get the request parameter in response XML
- Edited by Jessy2102 Sunday, August 26, 2012 9:52 AM
Reply:
Hi Mich2102,
I'm afraid your question is not clear at all.
Could you please rephrase? What is your problem and what is the situation you are in.
For example: what does your xml look like? What do you want to do with it?
Pieter Vandenheede - Codit
------------------------------------
Reply:
thanks for the response Peter.the service i am receiving is in the REST XML format ...it doesn't have wsdl attached to it instead it gives me some parameters which i can pass and get the XML. as we need to use this service in different applications, its not feasible to use the link directly. so i am trying to consume the service (or resource) in biztalk and trying to publish the orchestration as webservice and use this webservice in our applications.
the first thing i need to know is, is it possible to do it in BizTalk (2009)
request service link looks something like this http://webserver/ws/Service1?CustNo=123456
response XML is
<channel>
<title>Service1</title>
<Date>2012-08-30</Date>
<TranType>Response</TranType>
<record>
<CustNo>123456</CustNo>
<EmplNm/>Dan<EmplNm/>
<Status>false</Status>
<msg>Invalid</msg>
</record>
</channel>
Thanks & Regards
Mich
- Edited by Jessy2102 Thursday, August 30, 2012 5:45 AM
------------------------------------
Reply:
I have found an article in technet about the same . but it is in BizTalk 2010.
http://social.technet.microsoft.com/wiki/contents/articles/2474.invoke-restful-web-services-with-biztalk-server-2010.aspx
Mich
- Edited by Jessy2102 Thursday, August 30, 2012 6:05 AM
------------------------------------
Reply:
------------------------------------
join windows server 2012
Atthachai
Reply:
Ed Crowley MVP "There are seldom good technological solutions to behavioral problems."
------------------------------------
Integration Services - Hyper V - Detect HAL
Hi All,
I have a pretty powerful machine running 128 GB RAM and 2* 8 Core Processor with Windows 2008 R2 Ent. 64.
Created some VM's in it, but the mouse is not capture, so went through a lot of research that to use MSCONIFG -> Detect HAL to resolve the issue.
However to my surprise i do not have Detect HAL Option in my Advanced boot options for MSCONFIG; can somebody tell me where i am going wrong. Also i i tried attaching the VHD file to system manager but didnt work out.. please guide me asap...
thanks in advance...
Apoorv Mehrotra
Reply:
Hi,
What's the operating system running on the virtual machines? You need to install Integration Services within the virtual machines.
------------------------------------
Reply:
Apoorv Mehrotra
------------------------------------
Reply:
Hi,
You need to download Linux Integration Services for Hyper-V and install it.
Linux Integration Services Version v3.3 for Hyper-V
http://www.microsoft.com/en-us/download/details.aspx?id=29991
------------------------------------
Reply:
Apoorv Mehrotra
------------------------------------
Pages in IE8 don't load
Reply:
Hi,
Based on my research, please try the following:
1. Run Internet Explorer (No Add-ons) Mode and see how it works.
2. Check if resetting Internet Explorer settings can help you.
3. Test if issue also occurs in Safe Mode with networking.
If the issue does not occur in Safe Mode, please use ShellExView to disable related extensions of Internet Explorer in Normal Mode:
1) Please download ShellExView.
Note: The third-party product discussed here is manufactured by a company that is independent of Microsoft. We make no warranty, implied or otherwise, regarding this product's performance or reliability.
2) Extract the download file and double-click the "shexview.exe" file. It will scan the registry for all the shell extensions.
3) Select all the non-Microsoft extensions in pink by press "Ctrl" in the keyboard.
4) Click the "Disable Selected Items" on the toolbar and click Yes.
5) Restart your computer and check if the issue is resolved.
If issue persists, due to the issue is related to Internet Explorer, it is recommended to post the issue in Internet Explorer related forums.
Hope this helps.
