Infopath custom form - conditionally enable Ribbon Button
Hi,
I have created an infopath form which i have published in a forms library such that whenever i try to add a new document, this form opens and take values. There are buttons in the ribbon by default which i can easily remove but there isnt anyway to conditionally enable it. Is there any way that i can make that button only available depending on a certain condition.
Regards,
Nishant
Reply:
Hi,
In the form library, edit the page, add a content editor web part. In the Content editor webpart, put the condition to make the ribbon button enabled..
------------------------------------
How to filter calendar items to this weeks events and should include the recurring events
Hope this will help fellow SharePoint users:
My requirement was to display the leave items for this week (Today to Today+6 Days) and should take care of the recurring events.
I got this working by using the filters as shown in the screen shot below
- Changed type Entan Ming Monday, October 8, 2012 10:02 AM
- Changed type Entan Ming Monday, October 8, 2012 10:02 AM
Reply:
Hi HPurohit,
Thanks for sharing.
Thanks,
Entan Ming
Entan Ming
TechNet Community Support
------------------------------------
make infopath forms for a document library with several content types added to it
hi
i have a document library with several content types added to it.each content type has several site columns added to it.and now i want to know how can i use InfoPath to make forms for this library?
Reply:
#RoHsTr
------------------------------------
retention workflow not getting triggred
Hi All,
I have a scenario described below.
We have created a tool which creates a Publishing Site and a Publishing Subsite within it.
Now we a Content hub in which we have created our own content type(Document) and defined retention policy for that content type.
Now The problem is stated below :
Whenever the retention stage is reached the Workflow (SPD 2010 Workflow)gets started on the Site collection Level but not at the Subsite level.
When we see the Workflow screen the associations are shown but the workflow is never triggered.
Note : We have published the workflow globally.
Any Help would be appreciated.
Reply:
Did you activate the Workflow Feature at the sub site level??
You have to activate the workflow feature at every level where you want to run it.
#RoHsTr
------------------------------------
Infopath Tasks form is not completing the status of the task
We did a database restore of our production envronment into the UAT, There was a workflow working perfectly fine in the Production, However, It has stopped working in the UAT environment. The workflow creates multiple task during the complete process. We can see that the First task is being created, However, When the user tries to complete the task, all the values are getting saved back to the task list but the status of the task is not getting changed to "Completed" The status is still "In Progress" and the workflow is throwing a generic error. "An error has ocuured in the <WORKFLOW NAME>".
This is a Sharepoint Designer workflow.
Reply:
Try opening the workflow in designer from a UAT site and check for the completion condition for the task.
May be some variables get vanished in restoring from Production to UAT.
#RoHsTr
------------------------------------
SP Designer approval workflow No item exists
Hi,
i have approval workflow in sharepoint designer, when user add request its goes to his manager wehn manager logs and click on request it gets following error:
Error
No item exists at http://web/Lists/Vehicle/DispForm.aspx?ID=323. It may have been deleted or renamed by another user.
Web Parts Maintenance Page: If you have permission, you can use this page to temporarily close Web Parts or remove personal settings. For more information, contact your site administrator.
Troubleshoot issues with Microsoft SharePoint Foundation.
Correlation ID: 6b405051-3567-45dd-9cb5-ded05d3ff866
Date and Time: 6/1/2012 12:45:51 PM
Go back to site
i have checked permissions user has read and contribute access on custom list, task list and even item level.
Please tell how to fix it.
iffi
Reply:
Check Advance settings of your Custom List and set Read all items, Edit all item.
Do not put them as for Read only items created by me and edit only edit items created by me only.
#RoHsTr
------------------------------------
Error Closing Browser-Enabled InfoPath in iFrame
We have historically had SharePoint libraries appearing in iFrames on the Dynamics CRM site and have recently tried viewing a Form Library in an iFrame. The browser-enabled form opened in the iFrame operates correctly, but errs when the form tries to close and return to the parent library.
