
------------------------------------
Windows Media Application Error
Faulting application name: wmpnetwk.exe, version: 12.0.7000.7000, time stamp: 0x494333c7
Faulting module name: Indiv01_64.key, version: 11.0.6000.6324, time stamp: 0x47da26c4
Exception code: 0x40000015
Fault offset: 0x00000000001255fe
Faulting process id: 0x654
Faulting application start time: 0x01c98947c7e33f60
Faulting application path: C:\Program Files\Windows Media Player\wmpnetwk.exe
Faulting module path: \\?\C:\ProgramData\Microsoft\Windows\DRM\Cache\Indiv_SID_S-1-5-20\Indiv01_64.key
Report Id: 05a9f960-f53b-11dd-87de-001e8c6d3f20
- Changed type Mark L. Ferguson Sunday, February 15, 2009 4:29 PM
- Changed type Arthur Xie Wednesday, February 25, 2009 9:02 AM
- Changed type Mark L. Ferguson Wednesday, February 25, 2009 4:11 PM
Reply:
------------------------------------
Reply:
Yes. I recently upgraded my CPU from "AMD Athlon64 x2" to "AMD Phenom II x4".
Any ideas??
Thanks in advance!!!!
I've got the exact same error:
Faulting application name: wmpnetwk.exe, version: 12.0.7601.17514, time stamp: 0x4ce7ae7f
Faulting module name: Indiv01_64.key, version: 11.0.6000.6324, time stamp: 0x47e39416
Exception code: 0x40000015
Fault offset: 0x00000000001220a8
Faulting process id: 0x10f0
Faulting application start time: 0x01cdd7e6b8250f59
Faulting application path: C:\Program Files\Windows Media Player\wmpnetwk.exe
Faulting module path: \\?\C:\ProgramData\Microsoft\Windows\DRM\Cache\Indiv_SID_S-1-5-20\Indiv01_64.key
Report Id: f5ec36bc-43d9-11e2-aa35-005056c00008
------------------------------------
Reply:
Such errors can usually be fixed by upgrading the DRM system. Make sure that neither WMP or Media Center are running, and then start Internet Explorer as administrator (right-click - Run as administrator). In IE, make sure that Protected Mode is turned off, and go to
http://drmlicense.one.microsoft.com/Indivsite/en/indivit.asp
There, click the Upgrade button and follow the instructions. Does that help?
Tim De Baets
http://www.bm-productions.tk
------------------------------------
what is the Active/Passive DAG on exchange 2010
Reply:
Hi,
There is no such thing as an active/passive DAG in Exchange.
What exactly is it you want to know?
Leif
------------------------------------
Reply:
------------------------------------
Reply:
Hi,
You can have several mailbox databases in a DAG - these databases can be active on either one of the mailbox servers (and yoyu can have active databases on both servers).
Leif
------------------------------------
Reply:
Your backup guys is thinking about what servers may hold the active copies of a given database.
What they normally do is to point the backup policy to a single name. This is the DAG network name e.g. dag-01.contoso.com
The backup software is then able to determine the DB layout and will proceed accordingly. Exchange itself does not use the DAG network name, and unless you have monitoring this is how some people find out that it is offline - the backup fails because the backup cannot get to the name.
Cheers,
Rhoderick
Microsoft Premier Field Engineer, Exchange
Blog:
http://blogs.technet.com/rmilne Twitter: 
LinkedIn: 
Facebook: 
Note: My posts are provided "AS IS" without warranty of any kind, either expressed or implied, including but not limited to the implied warranties of merchantability and/or fitness for a particular purpose.
------------------------------------
Reply:
As mentioned above i believe that the person that you were speaking to was referring to the active Server/Database. In a D.A.G. your active database is written to and the log files are replicated to the passive DB's where they are applied bringing those DB's current. Backup exec backs up the the DAG by default it backs up a passive database but this can be changed. Below is a link that might better explain what a DAG is and how it works.
http://www.exchange-genie.com/2009/04/database-availability-group-dag-exchange-2010/
------------------------------------
MVVM and ADO.NET Entity Data Model
Hello everybody,
I've been reading and researching about WPF and MVVM applications that use the interfaces INotifyPropertyChanged,
but as soon I start on this (I come from Windows Forms) I have a lot of confusion.