Jeremy Wu
TechNet Community Support
------------------------------------
NOTICE! Retirement Announcement Errors on Certification Site
These five exams are retiring on July 31, 2013 but don't state it in their description!
http://www.microsoft.com/learning/en/us/exam.aspx?ID=70-620
http://www.microsoft.com/learning/en/us/exam.aspx?ID=70-622
http://www.microsoft.com/learning/en/us/exam.aspx?ID=70-623
http://www.microsoft.com/learning/en/us/exam.aspx?ID=70-681
http://www.microsoft.com/learning/en/us/exam.aspx?ID=70-669
The Microsoft Certification Lifecycle page is supposed to list all exams are that retiring in the next twelve months. However, it is currently missing four exams that retire on July 31, 2013!
http://www.microsoft.com/learning/en/us/certification/cert-lifecycle.aspx#tab2
Exams missing: 70-620, 70-622, 70-623, 70-681
The only way that I know that the five exams near the top are retiring is from the MCITP page:
http://www.microsoft.com/learning/en/us/certification/mcitp.aspx#tab2
Good luck!
Best wishes, Davin Mickelson
How can i configure Database, TEMP, Log and backup directories?
Hi all,
Im creating a SQL Server with SQL 2008 R2, and i wanna know where i put the database, temp, log and backup directories. In the Setup of SQL Server, in the "database engine configuration" step, i can move them to a separate directory. I have 4 disks to use.
Reading on internet, people say that i have to use:
- 1 to O.S.;
- 1 to Database;
- 1 to Log
- 1 to TEMP
People say that its interesting save SWAP into another partition, but in my scenario i cant. My doubt is if i have to save database log with database directory or with temp log? And temp directory, put together with database directory or with temp log?
Could someone help me?
thanks in advance
Pedro Barbosa Itil, Windows 2008 Server
Reply:
Hello,
What type of storage you have? Do you have RAID 10, RAID 5 or RAID 1?
If you have RAID 10 you can have all database files on just one RAID 10 partition.
Hope this helps.
Regards,
Alberto Morillo
SQLCoffee.com
------------------------------------
Reply:
hello Alberto,
i have a DAS Storage Dell MD3200 with SAS Disks in Raid 5 + 1.
Pedro Barbosa Itil, Windows 2008 Server
------------------------------------
Reply:
Hello,
Try to put the data files on the RAID 5 and the log files on RAID 1. Although, RAID 5 is slow on write operations.
Hope this helps.
Regards,
Alberto Morillo
SQLCoffee.com
------------------------------------
Reply:
Thanks Alberto. My last doubt is where and which data i put in each partition created.
Just for remember, i have:
c: - O.S. ;
d: - Database;
e: - Log Files
f: - Temp
On this image you can see my doubt. Which one i have to put in which partition?
http://imageshack.us/photo/my-images/189/screenshot017d.png/
Pedro Barbosa Itil, Windows 2008 Server
------------------------------------
Reply:
Hello,
Please let me know which ones are RAID 1 and which ones are RAID 5. Put "user database directory" on RIAD 5. Put "User database log directory" and TempDB directories on RAID 1. Put backups on a separate drive, if you can.
Hope this helps.
Regards,
Alberto Morillo
SQLCoffee.com
------------------------------------
meaningless reply
- Split by Max Meng Thursday, August 30, 2012 1:23 AM Off-Topic
Dynamic Distribution Groups - Wish List Discussion
- Ability to select more then one OU to base the group on
- Ability to select and de-select recurs-ability per group specified
- Ability to see (through tool tip or some kind of report) through Outlook who the group e-mails
Reply:
You can do the first two by configuring your search criteria in PowerShell. As to the third, what you see in Outlook won't necessarily be what you get because the dynamic distribution group is just that. The distribution could change between the time you look at it in Outlook and the time the message reaches the hub transport server that is expanding the list, and Outlook could well be looking to a different domain controller than the hub transport server is.
You're welcome to send your thoughts to mswish@microsoft.com.
Ed Crowley MVP "There are seldom good technological solutions to behavioral problems."
------------------------------------
Windows Intune Exchange Connector Install Errors
I am trying to install the Windows Intune Exchange Connector, but am getting the following error. Anyone else having this problem or have a resolution?
Error:
"Your computer is running an operating system that is not supported by the Exchange Connector. For more information, see the Exchange Connector system requirements in the Windows Intune online help."
I read through all of the information and requirements, but that was not helpful.
Thanks!
