[Forum FAQ]How to do Sysprep in Windows 10 Insider Preview Build 10130
Symptom:
Someone may would like to Sysprep Windows 10 Insider Preview Build 10130 for a test. However, when they run Sysprep in Windows 10 Insider Preview Build 10130, they may find that an error message pops out saying that:
A fatal error occurred while trying to Sysprep the machine.
Then check the Sysprep setupact.txt log, we could find the logged error saying this:
SYSPRP Encountered error 0x80070020 while deleting contents of package repository. Another process, likely Windows Installer service, is accessing the files inside
'C:\ProgramData\Microsoft\Windows\AppRepository'.
Try stopping the Windows Installer service and ensure that no other process is accessing files inside this directory before retrying [gle=0x00000012]
'C:\ProgramData\Microsoft\Windows\AppRepository'. This folder is used for storing the information about Windows Store Apps, as we may find out, a newly created in Windows 10 Insider Preview Build 10130, there would be some Windows Store Apps still under the downloading/installing process when we logon the first time.
Which I suspect should be root cause of this issue here.
Workaround:
So in the current situation, if we would like to run Sysprep successfully on the newly created Windows 10 Insider Preview Build 10130 machine, we need to wait until the Apps finishing their installation, then we can run the Sysprep with the built-in admin account.
If Sysprep fails with the above error, then please wait for another hours.
The first time I failed sysprep, and the next day when I run the sysprep under C:\Windows\system32\sysprep, and select the generalize option, it failed a second time, but with a different error message:
[0x0f00ae] SYSPRP WinMain:Hit failure while processing sysprep cleanup external providers; hr = 0x8007001f
See the picture for this error:
Then I open registry and find the following archive:
HKEY_LOCAL_MACHINE\SYSTEM\Setup\Status\SysprepStatus
Chnage the value of GeneralizationState from 3 to 7, then run the Sysprep again.
This time Sysprep finished and the machine reboot successfully.
Please click to vote if the post helps you. This can be beneficial to other community members reading the thread.
Upcoming changes to Windows 10 Insider Preview builds
Reply:
------------------------------------
How can we get Windows 10? : Upcoming changes to Windows 10 Insider Preview builds [UPDATED 6/22]
- Edited by Ashidacchi Monday, June 22, 2015 10:00 PM
- Changed type Ashidacchi Monday, June 22, 2015 11:36 PM
Reply:
You can either join the insider program now or wait until win 10 is released on July 29. All qualifying OS'S should start being updated via windows update then
http://windows.microsoft.com/en-ca/windows/preview-faq
You can read more about it here http://windowssecrets.com/top-story/what-you-should-know-about-the-win10-launch/
*
Wanikiya and Dyami--Team Zigzag
- Edited by ZigZag3143xModerator Monday, June 22, 2015 11:07 PM
------------------------------------
Reply:
How can we get Windows 10?
Upcoming changes to Windows 10 Insider Preview builds [UPDATED 6/22]
Aschidacchi Hokusosha,
You posted a recent Blogging Windows.
Your intention is to inform members of the new blog.
I am sure your intention is NOT to ask question and you were not asking for help.
Therefore, you should change the Type category from Question to Discussion.
How to change type?
May be my 2 screenshots will explain adequately.
- Edited by david hk129 Tuesday, June 23, 2015 12:52 AM
------------------------------------
Reply:
Thank you for the comment. I'm already joining Insider Program, and using Windows 10(10130) on several machines(physical and virtual), waiting for 29 July.
Best regards,
------------------------------------
Reply:
Thanks a lot. and sorry for my mistake. I'v changed the thread type to "General discussion".
Best regards,
------------------------------------
Reply:
Wanikiya and Dyami--Team Zigzag
------------------------------------
Reply:
Hi david hk129,
Thanks a lot. and sorry for my mistake. I'v changed the thread type to "General discussion".
Best regards,
Nobody was born and knew everything.
As long as you know now, that's good enough.