Any questions:
- In MVVM Pattern is necessary to add an ADO.NET Entity Data Model to the project?
- And if my DB is MySql and I have many tables (about 40), add the application will become slow?
- What basic elements should have a minimum of Inventory Management application, for example (with MySql DB)?
- But you have a simple application that handles data with some related tables that can be lowered to study?
For now I want to dispel those doubts.
We appreciate your feedback greatly.
Greetings, Solph.
Saludos, Solph.
Reply:
Dale A. Howard [MVP]
VP of Educational Services
msProjectExperts
http://www.msprojectexperts.com
http://www.projectserverexperts.com
"We write the books on Project Server"
------------------------------------
Reply:
Oh, excuse me Mr. Howard,
I got confused. Because I am new to the forum.
Thanks
Saludos, Solph.
------------------------------------
PROBLEM: slow down e-mail messages with preview on.
Scenario: Outlook 2010 professional (Volume License or OEM) installed at our customers where they are configured as one or more accounts with pop3 mail store of about 4,000 kb activated with message preview.
The problem presents itself in the display of any e-mail message, also in the messages previously downloaded.
Tips?
Reply:
Try to clean boot your OS- Windows: http://support.microsoft.com/kb/929135
And then launch Outlook in safe mode: http://www.msoutlook.info/question/270
If the issue still persists, you need to check the data file is OK: http://support.microsoft.com/kb/272227
Feel free to post back. Thanks.
Tony Chen
TechNet Community Support
------------------------------------
Reply:
I'll try with your suggests.
Thks a lot.
------------------------------------
Create folder on local machine drive through Timer Job.
Dear All,
How to create folder on local machine drive through Timer Job?
Thanks and Regards
Harish Patil
Reply:
Following code will require to create folder.
http://msdn.microsoft.com/en-us/library/vstudio/as2f1fez.aspx
Following is the link to create Timer Job
http://www.codeproject.com/Articles/403323/SharePoint-2010-Create-Custom-Timer-Jobs
Write down the folder creating code in the timer job Execute method.
Please mark answer , if you think answer is helpful or correct.
------------------------------------
Reply:
Hi Mahindrakar,
Actually First time I have written some code. And I have deploied successfully and It is working fine. I have written for testing purpose.
Now In same I have modified the code just you have given to me.
When I am deployinh therefore also previously code executing not modified.
Why ? Is there any way to clean something ?
Thnks,
Harish
------------------------------------
Reply:
I understand your issue, If you have created the Job then restart the Timer job from services,
Sharepoint cache it, you need to restart the Timer job everytime whenever you made any changes in the code.
Please mark answer , if you think answer is helpful or correct.
------------------------------------
Reply:
Hi,
Thnks for the reply. I have restarted the service (SharePoint 2010 Timer) from the services.
Now even my timer job not working. I am putting the debuger it's not coming upto breakpoint. Previously it was working.
Should I start anyother services ?
Thnks,
Harish
------------------------------------
Reply:
Please mark answer , if you think answer is helpful or correct.
------------------------------------
Reply:
Hi Mahindrakar,
Thnks. I resolve my issue.
I am not getting "Mark As Answer" option so I given a Vote.
Thnks,
Harish
------------------------------------
All SharePoint List Views got corrupted
Hi
I am using SharePoint 2010. Yesterday, our network team took backup of whole site collection in production server and restored at staging server. But today I found that one of the lists stopped working. It contains 3 lookup columns and I also created a webpart from this list that I displayed on root site (Exported to Site Gallery).
I am not able to see the contents of the list in any view, but dispForm & editForm are working correctly (checked from designer).
This list contains 100 records in Arabic language that I cannot write. But I can see the contents of the list in the webpart that I created for root site.
Is there any way, I can get my list back?
