Language Pack woes when adding a server to farm
I have a SharePoint farm with one WFE (Windows Server 2008 R2, SharePoint Server 2010) and one database back-end (Windows Server 2008, Microsoft SQL Server 2008).
I want to add another SharePoint Server 2010 as an application server.
When I walk through the SharePoint Products Configuration Wizard cannot go past "Server Farm Product and Patch Status" page, because there are language pack files that are not installed. However, my language pack is installed on both servers; in Control Panel, I can see that the same products are installed on both computers.
More info:
In Server Farm Products and Patch Status, it says that "Language Pack for SharePoint [etc] - [My language]" has status "Installed Across Server Farm". Then there is a long list of more or less obscure files that is "Missing on [other server]", like "Microsoft Office Server Proof ([my language]) 2010 ([version number])". I cannot install such files on the other server, because it says that there are no such product installed.
- Changed type Qiao Wei Sunday, September 9, 2012 2:57 PM
Reply:
Hi Jazzmanvibration,
When trying to run the SharePoint Products Configuration Wizard , the wizard was complaining about missing language packs and the CU files, which you confirm had been installed properly and there before installing the CU. To fix this, you could force PSConfig through PowerShell – avoiding the GUI – and it worked like a charm!
psconfig.exe -cmd installcheck -noinstallcheck
In order to properly install these items, you should better do thins in the following order
- SharePoint 2010 RTM + SP1 (slipstreamed)
- Configure Farm using PowerShell
- Office Web Apps RTM + SP1 (slipstreamed)
- Run SharePoint Config Wizard (PSConfig) on all severs
- SharePoint 2010 Server Language Pack RTM + SP1 (slipstreamed)
- Run SharePoint Config Wizard (PSConfig) on all servers
- Install OCT 2011 CU (or current recommended CU)
- Run SharePoint Config Wizard (PSConfig) on all servers (if you get errors here, so additional note below)
------------------------------------
Reply:
Thank you. I'm not quite sure how to use the psconfig command. If I run it, it runs successfully, but then what? There's no difference afterwards, if I run the SharePoint Products Configuration Wizard, which I must do to install SharePoint nonetheless.
Right now, what I'm working with, is that "Microsoft SharePoint Foundation 2010 1033 Lang Pack Core (14.0.6029.1000)" is "Missing on [first server]". When I install language packs (English) (or Service Pack for language pack) on first server says it is already installed.
So the configuration guide says I need to install this and that file, but the servers says it is already installed. Therefore a "-noinstallcheck" seems interesting, but I don't know how to use it.
What is missing on the second server is "Microsoft SharePoint Portal English Language Pack", but good luck googling for that package. -- The whole process is slightly ridiculous.
- Edited by Jazzmanvibratio Wednesday, August 29, 2012 8:01 AM
------------------------------------
Reply:
------------------------------------
Need ability to remove approvers from In Progress approval workflow
Hi,
We have customized OOB approval workflow in the Sharepoint Designer in order to change the email layout and text. We also have a need for the below mentioned.
- We need the ability to remove approvers after the workflow has started (In progress) perhaps delete their task and still let the workflow complete with results from rest of the approvers. I wanted to know if this is something that could be achieved using Sharepoint designer. If so, then any pointers would be very helpful.
- When approver opens their task "Delete Item" link appears on top of the dialog/page. Need to remove the "Delete Item" link which appears on top in the workflow task dialog/page.
Thanks.
Reply:
Hi
Still trying to find out how to achieve this... Anyone has any thoughts...
Thanks.
------------------------------------
Suggestion: ability to mark thread as "un-read"
I often filter my view of a particular forum to just the unread posts.
Occasionally, I'll come across a question that I'd like to return to later, but don't have time to respond to right now. It would be great if there was a "mark as unread" button, much like there is in email.
Is this the right place for logging this suggestion, and would others find such feature useful?
Reply:
I keep very few threads in "My Alert". If I wanted to "bookmark" a thread, I click "Alert Me" to add it to "My Alert".
Since all later replies to these threads will generate new alert to your mailbox, you'll want to keep the number of threads as low as possible, or just don't fill the "alert email" address in the "My Settings" page.
------------------------------------
Reply:
I often filter my view of a particular forum to just the unread posts.