------------------------------------
Who I can, insert sentence for to AWK
Hi, I need put insert a for sentece in this AWK command, Tks
for (i = 1; i <= NF; i++)
awk '$i == "14" { sum += $3 } END { print "Cajica "$i " "sum }' testlog.out
- Changed type Bill_Stewart Sunday, July 19, 2015 10:40 PM
- Moved by Bill_Stewart Sunday, July 19, 2015 10:40 PM Abandoned drive-by question
Reply:
-- Bill Stewart [Bill_Stewart]
------------------------------------
Reply:
This is the second "can someone rewrite this awk code as PowerShell for me" question where we have requested further information.
What is the input data, and what should the output look like?
-- Bill Stewart [Bill_Stewart]
------------------------------------
Power BI Page Size should be left for user to decide
There are many use cases where report elements do not fit into the current size of Power BI single page, not having cross page filters is making it worse. Why can't we leave Page size open for end user / designer to decide.
Thanks,
Nasir
Reply:
Hi Nasir,
The best place to provide this feedback would be here: https://support.powerbi.com/forums/265200-power-bi. If you create a suggestion there, others can vote on it and it will be more visible to the Power BI team.
Regards,
Michael Amadi
Please use the 'Mark as answer' link to mark a post that answers your question. If you find a reply helpful, please remember to vote it as helpful :)
Website: http://www.nimblelearn.com, Twitter: @nimblelearn
------------------------------------
techpowerup moderator human experiment
http://www.techpowerup.com/forums/threads/lower-clocked-i5-faster-than-higher-clocked-i7-with-280x.213559/#post-3299766
yeah thats me xfia that screwed up at first reading fast.
is this not a joke? a few days ago there was someone that had a issue and i said how it was impossible to figure out with out the right diagnostic tools but people where insistent it was whatever so i just finished with saying they might actually get to the bottom of it at technet.
iron8orn AMD FX 6350@4.4ghz on MSI 970A-G46 8gb ram cas 8 1600mhz cpu-nb 2400mhz MSI hd7850x2 ht-link 2400mhz
- Moved by Just Karl Monday, June 22, 2015 2:37 PM Off-Topic
- Changed type ZigZag3143x Monday, June 22, 2015 2:58 PM Not a question in sight
Reply:
surprised you didnt delete this yet lol must be interested..
well idk what they are thinking over there but there has been so many misleading articles there.
most recent was criticizing amd's ceo for saying the r9 nano will be perfect for living room small form factors because it doesn't have hdmi 2.0 yet the 3 displayports that the fury gpu's have are perfect for anyone due to being enabled to transfer hdmi2.0 via cheap adapter and gives way more bandwidth as im sure you guys know around here means no subsampling for 4:4:4 at 4k 60hz and what you need for 5k along with alot of smaller resolution displays.
iron8orn AMD FX 6350@4.4ghz on MSI 970A-G46 8gb ram cas 8 1600mhz cpu-nb 2400mhz MSI hd7850x2 ht-link 2400mhz
- Edited by 1ron8orn Friday, June 19, 2015 10:02 PM
------------------------------------
Reply:
Hello,
The Windows Desktop Perfmon and Diagnostic tools forum is to discuss performance monitor (perfmon), resource monitor (resmon), and task manager, focusing on HOW-TO, Errors/Problems, and usage scenarios.
Since your post is off-topic, I am moving it to the off topic forum.
Karl
When you see answers and helpful posts, please click Vote As Helpful, Propose As Answer, and/or Mark As Answer.
My Blog: Unlock PowerShell
My Book: Windows PowerShell 2.0 Bible
My E-mail: -join('6D73646E5F6B61726C406F75746C6F6F6B2E636F6D'-split'(?<=\G.{2})'|%{if($_){[char][int]"0x$_"}})
------------------------------------
Reply:
Hello,
I haven't deleted it yet because I am still trying to figure out what in the world you are talking about ;)
Karl
When you see answers and helpful posts, please click Vote As Helpful, Propose As Answer, and/or Mark As Answer.