I found the following error in logs
System.NullReferenceException: Object reference not set to an instance of an object.
at Microsoft.Office.RecordsManagement.RecordsRepository.Records.GetCachedAllowManualRecordDeclarationSetting(CachedList list, Hashtable siteProperties)
at Microsoft.Office.RecordsManagement.Controls.DeclareRecordAction.<>c__DisplayClass1.<GetDeclareRecordInfo>b__0()
at Microsoft.Office.Server.Utilities.MonitoredScopeWrapper.RunWithMonitoredScope(Action code)
at Microsoft.Office.RecordsManagement.Controls.DeclareRecordAction.GetDeclareRecordInfo()
at Microsoft.Office.RecordsManagement.Controls.InPlaceRecordsRibbon.Page_PreRenderComplete(Object sender, EventArgs e)
at System.EventHandler.Invoke(Object sender, EventArgs e)
at System.Web.UI.Page.OnPreRenderComplete(EventArgs e)
Thanks
Amit Paul Singh
Reply:
Hi Amit,
When you do backup and restore it changes the GUID of the site colletcion.
And the Look up coulmn has two important properties. In one property(propbabaly SiteId) it saves the GUID of site .
Now in your case backup and restoration is happened, it means the Lookup coloumn has wrong Site ID.
I dont think this is related to list forms. In past i have faced same issue. so i wrote one utility to assign the correct GUID to the property of Lookup columns. Also check the GUID'd of master lists.
Hope this will help you.
Regards,
Rahul Shinde
------------------------------------
How to Mount a Mailbox Database from an old Exchange 2007 server to a New Exchange 2007 Server, Old Server is no more available in a network.
Hi,
We have just migrated on a New Exchange 2007 Server from a same 2007 Server, All mailboxes migration is done and working fine. Old exchange is disconnected from a network even a server hardware is dismounted.
Problem here is that I came to know a Month after a Migration that there was one database left on an old server which were used to archive emails globally through journaling.
Now to make it short, I have got a backup (archive3.edb) file on an external drive, I have got the same user archive3 still available in my AD.
Question is that how can I Mount Archive3.edb on my new exchange 2007 server and then to bind a same user mailbox to this particular database so to have access to all the archive emails in that database.
- Moved by Andy DavidMVP Tuesday, December 11, 2012 4:16 PM (From:Exchange Server 2013 - Administration, Monitoring, and Performance)
Reply:
I would look at database portability:
http://technet.microsoft.com/en-us/library/aa998340(v=exchg.80).aspx
How to Restore a Mailbox Database to a New Server with Database Portability------------------------------------
Reply:
I Agree to Andy. we can use the Database portability.
But on the link which andy suggested on the 6th step we have the details below:
Get-Mailbox -Database <SourceDatabase> |where {$_.ObjectClass -NotMatch '(SystemAttendantMailbox|ExOleDbSystemMailbox)'}| Move-Mailbox -ConfigurationOnly -TargetDatabase <TargetDatabase>
=> Above is only possille when you have the old Server Object\Old database on the ADSIEDIT.
=> In case if we don't have any one of those mentioned above, then the only way to resolve the issue is to Restore the backup, associate the old Edb file to new DB, remove exchange attributes to the user and reconnect the disconnected mailbox to the same user as old which will be shown up under the disconnected mailboxes.
M.P.K ~ ( Exchange | 2003/2007/2010/E15(2013)) ~~ Please remember to click "Vote As Helpful" if it really helps and "Mark as Answer" if it answers your question, "Unmark as Answer" if a marked post does not actually answer your question. ~~ This Information is provided is "AS IS" and confers NO Rights!!
------------------------------------
Reply:
Unfortunately, I don't have a Managed Backup but a Manually taken backup of the database with catalogData on an external usb drive.
I don't either have an Old Server functioning, It is already decommissioned.
I had this database Migrated and Mounted from an Old Server to the New Server earlier during an overall Migration process and is Mounted at the moment which is of 125 GB in size which means it contains data but I may had forgotten to migrate a User Mailbox attached to this database which is a reason I am not able to access those mails.
I tried to add that Mailbox as an existing Mailbox through AD but still When I access a Mailbox, I don't see any emails in it. It is empty.
In my understanding It is a matter of linking a Mailbox to the Database.
------------------------------------
Reply:
Did you get an opportunity to refer to the info on the link http://technet.microsoft.com/en-us/library/aa998340(v=exchg.80).aspx pasted by Andy ?
1. can you run Get-Mailbox "Mailbox In Question" | fl Name,Database,Server and check which database is it now connected to?