Occasionally, I'll come across a question that I'd like to return to later, but don't have time to respond to right now. It would be great if there was a "mark as unread" button, much like there is in email.
Is this the right place for logging this suggestion, and would others find such feature useful?
Hi,
If u've used your Micrsoft's email to order issues, when someone replies u can get the letter in outlook, ur email box……， where there's a un-read state or read state.
And in fact I think u can click "Alert me" on the left corner of the cetain issues, thus u can remember that:D
But urs is also a nice idea！！！！！！！！！！！！！
- Edited by ThankfulHeart Thursday, August 30, 2012 8:41 AM
------------------------------------
Reply:
It will be nice to be able to save some threads in 'My Saved Threads' and be able to also add subfolders to that folder. I suggested this a while ago, but I don't think this was ever considered.
Also, I am afraid that this forum is not really monitored by the people who work on forum's design.
For every expert, there is an equal and opposite expert. - Becker's Law
My blog
------------------------------------
Lync 2010 SE : Ability to report on volume of IM sent and recieved per user
Hi Team,
I have successfully installed Lync Reporting and Archving. However I want to be able to see volume of IM's sent/recieved per user. (or even group per 'location' based on subnet)
I found this blog for OCR (http://blogs.technet.com/b/jitreddy/archive/2008/07/31/archiving-cdr-reporter-tool-and-custom-sql-queries.aspx) but wondered if there was anything for Lync 2010 specifically.
I have looked through the existing reporting dashboard fro Lync but they don't give the info I am after. eg:
- User Registration Report
- Peer-to-Peer Activity Summary Report
Thoughts? - many thanks
Reply:
There is no standard report that will provide the information you need in terms of group by location. Howeve, all of the data is there so you just need to write a custom SQL query or report.
As for the volume of IMs per user you should be able to use the User Activity Report and filter by Activity Type (Peer-to-Peer) and Modality (Instant Messaging). Of course this really only works for a small number of users. If you want to do it across a lot of users then you are back to a custom SQL query.
------------------------------------
Reply:
Hi Alanmad,
Thanks for the reply. You wouldn't happen to have a script that does something like this? - I can ask our developers for one but not sure where to start.
Many thanks
------------------------------------
Issue in connecting Performance Point Dashboard Designer with the Sharepoint server
Hi all,
i am facing the error " the URL IS NOT AVAILABLE, DOES NOT REFERENCE TO A SHAREPOINT SITE OR YOU DO NOT HAVE PERMISSIONS TO CONNECT TO THE SERVER" while connecting the Performance Point Dashboard Designer with Sharepoint server .
can anybody help me out please.
Reply:
Have you configured the Performance Point service application in SharePoint central admin along with secure store service? If no, start here:
Configure PerformancePoint Services
http://dailyitsolutions.blogspot.com/
------------------------------------
Reply:
Can you provide some more details as to what steps you are taking to get this message and what you are trying to do?
Are you trying to open up an existing workspace file and connect to a different server?
------------------------------------
Reply:
------------------------------------
CRM2011 - Owner of this queue does not have sufficient privileges to work with this queue
Using CRM2011 and Outlook 2010 with CRM interface.
When I try to Track and Email to an Opportunity etc. I get the error message
"The owner of this queue does not have sufficient privileges to work with this queue"???
How, as the owner of the queue can i not have the privileges to work with the queue - that i own?
MK
Reply:
------------------------------------
Reply:
Have a look at this blog which I think will answer the issue you are having
------------------------------------
Reply:
------------------------------------
how to create connected webparts using all oob features
i want to create a new sharepoint page
then i need to create connected webparts using oob all features
a. on selection of contacts it show all documents
b. in which ddepartment he belongs to
c. and his own full details
how can i do this?
Reply:
Hello there,
Could you please maybe break each of those points (a, b, c) into a bit more detail. For working with connected web parts you can use the following to get the basics: http://office.microsoft.com/en-us/sharepoint-server-help/connect-data-in-web-parts-HA101785157.aspx?CTT=1
------------------------------------
Reply:
for connected webparts refer below link.