My Blog: Unlock PowerShell
My Book: Windows PowerShell 2.0 Bible
My E-mail: -join('6D73646E5F6B61726C406F75746C6F6F6B2E636F6D'-split'(?<=\G.{2})'|%{if($_){[char][int]"0x$_"}})
------------------------------------
Reply:
i thought it was a serious joke about some of things the mods are saying or a experiment with trouble shooting but its not..
they are highly cynical and have not listened to anything that the people that actually make technology are trying to tell them in years.
one article is just how important is gpu memory bandwidth and they say the measurements might be wrong for starters. like why is there compression now on shorter memory bus and why have they made hbm? it really doesnt take a scientist or engineer to see trends and what they mean.. especially when you can watch videos made simple enough like the discovery channel that a kid could start learning.
well i would like to say very nice job on the multi threaded command buffer and async shaders from what i have seen if you or anyone you know worked(ing) on them.
its almost baffling how many just cant grasp what it all means.
iron8orn AMD FX 6350@4.4ghz on MSI 970A-G46 8gb ram cas 8 1600mhz cpu-nb 2400mhz MSI hd7850x2 ht-link 2400mhz
- Edited by 1ron8orn Monday, June 22, 2015 6:24 PM
------------------------------------
Exchange 2013 - EML files missing attachments when not running in cached exchange mode.
Hi,
We have recently upgraded from Exchange 2010 to Exchange 2013. Since the migration we have had issues with our archiving system. Bascially the archiving system creates .eml files types
When Outlook is running in non-cached exchange mode any attachments within these .eml files are missing when the eml file is opened. If you change Outlook to run on cached mode the attachments show up fine.
It's almost identical to the following issue;
http: // social.technet.microsoft.com/Forums/office/en-US/b9a390a9-e014-4098-ad6e-dd377a53422a/office-2010-exchange-2010-attachments-in-emlemails-are-invisible?forum=outlook
Except for the Exchange version this is exactly what is happening to us. Is anyone aware of whether the same issue fixed in Rollup update 5 for Exch 2010 SP1 is present in Exchange 2013?
Reply:
Hi
What version of Exchange 2013 are you running?
Hope this helps. Please remember to click "Mark as Answer" on the post that helps you, and to click "Unmark as Answer" if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.
------------------------------------
shared sever vs dedicated server
hi
I am software developer .
need to know about server administration
my applications on shared server
they taking time to load
some applications capturing data runtime but due to loading time data loss happens
should i go for dedicated serer
Get more time to execute sql query when field has 50 kb string
When I run the SQL script (SELECT Column1 FROM Table1) it takes more time (approximately 25-30 seconds) to execute a query.
Column1 data type : NVARCHAR(MAX)
Column1 data size : 50.2 kb
Can any one explain the reason for this long execution time?
- Edited by LT_Aravindh Monday, June 22, 2015 12:19 PM
Reply:
Could take time to fetch all the rows from disk, or it could be blocking, ....
You can see for yourself by
SET STATISTICS IO ON
SET STATISTICS TIME ON
before running the query in SSMS. Then you will see messages about the resources used by the query.
David
------------------------------------
A solution for systems management
- Dell KACE K1000 Systems Management and K2000 Systems Deployment Appliances
- LANDESK Management Suite 9.6 SP1
- Microsoft System Center 2012 R2 Configuration Manager (SCCM)
- Symantec Altiris Client Management Suite (CMS) 7.5 SP1
http://en.community.dell.com/techcenter/b/techcenter/archive/2015/03/16/why-do-you-need-a-systems-management-solution-and-which-one-is-the-best-for-you-new-white-paper-from-ema-has-the-answers
- Moved by Just Karl Monday, June 22, 2015 2:42 PM Off-Topic
- Changed type ZigZag3143x Monday, June 22, 2015 2:57 PM Not a question in sight
Reply:
Hello,
The TechNet Wiki Forum is a place for the TechNet Wiki Community to engage, question, organize, debate, help, influence and foster the TechNet Wiki content, platform and Community.
Please note that this forum exists to discuss TechNet Wiki as a technology/application.
Since your post is off-topic, I am moving it to the off topic forum.
Karl
When you see answers and helpful posts, please click Vote As Helpful, Propose As Answer, and/or Mark As Answer.