Problems:
- The form does not close after submission or when "Close" button is clicked
- The form does not return to the form library View after closing
- Clicking "Close" again results in a SharePoint dialog displaying ("The form has been closed. Click Start Over … or Click Close…")
- A script errors occurs in the SharePoint "Core.js" file ("Microsoft JScript runtime error: Permission denied" - and other errors I could detail)
Setup:
- InfoPath form hosted in a SharePoint 2010 Form Library, viewed from iFrame on Dynamics CRM 4
- SharePoint & CRM in same domain on our internal network
- iFrame in CRM set to allow cross-domain scripting
Testing Notes:
- Tested viewing form in iFrame on test website for debugging and saw similar behavior (not just a CRM issue)
- Tested framing an InfoPath form hosted in another environment and saw similar behavior (not an environment-specific issue)
- Debugging the Core.js script showed errors on page load and on clicking the "Close" button
- Script functions erring since input value null for both View_CanNavigateToUrl(a) function and GetEventTarget(a) function
- I'm wondering if the script cannot find the parent when in a framed context
Questions:
- Is this a known limitation that an InfoPath form will not behave correctly in an iFrame?
- Is there any scripting changes I can make to the page hosting the iFrame to overcome this?
- Edited by RKElder Monday, July 30, 2012 2:08 PM corrected spelling
Reply:
Hi Elder,
Whenever you open an infopath form in Browser it opens and appends Source Location query string from where it was opened and on closing of this Form this form goes back to Source location.
Now your problem is, since you are showing this form in an iFrame whenever you are closing this form it fetches the current URL fromt the window Url and doesn't found that Source Location query string that's why it is showing you The Form has been closed (which is an expected behaviour).
Now what you can do is by putting some javascript on the page where you are showing your Form in an iFrame is to find the "Close" button and on click of this button change the URL of your iFrame to the Parent URL or URL where you want to go back.
#RoHsTr
------------------------------------
How to set default printer on a Windows 2008 RDS server
- Moved by Simon_WuMicrosoft contingent staff Monday, October 8, 2012 9:16 AM winserver question (From:Admin)
- Changed type Boo_MonstersInc Tuesday, October 16, 2012 8:36 AM
Reply:
I would ask in the Windows Forum
http://social.technet.microsoft.com/Forums/en/category/windowsserver/
------------------------------------
Reply:
Hi
Dut to the issue is not relating to Exchange, I have moved this thread to Windows Server Forum
Cheers
Zi Feng
TechNet Community Support
------------------------------------
Window 7 - Unattend.xml has product key - STILL prompts during OOBE!!?
I have create a Windows 7 Home Premium master image using a the official Microsoft Authorized refurbisher installation disc. I am trying to create the answer file that will contain the product key so that the end user will not have to manually enter it during the OOBE welcome. Using the Windows System Image Manager I created a new answer file from scratch. I've tried three configurations of the answer file:
1st attempt. Adding Microsoft-Windows-Setup\UserData\ProductKey and entering the product key there and setting WillShowUI to 'never'
2nd attempt. Adding Microsoft-Windows-Shell_Setup\ and entering the product key into the 'product key' field
3rd attempt. I had both options 1 & 2 added in the same answer file
Regardless, everything it boots to OOBE I am still prompted for the product key
I've move the Sysrep folder to C:\sysrep and place the unattend.xml file into this folder.
I'm am running sysrep with from the command prompt with this:
C:\sysprep\sysprep /oobe /shutdown /unattend:C:\sysprep\unattend.xml
Any idea as to why it is still prompting for the product key and or how I can get this to work?
Thanks
Here is my uattend.xml
<?xml version="1.0" encoding="utf-8"?>
<unattend xmlns="urn:schemas-microsoft-com:unattend">
<settings pass="specialize">
<component name="Microsoft-Windows-Shell-Setup" processorArchitecture="x86" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<OEMInformation>
<Manufacturer>Test Company</Manufacturer>
<Model>Test Model</Model>
<SupportHours>Test Hours</SupportHours>
<SupportPhone>1-800-555-5555</SupportPhone>
<SupportURL>www.work.com</SupportURL>
</OEMInformation>
<ProductKey>12345-12345-12345-12345-12345</ProductKey>
</component>
</settings>
<settings pass="windowsPE">
<component name="Microsoft-Windows-Setup" processorArchitecture="x86" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<UserData>
<ProductKey>
<Key>12345-12345-12345-12345-12345</Key>
<WillShowUI>Never</WillShowUI>
</ProductKey>
</UserData>
</component>
</settings>
<cpi:offlineImage cpi:source="wim:c:/documents%20and%20settings/owner/desktop/install.wim#Windows 7 HOMEPREMIUM" xmlns:cpi="urn:schemas-microsoft-com:cpi" />
</unattend>
Reply:
------------------------------------
Reply:
Yes, I confirmed the product key in unattend.xml is correct. Once it boots to the desktop I copied and pasted the key into the Windows Activation to confirm it was correct and it activated successfully.