2. Did you provision new mailbox for the existing user (or) did you reconnect the disconnected mailbox after the old EDB File was associated to a New DB? Please explain about the process you followed for provisioning mailbox for the existing user coz this is really important.
Your understand is correct and It is a matter of linking a Mailbox to the Database.
M.P.K ~ ( Exchange | 2003/2007/2010/E15(2013)) ~~ Please remember to click "Vote As Helpful" if it really helps and "Mark as Answer" if it answers your question, "Unmark as Answer" if a marked post does not actually answer your question. ~~ This Information is provided is "AS IS" and confers NO Rights!!
------------------------------------
i want the logon screen when I use control/alt/delete
- Changed type Cloud_TS Tuesday, December 18, 2012 2:04 AM duplicated
Reply:
Hi,
You have already posted the same issue. Please avoid cross posting, let's focus on:
Thanks.
Tracy Cai
TechNet Community Support
------------------------------------
VPN forever :(
After testing Microsoft Network Monitor 3.4 my VPN (cisco and Microsoft pptp) stoped working.
The problem persisted after uninstalling MS network monitor.
Both vpns seems "connected" but area in vpns was unreachable.
There are many similar vpn problem threads in this forum....
Jiri Cvrk /W8nd8ws 8
Reply:
Bob Lin, MVP, MCSE & CNE Networking, Internet, Routing, VPN Troubleshooting on
How to Setup Windows, Network, VPN & Remote Access on------------------------------------
Reply:
Sorry, I used restore point (I needed to use VPN connections) and made no other research.
Jiri Cvrk /W8nd8ws 8
------------------------------------
Reply:
after two days problem again. NO CHANGES TO VPN (PPTP) CONFIGURATION. VPN CONFIGURATION CORRECT.
But .. error 720 !!
Microsoft Network Monitor 3.4 surely corrupts windows 8 network even though is not installed now!
I can work, I returned to restore point I stored, but after some restart vpn is not functioning. It is not a solution. Please, how can I check network configuration to resolve what is waiting there for occassion to corrupt it?
Jiri Cvrk /W8nd8ws 8
- Edited by JiriCvrk Saturday, December 8, 2012 8:19 AM
------------------------------------
Reply:
Jiri Cvrk /W8nd8ws 8
------------------------------------
Reply:
As we know multihomed computer can cause similar issue. Do you have two or more NICs in the VPN Server?
Bob Lin, MVP, MCSE & CNE Networking, Internet, Routing, VPN Troubleshooting on
How to Setup Windows, Network, VPN & Remote Access onhttp://www.howtonetworking.com
- Edited by chicagotech Wednesday, December 26, 2012 5:43 PM
------------------------------------
Reply:
Thank You! No, there is only one NIC in both servers, I use for VPN access.
But .... I have Hyper V in my installation, with switch one external and one internal connection.
Thanks god, due to use my W7 installation running under hyper V I can connect from VM.
Attempt to reinstall hyper V switch is very short way to VPN malfunction.
Only return to situation before MS network monitor helps. But after some restarts ... I have problem again and again.
I had reinstalled Windows 8 one time because of VPNs problem.
The problen in my first installation was caused by Kaspersky http://forum.kaspersky.com/lofiversion/index.php/t246334.html
after uninstallation Kaspersky changes to network configuration and driver remained active :( (I solved it temporarily by completely clean install of W8).
The second VPN malfunction is caused by previous Microsoft network monitor. And again:
seems that after uninstallation Microsoft network monitor changes to network configuration and driver remained active :(. But with my "expert" skills I cannot find it :D.
I don´t want to reinstall it second time, not sure what happens. So I am using restore point for "repair".
Jiri Cvrk /W8nd8ws 8
------------------------------------
Reply:
Today´s News: My windows 8 network is DEAD.
But I can browse from my HyperV Windows 7 installation (installed under this Windows 8).
Its very difficult to express how much I love my Windows 8.
Jiri Cvrk, proud Windows M8nkey Edition user
------------------------------------
reqiure help regarding compatibility isssue....