My Blog: Unlock PowerShell
My Book: Windows PowerShell 2.0 Bible
My E-mail: -join('6D73646E5F6B61726C406F75746C6F6F6B2E636F6D'-split'(?<=\G.{2})'|%{if($_){[char][int]"0x$_"}})
------------------------------------
how to find wireless in windows
i want to know how can i find wireless in window 7 home basic i am try but there is no option i am serched my system management and administration but i am not found any option wireless network connection so can you find this for me
thank you
vinod
- Moved by Just Karl Monday, June 22, 2015 2:40 PM Looking for the proper forum.
Reply:
------------------------------------
Reply:
i want to know how can i find wireless in window 7 home basic i am try but there is no option i am serched my system management and administration but i am not found any option wireless network connection so can you find this for me
thank you
vinod
Hi,
Please refer this Microsoft document fir setting up a wireless network - http://windows.microsoft.com/en-us/windows/setting-wireless-network#1TC=windows-7
------------------------------------
Reply:
------------------------------------
Reply:
------------------------------------
Reply:
Hello,
I'd ask in the Windows 7 forum on Microsoft Community.
As the Microsoft Community is on a different platform, we cannot move the question for you.Once there, click on Participate near the top of the screen, and select 'Ask a Question' or 'Start a Discussion':
Karl
When you see answers and helpful posts, please click Vote As Helpful, Propose As Answer, and/or Mark As Answer.
My Blog: Unlock PowerShell
My Book: Windows PowerShell 2.0 Bible
My E-mail: -join('6D73646E5F6B61726C406F75746C6F6F6B2E636F6D'-split'(?<=\G.{2})'|%{if($_){[char][int]"0x$_"}})
------------------------------------
Reply:
Hello,
The Windows Desktop Perfmon and Diagnostic tools forum is to discuss performance monitor (perfmon), resource monitor (resmon), and task manager, focusing on HOW-TO, Errors/Problems, and usage scenarios.
As the question is off topic here, I am moving it to the Where is the Forum... forum.
Karl
When you see answers and helpful posts, please click Vote As Helpful, Propose As Answer, and/or Mark As Answer.
My Blog: Unlock PowerShell
My Book: Windows PowerShell 2.0 Bible
My E-mail: -join('6D73646E5F6B61726C406F75746C6F6F6B2E636F6D'-split'(?<=\G.{2})'|%{if($_){[char][int]"0x$_"}})
------------------------------------
Good & helpful practices
Thought this was interesting... 1 because of where it was found, 2 because it is not full of BS or trying to sell some junk 3 some want to be negative about CCleaner yet... 4 some want to bash Windows Defender yet...
Anyway, check THIS out, sometime.
Cheers,
Drew
Drew MS Partner / MS Beta Tester / Pres. Computer Issues Pres. Computer Issues www.drewsci.com
- Moved by Just Karl Monday, June 22, 2015 2:35 PM Off-Topic
Reply:
Hello,
The Windows Desktop Perfmon and Diagnostic tools forum is to discuss performance monitor (perfmon), resource monitor (resmon), and task manager, focusing on HOW-TO, Errors/Problems, and usage scenarios.
Since your post is off-topic, I am moving it to the off topic forum.
Karl
When you see answers and helpful posts, please click Vote As Helpful, Propose As Answer, and/or Mark As Answer.
My Blog: Unlock PowerShell
My Book: Windows PowerShell 2.0 Bible
My E-mail: -join('6D73646E5F6B61726C406F75746C6F6F6B2E636F6D'-split'(?<=\G.{2})'|%{if($_){[char][int]"0x$_"}})
- Edited by Just Karl Monday, June 22, 2015 2:35 PM
------------------------------------
The handle is invalid
I have a network drive that have been joined to my domain. I receive "The handle is invalid" anytime I try to access it through the UNC eg. \\netdrive but this same UNC works for the computers that are not joined to the domain.
Ping responds alright from the server and domain computers but a UNC connection to it simply does not work.
I wonder where the problem is actually coming from, will it have something to do with Windows server 2012 or Windows 7 Pro.
See a link to screenshots of the problem.
https://onedrive.live.com/view.aspx?resid=4B65B918A72B3C69!1844&ithint=file%2cpdf&app=WordPdf&authkey=!AHgMrcK-48pa5lo
Please can anyone help me with solution?
Thanks,
Harrison.