BTW, we are NOT using a volume license key. Each computer is has its own retail key or register refurbisher key.
- Edited by AdamNYC31 Thursday, October 4, 2012 6:32 PM
------------------------------------
Reply:
Hi,
I suggest changing <WillShowUI>Never</WillShowUI> to <WillShowUI>OnError</WillShowUI> and check if we can receive any error message.
Kim Zhou
TechNet Community Support
------------------------------------
Add document metadata on Content Query Web Part
Hi,
I just wanted to add some document metadata on content query web part I created. The CQWP can display some default columns and I look for additional column to be added.
By the way, can I make CQWP display like List View? I mean display by Column like Standard View
Please advise,
Thank you,
- Edited by NattapongK Monday, August 20, 2012 6:30 AM
Reply:
You can add more columns in CQWP by modifying ItemStyle.xsl which is located at your site collection at the following location: Style Library/XSL Style Sheets/ItemStyle.xsl
Create your new template by copying one of the templates don't modify existing ones and you can add new columns as many as you want here.
#RoHsTr
------------------------------------
To hide quick launch and top link bars according to different user with different pernission
I have a sharepoint 2010 application , on the top i have a top link bar with menu items. i dont want to show all menu items to all the users,i would like to show menu items based on the permission levels of the user. is there any way to restrict/hide the menu items for readonly users??
Loganathan S
Reply:
You can create Navigations and under the Audience section you can specify the Users/Groups to whom this navigation should be visible.
#RoHsTr
- Edited by RoHsTrxD Monday, October 8, 2012 8:57 AM
------------------------------------
How to implement a tab control in InfoPath 2010
When we are designing an electronic form, it is always assumed that technically a tabbed user interface can be implemented easily. That is because we see tabbed user interfaces almost everywhere in the software we interact with on a daily basis, we also get used to the convenience of tabs. We kind of take tabbed navigation for granted. For Windows forms applications, there is an out-of-box tab control form Visual Studio .NET. It is the same situation for ASP.NET applications, so it is a drag-and-drop kind of easy operation to have a tabbed navigation in Windows and ASP.NET applications. However, it is not easy in InfoPath because we don’t have an out-of-box tab control provided by InfoPath 2010.
Here are the step by step instructions on how to implement an elegant tabbed navigation interface.
Assume you want to have a tabbed interface with the tabs as Flights, Hotels, Cars and Vacation Packages like below.
Step 1: Open InfoPath 2010 and right click on the “Insert” menu, click on “Custom the Ribbon…” from the popup window.
Step 2: Add Flights, Hotels, Cars and Vacation Packages as custom tabs. You can do so by using the “New Tab” button (not the “New Group” button). Note that, by default, “Insert” will be selected from Main Tabs list, you need to select “Add-Ins” before adding any new tabs. Otherwise, these new tabs will be inserted in the middle as opposed to be appended at the end. Click on the “Okay” button to close off this popup window after all new tabs are created.
Step 3: In InfoPath 2010, click on “Flights” from the menu bar; capture a screen shot of InfoPath and paste it into Windows Paint (for sure you will need to Windows Paint open before this).
Click on “Hotels” from the menu bar; capture a screen shot of InfoPath and paste it into the same Windows Paint from above.
Click on “Cars” from the menu bar; capture a screen shot of InfoPath and paste it into the same Windows Paint from above.
Click on “Vacation Packages” from the menu bar; capture a screen shot of InfoPath and paste it into the same Windows Paint from above.
Please make sure you shift the second, third and fourth screen shots a bit as following so you can always see the menu portion of the first screen shot(s).
Step 4: Select the first “Flights” area like below and copy it to the Windows clipboard (control + c). Make a note of the size of the selection, which you can find out from the status bar of Windows Paint.
Open another Windows Paint and paste this copied selection (see screen shot below). Save this picture as “Flights_Selected.png”.
Select the second “Flights” area and copy it to the clipboard. Make sure the size is exactly the same as the first one.
Open another Windows Paint and paste this copied selection (see screen shot below). Save this picture as “Flights_Default.png”
Step 5: Repeat step 3 for “Cars”, “Hotels” and “Vacation packages”.
Step 6: Use the above pictures and follow the instructions provided by the video at the following link http://blogs.msdn.com/b/infopath/archive/2010/01/07/create-tabbed-navigation-using-picture-button-controls.aspx
At the end, you should see something like this, a very beautiful and elegant tab control in your InfoPath.