Hi friends i try to install age of empire II - age of king on my system. ( windows 7 ) .. it installed successfully...
but when i am running the game... its shows the error
" Could not initialize the graphic system. make sure your video card and driver are compatible with DirectDraw "
please help in this......
Reply:
Hi,
Please refer Similar Thread for reference
I suggest you ask this question in the Microsoft Game Forum for further discussion.
The reason why we recommend posting appropriately is you will get the most qualified pool of respondents, and other partners who read the forums regularly can either share their knowledge or learn from your interaction with us. Thank you for your understanding.
Hope your issue resolved soon.
Thanks & Best Regards,
Mohammed Imtiyaz Ali
- Edited by Mohammed imtiyaz Ali Tuesday, December 11, 2012 8:44 AM
------------------------------------
Reply:
Hi,
See this post:
Hope it helps.
Tracy Cai
TechNet Community Support
- Edited by tracycai Wednesday, December 12, 2012 7:32 AM
------------------------------------
Centralized Logging Service (CLS) , ocslogger and Snooper Tools
Please give me an idea about
::::
Centralized Logging Service (CLS) , ocslogger and Snooper Tools
How this tools work on lync 2013 enterprise editions.
How its help a Lync Server admins.
- Changed type lyncstudent Wednesday, December 12, 2012 7:04 AM
- Changed type lyncstudent Tuesday, December 25, 2012 7:19 AM
- Changed type lyncstudent Tuesday, December 25, 2012 7:19 AM na
Reply:
------------------------------------
Application poll keep recyleing frequntly
In my site Application Pool Recycle frequently ..i checked pool recycle time i.e 1740(minuts) and all other settings.so PId of Application Pool Keep Changing...
Any Sugeestion ,.....
harsh
Is it Possible to Pause a OOBE -windows-shell-setup_neutral FirstLogonCommand Synhcronous Command in Unattend.xml for User Input to Join Computer to Domain?
Is it possible to pause for a long period of time a OOBE -windows-shell-setup_neutral FirstLogonCommand SynhcronousCommand before the next one executes? I have a join domain script that prompts for the OU but the next command runs and reboots the system before the user can input the information. Has anyone tried this?
or Can I have sysprep unattend.xml process prompt for Input when joining the domain so an AD OU can be entered then move on to build the windows 7 box?
Has anyone tried this and been successfull???? I am searching without too much success. Any help would be appreciated very much.
gary pearson
Reply:
Hi,
I haven't hear it could pause for a long period of time when performing this part. Also, regarding the prompting for Input issue, I notice you have posted a similar issue before.
In the unattend.xml for Windows 7 Deployments -Can Computer Description Prompt for Input in the sysprep post process??
More reference:
FirstLogonCommands
http://technet.microsoft.com/en-us/library/ff715886.aspx
SynchronousCommand
http://technet.microsoft.com/en-us/library/ff715408.aspx
Regards,
Vincent Wang
TechNet Community Support
------------------------------------
POSOlSoft.Azure.ServiceManagement library, version 2.2.0
POSOlSoft.Azure.ServiceManagement library, version 2.2.0
http://www.posolsoft.com/products/ServiceManagement.htm
Windows Azure Managed Library (http://msdn.microsoft.com/en-us/library/windowsazure/dd179380) does not contain API for Windows Azure Service Management (WASM).
POSOlSoft.Azure.ServiceManagement library implements .NET wrapper for Windows Azure Service Management REST API (http://msdn.microsoft.com/en-us/library/windowsazure/ee460799) except the Virtual Machines and Virtual Networks operations.
Main entry point static classes of the library are:
OperationsApi - its methods return HttpWebResponse instances intended for further processing;
Operations - its methods return instances of WASMResponse.Base-derived classes containing properties corresponding to the XML elements of the WASM HTTP responses;
OperationsExtra - its methods implement compound operations and return instances of WASMResponse.Base class.
All available classes and their members are described in the included help file.
POSOlSoft.Azure.ServiceManagement library requires at least .NET 4 Client Profile and is free.