- Changed type Vivian_Wang Monday, June 29, 2015 10:30 AM
- Moved by StevenGravesMicrosoft employee Friday, July 31, 2015 4:23 PM Wrong forum
Reply:
Hello! This forum is meant for questions and discussion about the Windows Server Technical Preview. There are separate forums for 2012 questions, and for Win 7 questions. I would start with the 2012 forum, here:
Thank you!
Jess Cunningham
Windows Beta Support Team
------------------------------------
Updating App-V apps deployed by SCCM
Hi,
If I use SCCM 2012 to deploy my sequenced packages, using download and execute (no streaming from distribution points) method I understand that the package will be downloaded to the local SCCM cache and when a user launches the app the App-V client copes the content into the App-V cache.
What happens when I update the package on the SCCM server? If I create a new deployment for the updated package will the whole thing download to the SCCM cache? I am looking for a method of only downloading the differences if possible (I know this would probably be a lot easier if I choose streaming instead of download and execute!).
Any ideas?
Thanks
Reply:
OK so I think I found the answer but have not had the chance to test yet but I believe this is the answer:
- Remote Differential Compression (RDC) is a data transfer method that optimizes data transmission over the network. Configuration Manager uses RDC to send only the portions of files that have changed to clients when virtual application package content is updated. The Configuration Manager Client uses RDC to build a new version of a virtual application package based on the current version of the package and the changes that are sent to the client.
Anyone have any experience using RDC?
------------------------------------
Reply:
I'm presuming you upgrade you're existing package in the App-V sequencer and are then adding that new package into SCCM and using the supersedence option? You can also retire the old package which will remove the files from the SCCM cache on its next deletion cycle.
When you create a new deployment in SCCM, for you're upgraded package, it will download those package files in full (download and execute) into the SCCM cache. At this point SCCM client will attempt to Add/Mount and Publish this package; depending on whether its targeted at a user or computer collection. It's only at this point will the App-V client determine if its an upgrade at which time if will perform a differential (delta) upgrade.
It uses RDC when you are just updating the content for an existing package i.e. modifying the dynamic configuration files.
If disk space is a limiting factor for you then you should look at using the "stream content from DP" in conjunction with the Shared Content Store.
Here is a blog by Thamim Karmin that you might find useful.
------------------------------------
my computer has blue screen and restarted without my order
How do you interpret this.........
Microsoft U-turns on 'free' Windows 10 upgrade promise for ALL previewers
English is not my first language and I am having trouble interpreting the article.
Bottom line :
I have Microsoft account connected to ALL my computers running Windows OS.
I am dual booting Win 8.1 Pro with Insider Preview build 10130.
Needless to say, my Insider preview was a clean install on a separate partition.
Now, besides getting a free upgrade from my Win 8.1 Pro, do I also get a free Win 10 RTM out of my Insider Preview ?
I have been maintaining that only my Win 8.1 Pro will get a free upgrade, but not my Insider Preview.
Seems to me Gabriel Aul's recent clarification is pointing to that .
- Edited by david hk129 Monday, June 22, 2015 1:57 PM
Reply:
------------------------------------
Reply:
There has been plenty of speculation on this, but according to the official Q&As it is still a full version - not a trial or introductory version.
https://www.microsoft.com/en-us/windows/windows-10-faq
Under "Is the upgrade really free?"
1. Nobody says it will be a trial version. Anyone who has gone this far knows that.
2. That FAQ does not answer my question.
------------------------------------
Manage Your Organization in ecp does nothing
I'm trying to create a Role group that only lets users modify the existing AGL. Specifically, the members will need to mark old users as Hidden, but I know I can't get that granularity. I have created a Role Groupe called AddressMgr with Addree List Role, the scope of domain.com, and added the users to it.
I'm kind of new at this, and know I'm missing something important here. The users can loginto ecp, but when the try to open Manage Your Organization, nothing happens. What am I missing?
Thanks
Reply:
Hi,
When you say nothing happens, what you mean by that? Can you elaborate more on it?