To make your tabbed navigation even better, you can create pictures for hover behavior as well. The theory is the same. With the steps described above, you don’t need a professional photo editing tool the pictures you need.
Reply:
Hi,
Good Article. Thanks for sharing
------------------------------------
Access Denied when logged in in FBA application
Hi friends,
I have configured FBA application using this link,
Everything is working fine. Then i wanted to add visual web part above to link bar so i did it using this,
So when i logged in using admin account everything worked fine, but when i logged in with user account which is created using FBA, I got error as 'Error:Access Denied'.
So how can i resolve this issue?
- Edited by satish_p Monday, November 14, 2011 5:47 AM
Reply:
Hi,
Please check this:
1) Login using Admin account and in site permissions, check for the user's permission which you tried to login.
2) Try to access the site with any other user created using FBA
------------------------------------
create workflow to send email to users when an event was approved/rejected in group calendar
Hi ,
I am using group calendar for resources Booking with content Approval(for Approved or Rejected). When an event was approved /rejected i want to send an email to users(Who is requesting the booking) weather their booking was approved or rejected using workflow.
I created a workflow but it sending an email for both the same i mean when i clicked on approve, sending the email same message(Like Your booking was Approved), and if I select rejected also sending the same message(your booking was approved). But i want if approved send mail as approved, if rejected send mail as rejected. Is it possible.
Please Can anybody help me .
Thank you
Reply:
Are you using SPD workflow??
If Yes then you can click on your Approval Task Process and then furthuer go inside your Task Process check the Open single Task behaviour or Overall Task Behaviour link (I am not sure as I dont have Designer to check it) and then inside any of this you will find all information and mail formats you can change any of the mail formats there Save the workflow, Publish it and you are done.
#RoHsTr
------------------------------------
Rely on global conditions for software dist?
We want to deploy a number of applications depending of user/computer group membership.
Our plan:
- Loginscript popluate two reg-keys with name of groups (in hklm & hkcu)
- ConfigMgr picks up those keys a global conditions
- Two collection, one for "all" users and one for computers (just some basic filtering on those collections)
- Deploy all applications to the collections with (at least) a condition "If my global condition contains GroupNameX"
Thoughts and/or suggestions?
Why?
We want to minimize the number of collections and have fast deployment of applications. In our case, just run the loginscript again and you have the app...
I know that global conditions are evaluated every 7 days (or is it 5?), but that's easy to fix so it's done right after the loginscript.
- Moved by Joyce Wang [MSFT]Microsoft employee Wednesday, October 10, 2012 3:54 AM (From:Configuration Manager 2012 - General)
Reply:
Torsten Meringer | http://www.mssccmfaq.de
------------------------------------
Reply:
Will try do a diff of the group-list and only trigger the agent if there is a change, that should reduce the load...
------------------------------------
Reply:
A couple of downsides:
- app deployment reports have very large percentage of "requirements not met" users/computers
- all users & computers need to evaluate a large number of "useless" policies --> possible performance issues (like Torsten said)
Panu
- Edited by Panu SaukkoMVP Sunday, October 7, 2012 4:14 PM
------------------------------------
Reply:
- all users & computers need to evaluate a large number of "useless" policies --> possible performance issues (like Torsten said)
Is this done on the client or on the MP ?
------------------------------------
Reply:
Torsten Meringer | http://www.mssccmfaq.de
------------------------------------
Reply:
For the interessted... here are some snippets of code:
http://www.snowland.se/2012/10/08/keep-a-list-of-usercomputer-groups-in-registry/
- Edited by Rikard Ronnkvist Monday, October 8, 2012 7:31 AM
------------------------------------
How to Setup Windows Server 2012 Direct Access with Basic PKI Configuration and Windows 7 Clients
I have Created Detail Videos and want to share on How to Install Windows Server 2012 Direct Access with Single Network Card Configuration and windows 8 Clients
http://www.youtube.com/watch?v=CNJOziif03k
And Windows Server 2012 Direct Access with Basic PKI Configuration and Windows 7 Clients
http://www.youtube.com/watch?v=_jgamV0XDiM
Hope this will help
If you like these video please subscribe, like, and Share
Direct Access Windows 2012 (without UAG) - Not working completely.
I have a LAB Setup to test DA (2 NICS) on Windows 2012. (This is without UAG etc). Everything is virtualized using HyperV
Auto Enrollment is done and working.