Oleg Subachev
support@posolsoft.com
posolsoft@outlook.com
Oleg Subachev
Reply:
Stackify
------------------------------------
How do I fix "autochk program not found - skipping AUTOCHECK"
I installed Windows 8 Pro x64 (W8) in a dual boot environment with my already installed Windows 7 Ultimate x64 (W7) and everything worked fine until I realized I had made the first partition (W8) too small. I used the Windows tool to shrink the second partition (W7) and then used "Partition Wizard" to move the W7 install back and then add the unallocated space to extend the W8 partition. Now when I start the machine it goes to the boot menu and will go into W8 with no problem, but if I try to start W7 there is a restart and then it goes to the W7 screen that says "Microsoft Corporation" with the moving bar, next comes the "autochk program not found - skipping AUTOCHECK" at which point the computer restarts and then shows the "Start Windows Repair" or "Start Windows Normally" screen. Starting Windows normally just loops back to the option screen. Running the repair program results in problems being found and allegedly repaired, then I'm told that Windows will finish repairs upon reboot. However, upon reboot I come again to the boot menu, select W7 and again the missing "autochk" message. When I try to run sfc.exe I am always told that there is a pending repair and that sfc.exe can't run, this even happens after a repair has finished or I haven't run a repair at all. Therefore, if the autochk.exe file is corrupted I don't seem to have a way to replace it.
Originally I thought this was a boot issue, but it is clear that the machine is trying to boot into W7 but is stopped by the "not found" program. From the W8 desktop I can access the W7 partition and autochk.exe is where it should be, but whether it is corrupt or not I don't know, because I am unable to run sfc.exe to see.
I attempted to take ownership of the autochk.exe file from W8 and I can obtain ownership, but not change the permissions in order to replace it. And as I can't get W7 to start no matter what I've tried, it isn't possible to work from within W7. I have also read that the "hash" file in the registry that is used to compare the autochk.exe file could be corrupt, in which case no autochk.exe replacement would work.
I am at a total loss and standstill until this is resolved. I have read literally dozens of posts on a number of different forums and my problem is similar to, but not resolved by any of the answers given in any of the posts (except possibly the hotfix I downloaded from Microsoft, but since I can't get W7 started, I can't tell if it would work - KB975778).
Reply:
Hi,
Please try the steps the article below and see how it works.
How to use the Bootrec.exe tool in the Windows Recovery Environment to troubleshoot and repair startup issues in Windows
http://support.microsoft.com/kb/927392
Hope it helps.
Tracy Cai
TechNet Community Support
------------------------------------
Reply:
"Originally I thought this was a boot issue, but it is clear that the machine is trying to boot into W7 but is stopped by the "not found" program. From the W8 desktop I can access the W7 partition and autochk.exe is where it should be, but whether it is corrupt or not I don't know, because I am unable to run sfc.exe to see."
Tracy,
Thanks for your reply. I should have added to the above that at the time I thought it to be a boot issue I tried all the remedies with Bootrec.exe and also installed EZ-BCD and when these steps failed to rectify the problem, I realized that the problem occurredonly after Windows 7 began to start.
In any case, I have been going around and around with this for several days and so I recently became so frustrated that I decided to reinstall Windows 7 over the pevious install, so the startup problem is moot. After reading a very large number of forums on the subject of the "autochk program not found...", I came to the conclusion that the most likely cause was that the registry key that verifies that autochk.exe is not corrupt was itself corrupt and apparently there is no way to correct the key.
However, this does bring up a collateral issue. I thought that it might be possible to get W7 to start if I made it the defaul OS, but when I did so the boot menu changed to the Windows 7 Boot Menu and I can find no way (short of reinstalling W8 and I've had my fill of reinstalling OSes for this month) to reinitialize the Windows 8 Boot Menu. No matter how I set the OSes to boot or from which OS I recreate the BCD, it always uses the W7 Boot Menu. Therefore, can you (or anyone) explain to me, if it is in deed possible, how to get the W8 Boot Menu back?
Thanks again for your assistance.
------------------------------------
BP Holdings | Richard Whitehead - vient du champ
BP appuie six athletes britanniques et beaucoup d'autres sportifs internationaux et les femmes, afin de se préparer pour le 2012 Londres et Jeux olympiques paralympiques. "Vient" l'heure, l'homme est vient tatoué sur le bras de 35 ans athlète, paralympique et 'blade-runner' Richard Whitehead, dont le temps de nouveau viendra cet été, le Lorsque détenteur you record du monde à des événements marathon s'attaque très différents - les 100, 200 et 4 x 100 m relay.