Reply:
Hi Ross,
What OS is on the server you are trying to install on? Requirements are listed below in that link. (Windows Server 2008 R2 or Windows Server 2008 SP2 64bit)
http://onlinehelp.microsoft.com/en-us/windowsintune.latest/hh850746.aspx?sl=1
Thanks,
Jon L. - MSFT
------------------------------------
AD user templates showing in OAB
Hello -
I've created AD user templates for new user creations in Active Directory. For some reason these are now showing up in all of our Address book in Outlook. I did not create any mailbox in Exchange for these templates. How can I hide these templates from the OAB view? Please kindly advise.
Cheers -
DB
Reply:
Ed Crowley MVP "There are seldom good technological solutions to behavioral problems."
------------------------------------
Reply:
------------------------------------
Reply:
Ed Crowley MVP "There are seldom good technological solutions to behavioral problems."
------------------------------------
Does the last cumulative update/hotfix and service pack include all of the previously hotfixes including the current one?
Hello community
There have been alot of cumulative updates/hotfixes issued
for SharePoint 2010.
Can we just use the last cumulative update (in 2012) and know
that it will provide all of the hotfixes that have existed
previously as well as the current hotfix.
or
Do we have to install each hotfix that has come out for
SharePoint 2010?
Does the last service pack that is available apply to the last cumulative
update that has been issued even if they are not the same month and year?
Thank you
Shabeaut
Reply:
http://sharepoint.nauplius.net
------------------------------------
Installing an ODBC driver for Oralce in Excel 2010
I wanted to set up an ODBC to extract information from out Oracle tables. When I attempt the set it up through the ODBC Data Source Administrstor I get the following message:
The Oracle(tm) client and networking components were not found. These components are supplied by Oracle Corporation and are part of the Oracle Version 7.3 (or greater) client software installation. You will be unable to use this driver until these components have been installed.
Is there any that I can get this software so I can install the ODBC?
C# - Create XML with DOM Method
The following C# class creates an XML file with parents and childs.
public void xmlYarat() { XmlDocument doc = new XmlDocument(); XmlElement root; root = doc.CreateElement("XML"); doc.AppendChild(root); XmlElement sanat= doc.CreateElement("SANAT"); XmlElement album= doc.CreateElement("ALBUM"); XmlElement sanatci= doc.CreateElement("SANATCI"); XmlElement kaset= doc.CreateElement("KASET"); XmlElement fiyat= doc.CreateElement("FIYAT"); sanat.AppendChild(album); sanatci.InnerText = ""; kaset.InnerText = ""; fiyat.InnerText = ""; album.AppendChild(SANATCI); album.AppendChild(KASET); album.AppendChild(FIYAT); root.AppendChild(sanat); doc.Save("albumler.xml"); }
Melih Şimşek / Bilkent University
- Edited by Melih Şimşek Wednesday, August 29, 2012 7:33 PM
Deploying CU1 to new clients
With CU1 do you need to specify the hotfix in the client installations properties for PATCH=<path>? If you do specify it here, do you need to include the path to both x86 and x64 hotfixes?
What is the recommended way to deploy CU1 to new clients?
Reply:
Jason | http://blog.configmgrftw.com
------------------------------------
Reply:
I used this link to install CU1 to the client: http://myitforum.com/myitforumwp/2012/08/23/managing-configmgr-client-patching-using-the-new-cumulative-updates-servicing-model-and-adr/
SCUP infrastructure should be configured properly (GPO for domain clients, local policies for workgroup clients, certificates).
Keep in mind Microsoft specifically says the CU should be install if you are experiencing the issues described in KB.
Regards,
Alex Ignatenko | MCITP:Lync 2010, Messaging, Server 2008 | MCTS:UC Voice, Virtualisation, SCCM, SCOM, OCS | MCSE: Security
------------------------------------
multi point 2010 srcshell account deleted
srcshell account was deleted and now it is loggin in maintenance mode
is there a way to create the account and make it work on normal mode
i even tried to system restore but there were no restore points.
Reply:
------------------------------------
Windows Server 2008 R2 RDS and Skype
Hello!
While using Skype on RDS server I (and my users) saw enormous amount of errors, freezes and other types of bugs. Developers of Skype told that "this issue will be solved in future versions"... Skype grown from major version 3 to 5; Windows Server received SP1, SP2 and even Release 2, but nothing changed. I danced with a tambourine around the server, played with users' rights and permissions, Skype was added to DEP exclusion list... zero effect. At last, I reinstalled server with fresh W2K8 R2 and this did not help too.