1. Domain Controller, DNS, DHCP, CA - Single NIC - DC1.dom.local
2. Web Server - Single NIC - Web1.dom.local
3. DA Server 2012 - 2 NICS - One connected to the Internal Network and other to Internet (external - not real internet). - DA.dom.local
4. Public DNS - 1 NIC - Connected to the Internet - It is in the same subnet as the External NIC of the DA server - DNS01 (Workgroup)
5. Windows 7 Client - Has received all the certificates and the DA client policy. Now connected to the public Network, where it can connect to public DNS - DNS01 and DA Server external NIC.
PUBLIC DA NAME = DA.Contoso.com - I have a entry in public DNS to resolve this to external NIC of the DA server. CRL is disabled.
Now, when my client is outside the local network. I can ping all internal machines fine - DC, DNS, Webserver, DA server. So my infrastructure tunnel is fine. However I cannot connect to the webserver or any shares. Not sure why.
One thing I noticed - When I run netsh name show policy - the Certification Authority is BLANK.
DCA 2.0 - shows that the client is not connected the internet - user action. But when outside the network, as I said - I can ping everything but not access any resources.
Regards, Vik Singh "If this thread answered your question, please click on "Mark as Answer"
Reply:
Is the client able to access the CRL for the internal cert? I am assuming that you are using your own certificates in this lab.
Hth, Anders Janson Enfo Zipper
------------------------------------
Reply:
CRL check has been disabled, as this is LAB environment only.
Regards, Vik Singh "If this thread answered your question, please click on "Mark as Answer"
------------------------------------
Reply:
Sorry 'bout that.... I missed that in your original post.
Is this an IPv4 environment on the internal network? If so you need to enable inbound ICMPv4 Echo Requests on internal resources in order for Teredo to work. Easiest way to do this is to add this to a GPO. As this is a lab, you can add it to the Default Domain policy or for that matter create your own....
Hth, Anders Janson Enfo Zipper
------------------------------------
Reply:
Regards, Vik Singh "If this thread answered your question, please click on "Mark as Answer"
------------------------------------
Reply:
It it tries to connect to teredo.ipv6.microsoft.com, then I would say that your clients are not correctly configured. Your clients teredo configuration should point to your-da-server.yourdomain.tld (e.g. da.contoso.com).
Do they get the correct GPO for client settings? Is the client computer account in the correct group in order to get the GPO?
You can confirm your settings with the command:
netsh interface teredo show state
(from a command/ps prompt)
Hth, Anders Janson Enfo Zipper
------------------------------------
Reply:
I got this working in this way.
I eventually installed another server - TMG 2010. Changed DA to a single NIC. Server Published (HTTPS) the DA server in TMG.
Regards, Vik Singh "If this thread answered your question, please click on "Mark as Answer"
------------------------------------
Reply:
I have everything in LAB and it works very good, even in NLB mode.
Only thing that does not work, for me, is RDP from internal servers to DA external clients.
------------------------------------
Reply:
Vuk,
Have you verified the following:
- does the client, when on the outside, register in DNS with its external IP?
- have you created the necessary inbound rules on the client that allows traffic to the client (incl enabling edge traversal)?
For reference on how to configure manage-out, see:
http://technet.microsoft.com/en-us/library/jj574200.aspx
Hth, Anders Janson Enfo Zipper
------------------------------------
Reply:
The issue is resolved as mentioned earlier.
I installed TMG and server published the DA server (single NIC)
Regards, Vik Singh "If this thread answered your question, please click on "Mark as Answer"
- Edited by Vik Singh Wednesday, October 3, 2012 12:31 PM
------------------------------------
Reply:
So I noticed... :)
I was actually responding to Vuk Kadija's post.
Hth, Anders Janson Enfo Zipper
------------------------------------
Reply:
- does the client, when on the outside, register in DNS with its external IP? - no, it is registered with Teredo or IP-HTTPS or 6to4 IPv6 address.
- have you created the necessary inbound rules on the client that allows traffic to the client (incl enabling edge traversal)? - yes I followed this reference (http://blogs.technet.com/b/tomshinder/archive/2010/10/29/test-lab-guide-demonstrate-uag-sp1-rc-directaccess-remote-management-blog-version.aspx). I can RDP from DA server to DA ext client, but from inside corp network NO. Also, I enabled Windows firewall logging and I can see only ICMP packets no RDP 3389 is in the log. I can ping client from SCCM or any other server that is configured in application tunnel.
I have read that article, thank you, but no progress. Any suggestions?
------------------------------------
Reply:
The first problem you need to focus on is why the client does not register in DNS. For manage-out, you need the client IPv6 address in DNS.