Cette athlète de haut level, qui est née sans jambes au-dessus du genou - connu comme un double amputé congénital - parle BP Magazine conquérir un nouvel événement, contester les perceptions modifiant et le règlement relatif au négoce.
Sur le marathon de New York de 2004 en cours d'exécution n'ayant aucune expérience ...
"Certaines personnes que pensaient j'étais fou. Mes parents étaient inquiets. Je ne pas comment savais j'allais encore y arriver. corn à la fin des années 1980, j'ai été par inspiré canadien Terry Fox. Il perdit une jambe au cancer tandis que et beaucoup de gens à l'Hôpital ont été négatifs, il a glass case qu'en Étant positif, que vous pouvez réussir. Il a tente de lancer partout au Canada et al entrepris lancer de tous les jours 42 kilomètres. Malheureusement, il est mort avant qu'il atteint la fin de son périple. Il cultiva que dans ma tête graine -. qu'un jour Depending n'accepterais un de ces Défis qui semble là-haut dans les nuages "
Richard a Lutte avec la formation, avant il avait prothèses de marche, il a couru sur ses genoux à l'aide en cours d'exécution of tasses. "Depending courais tard dans la nuit à cause des du public perceptions. corn j'ai tout de même que cela décidé Allait changer ma vie et avoir un impact sur les gens qui me voient courir. Depending voulais montrer à tous que vous pouvez réussir et prendre of réalisables mesures pour atteindre cet objectif dans le ciel. "
En 2004, a Richard terminé le marathon en cinq heures et 30 minutes. Depuis lors, Richard couru a 25 marathons et en 2009, est la devenu premier amputé jamais deux pattes terminer pour le marathon de moins de trois heures.
Sur la gestion de la technology ...
"Le meilleur que je kit recommanderais coureur pour tout est une montre GPS. Il m'a aidé et est quelque chose que je recommande à tout le monde. C'est l'me dit que autoévaluation et si je suis sur le cours de mes objectifs. Tout le monde demande que si vous les prothèses donnent un avantage il n'y a aucun avantage. ils ne sont pas élastiques ils sont faits de fiber de carbone, c'est une résine utilisée pour ailes d'avion-.. . Il n'y a aucun ou quoi que ce soit propulseurs qu'ils répliqueront comme les ischio-jambiers qui se trouve dans la jambe qui les forces. obtenez vous de vos jambes. assouplit l'action of the ischio-les Répliques jambiers. "
Sur l'évolution of événements ...
Richard voulait participer aux jeux de 2012 de Londres, mais il n'y a aucun cas de marathon pour les deux amputés of jambes et le Comité International paralympique (CIP), a statue qu'il ne pas pouvait courir amputés contre de bras Donc, il se prépare soutenir à la concurrence dans les 100, 200 et 4 x 100 mètres of événements dans la classification T42, mais le marathon est là que Reside son coeur. "Pour moi, c'est une course inclusive avec les coureurs de toutes les capacités et d'âges concurrence côte à côte.
"Il ya un peu de différence entre 2.26 km et 200 mètres, comme vous pouvez l'imaginer. Je me suis assis avec mon entraîneur, Liz Yelling, qui a dit: "Richard, pensez si vous que vous pouvez faire cela, c ' est parti pour it. " J'aime les gens autour de moi qui ne mettez pas tout de suite of barrières.
D'être une ambassadrice of Athletes BP London 2012 ...
"BP prend en charge mon voyage et il est important d'avoir cette relation et la plate-forme de prendre et de s'engager avec le public. J'ai été très désireux dans la société de s'impliquer dès le début et fier de le representer. Part à Londres en 2012, j'espère que je ne peux que le succès. "
«Après m'a dit que je ne pas en mesure de serais rivaliser dans le marathon de Londres 2012, je me suis qualifié Championnats du monde pour les IPC en Nouvelle-Zélande où, en 2011, je suis ail expérience avec aucune réelle".
Malgré cela, Richard remporté a un record de championnat et la médaille d'or et al Continue à battre of records du monde et de 200 mètres 400 mètres.