...until one day I turn DEP off for non-system programs and services completely. It looks painful, but it is the only known way to run Skype (I use 5.1 now) on RDS without going insane because of it's crashes. If you find another less painy way to make it start and work constantly please share your knowledge :)
Valeriy Shevtsov, MCT
- Edited by Valeriy A Shevtsov Monday, February 14, 2011 4:32 PM
Reply:
Hi,
If the Skype works fine after you turn the DEP off, please try to add the Skype to the exception list on the RDS server.
You can prevent the DEP popup box while starting some specific application, please perform the following instructions.
Add the application to DEP list:
1. Click on Start, right-click on Computer, and then click on Properties.
2. On the Advanced system settings and then click on Advanced tab.
3. Click on Settings under Performance.
4. Click on Data Execution Prevention.
5. Click on Turn on DEP for all Programs and Services except those I select:
6. If you can see the program in the list, put a check mark on that if not click on
7. Otherwise, click on Add. Locate the path to the program's .exe file.
8. Click on Open.
9. Click on Apply. Click on OK twice.
10. Restart computer and test the issue again.
Alternatively, you can directly check "Turn on DEP for essential Windows programs and services only" on step 5.
For more details, you could refer to the following webpage.
Disable Data Execution Prevention (DEP)
http://vistasupport.mvps.org/disable_data_execution_prevention.htm
Run the application as Administrator:
1. Right-click the application shortcut on the desktop and click on Properties.
2. Under Shortcut Tab, click on Advanced.
3. Check the Run as administrator box.
4. Click on OK twice.
Hope this works.
------------------------------------
Reply:
Thanks for your reply.
I already tried
Skype was added to DEP exclusion list... zero effect.So the only options were to turn it only for system services or turn off at all. First one works.
Valeriy Shevtsov, MCT
------------------------------------
Reply:
Hi guys,
any other solution? I cannot start skype uder the user rights, under admin rights all fine.2008R2 a skype 5.3.xxxx
Thx
------------------------------------
Reply:
Valeriy Shevtsov, MCT
------------------------------------
Reply:
Dear Valeriy A Shevtsov, thanks for your advice, which I also helped solve the problem of running, but I used a slightly different path with the key "Skype.exe / datapath:% AppData% \ Skype \".Then the data is stored in the user profile folder.
Thanks again for your advice!
------------------------------------
Reply:
I tried with the newer version, but this one no works, i tried with Skype 5.3.0.108 and when I try login appear a message "Skype has stopped working"
I used a local administrator account to do the instalation.
- Edited by FernandoMC Wednesday, April 4, 2012 5:58 PM
------------------------------------
Reply:
I also used 5.3 version.
As far as I remember, even if you "preinstalled" Skype with admin account it still makes some modifications on first start under each new user. So you might point it to precreated /datapath to prevent it from trying to modify system folders which will fail definitely.
Valeriy Shevtsov, MCT
------------------------------------
Reply:
А ларчик посто окрывался.
Включаем "запустить программу в режиме совместимости", выбираем "win XP sp3" - ВСЁ
150 тестовых пусков, полёт нормальный, хрюша рулит ))
з.ы. а DEP в Windows 2008 R2 отключить нельзя.
Всем чмоки в этом чатике ))
A casket okryvalsya constant.
Turn on the "Run this program in compatibility mode for", select "win XP sp3" - ALL
150 test starts, normal flight, Piggy taxis))
ps and DEP in Windows 2008 R2 can not be disabled.
Smack in all chatike ))
------------------------------------
Exchange 2007 - Total Mailbox count
Hi Team,
I have a very peculiar issue where requirement is I have to present monthly report of mailbox counts on exchange server. Now issue is not how to fetch the data but all these figures are not in sync is what causing the issue.
For Example -
Total Mail box created in previous month -
Total Mailbox deleted in previous month -
I have many ways to get these above figures.
However, issue arises where Mailbox Count of say Aug is not equals to Mailbox Count of July + (Mailbox created - Mailbox deleted).
As this report is expected every month hence if somebody could explain me what am I missing here which is causing this difference in these figures.
I hope I am able to explain my concern.