Things to look at;
- Client event logs
- Event logs on DNS server
- Make a Network Monitor/Wireshark trace when a client connects and see if it even attempts to register in DNS.
- After a client has connected and DNS registration failed, attempt a manual registration in DNS and verify event logs and also trace the registration.
Hopefully that would point you in the right direction.
Hth, Anders Janson Enfo Zipper
------------------------------------
Reply:
No no, client automatically registers AAAA record in DNS. Maybe we did not understand.
If a client is Teredo or IPHTTPS or 6to4, it always registers with new IPv6 address.
------------------------------------
Reply:
Have you configured ISATAP? That is needed in order for the management machines to know where to find the client and how to get there.
Jason Jones has written an excellent blog entry on implementing a limited version ISATAP without turning your entire internal network into an ISATAP based IPv6 network.
http://blog.msedge.org.uk/2011/11/limiting-isatap-services-to-uag.html
Hth, Anders Janson Enfo Zipper
------------------------------------
Reply:
I have Created Detail Videos and want to share on How to Install Windows Server 2012 Direct Access with Single Network Card Configuration and windows 8 Clients
http://www.youtube.com/watch?v=CNJOziif03k
And Windows Server 2012 Direct Access with Basic PKI Configuration and Windows 7 Clients
http://www.youtube.com/watch?v=_jgamV0XDiM
Hope this will help
If you like these video please subscribe, like, and Share------------------------------------
Windows 8 RTM UI Feedback
Some Windows 8 RTM UI feedback.
1) The translucent taskbar is distracting. I don't think this was as much of a problem in Windows 7 because of the Aero glass blur. In Windows 8 if you have a fullscreen remote desktop session into another computer in the background and an application from your primary desktop in the foreground you can clearly see the remote desktop's taskbar beneath your own; very distracting. That and details from your desktop background are visible; annoying if it's a photograph.
2) Window borders are very poorly defined because everything is solid gray if the window isn't active. Again, the Windows 7 Aero glass blur added a subtle hint to distinguish window borders from normal UI elements. In Windows 8 you can't always tell if you're looking at a window on top of another window or two UI elements within the same window because everything is monotone and square. The Windows 8 Release Preview wasn't nearly as bad.
3) Not having a visible start button makes it difficult to open the start menu when remoting into a Windows 8 system in a windowed RDP session.
Reply:
Please remember to click "Mark as Answer" on the post that helps you, and to click "Unmark as Answer" if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. "
------------------------------------
Display under Windows 7
Few days ago,
i have founded that i can not see some files stored in memory stick(some of them are not visible-folders and files).
Today i saw, that i can not read letters in my e-mail, received from United States Labor Department.
When i opened letters-there were not contain.Only receive and sender.
The letters don't look like blank, but as empty message-only e-mail address.
I have opened them under Ubuntu to another computer(i mean made the same activity-open e-mail, and then letters).Everithing was O.K.
Last week i saw them.
Now i don;t know where is the problem:In Win7 or my laptop "Toshiba Tecra m1".
Few months ago- i bought a software from TGC, and when i had installed on Toshiba- there was not
many visible items.
The same sowtware we had installed on our older mashine(under 1gh processor), but under XP and the result was great.
Someone said that i must update display driver, but i didn't find for Toshiba under Win7.
So my question is:
What can i make in order to see again my e-newsletters?
p.s. yesterday with help from you i repaired desktop icons with reg.exe.
- Edited by Vasil Popov Friday, October 5, 2012 10:02 AM
- Moved by Paul E Long Friday, October 5, 2012 1:38 PM (From:Network Monitor)
Reply:
Please perform system restore before the issue occurred for a test.
Meanwhile, you need to confirm with TGC if the software is compatible with Windows 7.
Niki Han
TechNet Community Support
------------------------------------
Experience the new dashboard for Windows Server Essentials 2012
The dashboard is a centralized place to manage the server; the new Windows Server Essentials 2012 include many new features and improvements:
- Managing on-premises Exchange Server
- Managing a second server
- Configuring folder redirection and security settings via Group Policy
- Storage space integration
- Enabling Media functions
- Monitoring users' remote connections
- Full Windows PowerShell support
Follow this blog with Mike about the new dashboard overview:
This post is "AS IS" and confers no rights. Ning Kuang[MSFT] Windows Server Program Manager
Reply:
Really awesome!
Regards,
James
James Xiong
TechNet Community Support
------------------------------------
No comments:
Post a Comment