Mais il n'a pas le marathon de oublié. "Je veux all aux Jeux paralympiques et je tiens à la prochaine génération d'soutenir Athletes. je ne peux pas dans le rivaliser marathon, mais que ma j'espère performance en 2012, depending peux changer cette décision. je ne vais pas prendre s'asseoir et pas de réponse, "En attendant." J'ai l'intention d'écraser les 200 mètres. "
Capacité ...
"Personnes ayant une déficience ne pas avec viennent bagages, ils viennent avec l'expérience. Je suis un athlète handicapé, mais je me vois comme une personne qui veut plus haut à effectuer level possible, surmonter quoi que dans les obstacles summarize each. »
"Mes parents étaient of arrivistes et m'a impliqué s gymnastique jeune gymnastique regroupe toutes les principales compétences impliquées dans le sport. Équilibre, agilité et coordination, ils pensaient que le sport était importants et m'a présenté à différents environnements. Gymnastique pas juste des personnes handicapées. J'ai eu of difficultés à surmonter et même si j'ai eu un soutien considérable, j'ai réalisé rapidement seule personne qui que la Allait me faire par le biais de ces Défis était moi. "
- Changed type deborahbisch Wednesday, December 12, 2012 3:28 AM
- Changed type deborahbisch Wednesday, December 12, 2012 3:29 AM
Reply:
------------------------------------
Exchange Server 2010 SP2 Rollup 5 released
On 11/13/2012 Microsoft released Rollup 5 for Exchange Server 2010 SP2
After you install this Rollup 5 you will update Exchange Server 2010 SP2 version number to 14.2.328.5
more information:
Exchange Server 2010 Service Pack 2 Rollup 5 (KB2719800)
you can download update from
Update Rollup 5 for Exchange Server 2010 Service Pack 2 (KB2719800)
Remigiusz
ExchangeBlog
- Changed type Remigiusz_Sz Wednesday, November 14, 2012 9:15 AM
Reply:
------------------------------------
Reply:
------------------------------------
Reply:
Don't install it, it is bugged.
If it's just me then good enough. But after upgrading, I had bunch of issues and could no longer use the Get-DatabaseAvailabilityGroup -Status cmdlet and the MSExchangeADTopology service started acting strangely.
Looks like a .Net type/assembly wasn't upgraded correctly or not even included in the MSP.
I've put an alert on my blog, it's in French, but please test and relay if yo uhave the same behavior.
http://unifiees.blogspot.fr/2012/11/alerte-exchange-server-2010-sp2-rollup-5.html
Thanks,
Benoit.
Benoit Boudeville - Avanade France & Belux Microsoft Certified Master - Office Communications Server 2007/R2 http://unifiees.blogspot.com
------------------------------------
Reply:
------------------------------------
Reply:
Was SP2 RU5 upgraded from SP2 RU4 , SP2RU4v2 or something else?
------------------------------------
Reply:
Microsoft is aware of a DAG related bug in UR5 for Exchange 2010 SP2. Advice is not to install it for the time being, wait for v2 ;)
http://thoughtsofanidlemind.wordpress.com/2012/11/15/analyzing-exchange-2010-sp2-ru5/
Rajith Enchiparambil | http://www.howexchangeworks.com |
------------------------------------
Reply:
Rollup 5 for Exchange 2010 SP2 can no longer be downloaded due to bug that affects DAG's.
Microsoft remove website with download rollup 5
Remigiusz
ExchangeBlog
------------------------------------
Reply:
------------------------------------
Reply:
Hi
you can find here description of problems caused by rollup 5
Exchange 2010 SP2 Error after upgrading to Rollup 5
Remigiusz
ExchangeBlog
------------------------------------
Reply:
Hi
Many thanks for your reply. Perhaps I should have worded my question differently. Does this update make a DAG potentially unstable, could it cause loss of service and will end users be affected in anyway assuming a DAG will be OK and the service stays up? What I am really asking would a installation be at major risk with this installed please?
Many thanks in advance.
------------------------------------
Reply:
SP2 RU5 V2 Relesed:
http://support.microsoft.com/?kbid=2785908------------------------------------
Reply:
------------------------------------
No comments:
Post a Comment