Few command used to fetch this data -
# Get-MailboxServer | Get-Mailbox -ResultSize unlimited | measure-object
# Get-MailboxServer | Get-MailboxStatistics | where {$_.DisconnectDate -gt "8/2/2012"} | measure-object
# Get-MailboxServer | Get-Mailbox -resultsize unlimited | where {$_.whencreated -gt "8/1/2012"} | measure-object
Thanks, Pravin Sangwan | pravinsangwan@gmail.com
Reply:
Depending on what your deleted mailbox retention setting is, those disconnected mailboxes for the previous month may not all still be there to count.
The default is 30 days. If you run this on the first of every month, any mailboxes that got disconnected on the 1st of the previous month will have been purged by the time you run the report if the month had 31 days, and will not show up on your report.
[string](0..33|%{[char][int](46+("686552495351636652556262185355647068516270555358646562655775 0645570").substring(($_*2),2))})-replace " "
------------------------------------
Reply:
Hi,
You can change your deleted item retention setting, to hold disconnected mailboxes for longer than one month.
Regards,
Laeeq Qazi|Team Lead(Exchange + Sharepoint + BES + DynamicsCRM) www.HostingController.com
------------------------------------
Reply:
Hi,
Thanks Mjolinor and Laeeq,
I understand the retention period (which is 90 in our case) and time for Mailboxes to get purge actually. But somehow I am unable to sync my count. Hence I was thinking is it something which I don't know should also be taken into account?
However, Mjolinor.. How this command can help me in finding the miss?
Thanks, Pravin Sangwan | pravinsangwan@gmail.com
- Edited by Pravin Sangwan Wednesday, August 29, 2012 5:17 PM Spelling
------------------------------------
Reply:
I think at least part of your problem is that you're not actually counting mailbox creation and deletion events, but artifacts of those events that may not be reliable. A mailbox could get deleted and purged manually, or disconnected, then later re-connected to another account and then disconnected again (if the original disconnect happened in one month, and the second in another month, you'd end up counting it twice). There may be more ways this could go sideways I'm not thinking of right now, but I don't think this is a good method to audit the number of mailbox creations and deletions.
[string](0..33|%{[char][int](46+("686552495351636652556262185355647068516270555358646562655775 0645570").substring(($_*2),2))})-replace " "
------------------------------------
no support for demension 2400
- Changed type Arthur Xie Monday, August 27, 2012 7:01 AM
Reply:
Please remember to click "Mark as Answer" on the post that helps you, and to click "Unmark as Answer" if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. "
------------------------------------
Reply:
The newest BIOS update on the Dell page for that model is from 12/2003.
It has no high-speed graphics slots (AGP or PCI-Express); just PCI. Intel has no windows 7 drivers for its 845GV onboard graphics:
http://www.intel.com/support/graphics/sb/CS-030907.htm
The most recent OS that Dell officially supports for it is XP. That seems reasonable.
------------------------------------
Reply:
well as i said i got upgrades pci yes but still upgrades. radeon x1500- sound blaster card- sata usb connection- 1 gig ram- 160 gig hd. my specs arent holding windows 8 back its the stinking bios inability to allow the nt bit. i did however enable the pae but there is no setting for the nt bit. so the computer flags error 0x000005d and a list of parameters upon the restart of the install. before i post i better say it may be nx bit im thinkn of anyhow one of the 2
------------------------------------
Reply:
well as i said i got upgrades pci yes but still upgrades. radeon x1500- sound blaster card- sata usb connection- 1 gig ram- 160 gig hd. my specs arent holding windows 8 back its the stinking bios inability to allow the nt bit. i did however enable the pae but there is no setting for the nt bit. so the computer flags error 0x000005d and a list of parameters upon the restart of the install. before i post i better say it may be nx bit im thinkn of anyhow one of the 2
I'm not sure that any CPUs of that vintage (Socket 378) support the Execute Disable Bit. (Some call it NX, for no execute.) No BIOS update will change that.
If you're desperate to install Windows 8 on this old PC, you probably will have to hack it. I don't know whether that's practical.