Gulab Prasad,
MCITP: Exchange Server 2010 | MCITP: Exchange Server 2007
MCITP: Lync Server 2010 | MCITP: Windows Server 2008
My Blog | Z-Hire Employee Provisioning App
Skype: Exchange.Ranger
------------------------------------
Reply:
If I, who has full rights to everything, clicks on the link in Options in owa, then See All Options, it takes me to the ecp. In there I see all Mailboxes, Users and Groups, etc. If one of my users in the AddressMgt group does the exact same thing, when they click on Manage Your Organization, it's as if they clicked on no link at all. It does nothing. Other links in the right panel work, but not that one. I think I have omitted a step in granting them access to this.
This is an on-site Exchange, btw.
- Edited by LonesomeDove Saturday, January 28, 2012 4:53 AM
------------------------------------
Reply:
Ok, I got it...so you are not able to see what I see in my OWA for those users.
Add another user in this Group and check...Did you check with all the browsers?
Gulab Prasad,
MCITP: Exchange Server 2010 | MCITP: Exchange Server 2007
MCITP: Lync Server 2010 | MCITP: Windows Server 2008
My Blog | Z-Hire Employee Provisioning App
Skype: Exchange.Ranger
------------------------------------
Reply:
I made a copy of one of the users I am trying to affect. Zoe Zygote, a small man, but an exact copy of my target users. Here is what he sees, and if you scroll to the right, you will see that "Manage Your Organization" is blue, so it has been clicked on, but after 10 minutes, nothing happens. The status bar doesn't display anything. I have deleted and recreated the ecp folder, in case you are wondering.
- Edited by LonesomeDove Saturday, January 28, 2012 5:27 AM
------------------------------------
Reply:
Hi,
check if you have the key register "OMECPDisabled" under "HKEY_LOCAL_MACHINE\SOFTWARE\MICROSOFT\ExchangeServer\v14." remove it.
http://technet.microsoft.com/en-us/magazine/hh848768.aspx
Regards,
Best Regards Don't forget to mark it as answer if it helps
------------------------------------
Reply:
1. Download and install IIS 6 Resource Kit. (It is fully compatible with IIS 7).
2. Login as the local Administrator. Domain admin will not do.
3. Open Metabase Explorer in RK Tools.
4. Navigate to LM – W3SVC – 1 - Root
5. Delete the ECP key and sub keys.
6. Open EMS and run New-EcpVirtualDirectory.
&. Sigh from relief.
------------------------------------
Reply:
I confirm that this solution worked.
We experienced the same problem.
Tnx .
PS: we needed to remove the old ecp virtual directory with Remove-EcpVirtualDirectory
------------------------------------
Is it possible to copy a package?
Hello,
I have Sccm 2012 and I'm looking a way to copy a package (with deploy configuration, scripts, etc) from one collection to other collection because I want to avoid create the same package for 12 collections but I'm not be able to find a way to do it.
Thnak you in advance for the Help.
Reply:
Cheers Paul | http://sccmentor.wordpress.com
------------------------------------
Reply:
Thank you for the answer,
I thought that option, but I want that the pakage is in the different distributions points, I don't want to have problems with the line because there are a lot of collections with a lot of computers in different contries. I need to have the package in each distribution points.
------------------------------------
Reply:
Cheers Paul | http://sccmentor.wordpress.com
------------------------------------
Reply:
Hello,
I'm not sure what do you want to say, can you explain it better. Currently I have a collection for each office and each country, also I have a distribution point and boundary for each collection.
Thank you.
------------------------------------
Reply:
You can organise your DP's into groups and apply them to particular boundaries but it sounds like you are already doing this with your DP's (they don't have to be in groups).
When you create a package you distribute it to the DP's and this where the package is copied to, not the collections. You then deploy the package to the collection and this targets that package at any of the clients in the collection. They then download the package from the DP's when they pick up that deployment from policy.
Cheers Paul | http://sccmentor.wordpress.com
------------------------------------
SCCM 2012 Private Cloud
Dear All,
I Certified SCCM2012 , Now I would become to SCCM2012 Private Cloud MCSE so I would request all can you just guide me how to take turn .
How to practice in our home environment ?
Etc ..!