------------------------------------
Visual Studio Performance Issues
I recently retired an old XP box and upgraded to a 64 bit Win7 PC (i3-2120 CPU @ 3.30 GHz) with 4 GB of ram. Much more machine than the old XP box which was running Visual Studio 2010 4.0.30319 RTMRel. I am now running on the new Win 7-64 box with Visual Studio 2010 4.0.30319 SP1Rel and it is horribly slow. I still have the old XP box and been able to run Visual Studio there to compare and it amazingly different. Much faster than the new machine.
I have done some research here on the forums but have not found anything conclusive other than a general consensus that VS is slow now. Also all the posts that I have found are from 2011 or older.
Is anybody aware of a solution or pending solution to this issue? Is it service pack1? Win 7? 64-Bit? The slowness does affect production.
Bradford W Brown
- Moved by Jack Zhai-MSFTMicrosoft contingent staff Monday, August 27, 2012 2:34 AM Not the VS debugger issue. (From:Visual Studio Debugger)
- Changed type Somebeach Thursday, August 30, 2012 4:26 PM no resolution
Reply:
Hi,
Thank you for posting in the MSDN forum.
Based on your description, it seems that it is not the VS debugger tool issue. Do you mean that you get this issue when you debug the same app in different windows?
As my understanding, many reasons could impact the running of the project, for example, the computer configuration, the project code and others. Since you using the VS in different Environments, so I'm afraid that you should check your Task Manager, close other processes, like the firewall, anti-virus software, and clean your computer and so on. Check it again.
As you said that it is slow when your run it in the Win 7-64 box, whether you have other PC with better configuration, you could try to run your app. You could debug your app with breakpoints, and check whether it is related to the specific code in the app.
You could use the Process Explorer tool to check what really delay your system.
As my understanding, some settings could impact the result when we debug the app. Maybe you could check your Symbol loading (Tool->options->debugging->symbols).
Not very sure whether you refer this blog about "Possible slowdowns under a debugger", if possible, you could check it, it provided the detailed information which could generate slow debugging.
Best Regards,
Jack Zhai [MSFT]
MSDN Community Support | Feedback to us
------------------------------------
Reply:
I agree that the "Debugger' forum is probably not the best place to have put this issue, I would have normally put it under a 'General Topics' forum, but one does not exist. The problem occurs with Visual Studio when starting, running, using the text editor, building, debugging, closing, et al.
Visual Studio now on the new computer just runs very slow. Sometimes better than others, but the build for example (of the same project as what was/is on the old XP box) probably takes 2-3 times as long as on the old PC. The computer is new, very little added to it except for MS Office 2010, so pretty clean. Everything else, other than Visual Studio, runs great. I have checked the task manager and because the PC has very little added to it, it is quite clean and shows very little in regards of overt resource consumption. I am just amazed how much better Visual Studio runs on my old XP box. Everything else (i.e. MS Office 2010 programs) run at least as well if not considerably better on the new PC.
If you could suggest a different and more appropriate forum, I would be happy to re-post there.
Regards...
Bradford W Brown
------------------------------------
Reply:
Hi,
Glad to receive your reply.
As my understanding, when the VS run slowly, we would check the following options:
- The PC configuration.
- The VS settings, see "Visual Studio 2010 Very Slow"
- The VS installing, see "Visual Studio 2010 SP1 Slow UI"
- Maybe other reasons like the more temporary files, see "Slow Visual Studio Performance … Solved"
- The project code and so on.
If we could make sure what the real reason is, I think it will be better to find a solution, that's why I suggest you use the process Monitor to check it.
Actually I'm not very sure which forum is better for this issue, but if still no help, since it is not the VS debugger issue. I am moving your question to the moderator forum ("Where is the forum for..?"). The owner of the forum will direct you to a right forum. Could I move it?
Best Regards,
Jack Zhai [MSFT]
MSDN Community Support | Feedback to us
------------------------------------
Reply:
Jack,
I greatly appreciate you taking the time for this issue. I was hoping since this was a previously identified problem that there was a very conclusive resolution. I will have to work at this as I can. It is not unusable, just not meeting my expectations with the more robust PC. Being a small business owner, time is precious and I will investigate the links and try different resolutions including trouble shooting with the process monitor, as I can.
If you would like to move this to "where is the forum for..?", please feel free...
Regards,
B. Brown
Bradford W Brown
------------------------------------
outlook 2010
blank mail show in outlook 2010
Reply:
------------------------------------
No comments:
Post a Comment