Best Regard's Krishna
Reply:
AFAIK,there is no specific course for Configmgr 2012 Private cloud .The private cloud is available for system center 2012 products. more information about the private cloud certificate for system center is here https://www.microsoft.com/learning/en-in/exam-70-246.aspx and https://www.microsoft.com/learning/en-in/exam-70-247.aspx
Eswar Koneti | Configmgr Blog: www.eskonr.com | Linkedin: Eswar Koneti | Twitter: eskonr
------------------------------------
Reply:
Eswar,
Can I get the document / Blog how to setup the private Cloud SCCM 2012 ?
Best Regard's Krishna
------------------------------------
Reply:
Eswar Koneti | Configmgr Blog: www.eskonr.com | Linkedin: Eswar Koneti | Twitter: eskonr
------------------------------------
WSUS Server itself does not update, error: 80244019
Hello,
we have set up a new WSUS Server 2012 R 2 in order to replace our old w2k3 WSUS. The WindowsUpdate information is pushed to cleints/server via GPO's. There is one GPO for all Domain Servers (WSUS is one of them). Everything works fine so far, beside WSUS it self. I mean the OS Server where WSUS Services runs on.
WSUS Servicees work fine, we download patches from Widnows update and they are deployed, reso. requested and downloaded by all clients from our WSUS than. But the WSUS server itself when it checks for updates,it gets notified about e.g. 70 updates to be applied. Once I say install updates it returns error code 80244019.
I have to say that the policy sets WUServer, WUStatusServer and a TargetGroup, and some other settings like reboot yes/no, etc..... Identical settings, same GPO) works for all other servers in the network.
Also, I have set WSUS port to 80 from 8530 or 8531, whatever it was.
telnet wsus.domain.intra 80 works from the localhost (WSUS)
Any idea why WSUS itself is special?
kind regards,
Dieter Tontsch
PS:
this is what I see in the Event Log, ID 1001
Event Name: WindowsUpdateFailure2
Response: Not available
Cab Id: 0
Problem signature:
P1: 7.9.9600.17031
P2: 80244019
P3: 34CBB58A-0567-4183-80A2-4659766883DC
P4: Download
P5: 101
P6: Managed {3DA21691-E39D-4DA6-8A4B-B43877BCB1B7}
P7: 0
P8:
P9:
P10:
Attached files:
These files may be available here:
C:\ProgramData\Microsoft\Windows\WER\ReportQueue\NonCritical_7.9.9600.17031_7184bfc5c320c0f8948b2b3ae24749b74782586_00000000_cab_0ec23fa4
Analysis symbol:
Rechecking for solution: 0
Report Id: e4875146-159a-11e5-80be-00505685263b
Report Status: 4
Hashed bucket:
- Edited by Dieter Tontsch, mobileX Thursday, June 18, 2015 9:20 AM addition event log
Reply:
...we have set up a new WSUS Server 2012 R 2 in order to replace our old w2k3 WSUS.
Also, I have set WSUS port to 80 from 8530 or 8531, whatever it was.
telnet wsus.domain.intra 80 works from the localhost (WSUS)
Any idea why WSUS itself is special?
WSUS on WS2012/R2 does not run on port 80; it runs on port 8530 (or 8531 if you implemented SSL).
Regardless of WSUS-as-client or other clients, WSUS v6 (WS2012/R2) does not run or port 80.
Unless you have reconfigured it to do so - which is AFAIK totally unsupported.
IIS will be listening on the default website on port 80 but that is not WSUS client webservice.
For the WUAgent problem on WSUS itself, just as for any other WSUS client you must examine the c:\windows\windowsupdate.log
It may be a name resolution or routing issue, in case your WSUS is multi-homed ?
Don
(Please take a moment to "Vote as Helpful" and/or "Mark as Answer", where applicable.
This helps the community, keeps the forums tidy, and recognises useful contributions. Thanks!)
------------------------------------
Reply:
port 80 may not be supported, but in this case it was not the issue - since my server in charge could communicate with wsus without any issue. I have switched back to 8350 however afterwards, but my update started working again after I did once "wuauclt.exe /resetauthorization /detectnow". It only started working again after that, not after any reboot or so. I guess /resetauthorization was the key parameter.
------------------------------------
No comments:
Post a Comment