------------------------------------
Split for format
用户A用outlook2007邮件密送给B，收件人为空
B收到邮件显示：
发件人和收件人都为A，这是什么原因（正常应该收件人为空）？
如何解决？（最好有详细步骤
谢谢！
exchang server 为 2010sp1
- Split by Max Meng Friday, August 31, 2012 1:45 AM Split for format
the account is not authorized to log in from this station
Im sure ive just missed a blatantly obvious step but ive been trying to join a win 7 pro notebook with a logon server 2000 domain. i've set the dns and wins addresses then I tried to change to the domain via computer name change. when it asks for my credentials i enter the admin account and password for the server admin but it keeps saying "the account is not authorized to log in from this station" is this a server config error or is there something locally I can try other than the obvious local security policies which I've already been through. Please help!
I just finished going through regedit and changing lanmanworkstation and 'server enablesecuritysignature values to 0 and still not working... is a server reboot necessary?
- Edited by darkcitycorp Wednesday, August 29, 2012 12:58 PM
Reply:
Hi,
Please check the issue referring to the methods in the following Knowledge Base article:
Error Message: The Account Is Not Authorized to Login from This Station
http://support.microsoft.com/kb/281648
Hope this helps
Your Name
TechNet Community Support
------------------------------------
Change cursor?
I would like to have the company logo either as the cursor or following the cursor around the screen. Could you point me in the direction of how to do this?
Thanks in advance.
Reply:
I guess you could add up a Content Editor WebPart and ADD the script to that in the page.
SharePoint Specialist
MCTS
Blog : http://www.onlineasp.net
Twitter : https://twitter.com/TalibAliKhan
LinkedIn: http://sa.linkedin.com/in/talibalikhan
------------------------------------
Reply:
------------------------------------
VMware to Hyper-V Convertion using VMM 2012
Are there any further settings available in VMM 2012 which can fasten the process of converting the VM from VMware host to Hyper-V as it seems to take quite along time.
In our environment it usually takes 12-15 Hours for a VM with 100 GB disk .
Please advice.
Help required regarding the Windows system image manager
Hi ,
Can anyone help me .
I need to learn about the different components and the packages iside the windows 7 image while we using inside the "Windows System Image Manager" for unattended answer file.
I need to learn the whole about the components and the use of the components.
-$aran-
Reply:
Open up your 'unattend.chm' in the Docs directory. Every component is detailed. It is the best resource available.
Afterwords pop over to MSFN.org unattend forum and have a look at the 'Ask your Seven XML here' sticky for some do's and don't's in automating via XML files.
http://www.msfn.org/board/forum/167-unattended-windows-7server-2008r2/
Don't forget to mark your posts as answered so they drop off the unanswered post filter.
- Edited by Knuckle-Dragger Thursday, August 30, 2012 8:31 AM
------------------------------------
heb geen service meer
Reply:
Hi,
Please understand here is English forum. Please describe the issue in English. Thanks for your understanding.
Niki Han
TechNet Community Support
------------------------------------
Network Summary Dashboard To Be Fixed in OM 2012 SP1
If anyone else is getting timeouts on the built in Network Summary performance dashboard I was officially told today by Microsoft that it would be fixed in OM 2012 SP1.
I have 150+ devices, the dashboard would not run at all.
Opened Premier case and got the news finally today that its a known issue.
Reply:
Is anyone able to display this dashboard?
Anyone?
Ferris?
:)
------------------------------------
Reply:
- Edited by Vladimir Zelenov Friday, May 25, 2012 7:31 AM
------------------------------------
Reply:
------------------------------------
Microsoft Fresh Paint for Windows 8 is awesome – Really!
I grabbed this & have mucked about w/ it & it is, indeed, super cool!
Drew MS Partner / MS Beta Tester / Pres. Computer Issues Pres. Computer Issues www.drewsci.com
Samsung unveils first new Windows (8) Phone
Drew MS Partner / MS Beta Tester / Pres. Computer Issues Pres. Computer Issues www.drewsci.com
Computer security experts warn about Java
http://tech.ca.msn.com/computer-security-experts-warn-about-java
Cheers,
Drew
I couldn't decide where to put this so, here it is...
Drew MS Partner / MS Beta Tester / Pres. Computer Issues Pres. Computer Issues www.drewsci.com
- Changed type Drew1903 Wednesday, August 29, 2012 4:59 AM
Reply:
Hi,
Thank you for your sharing. We should keep paying attention to avoid the security problem.
Kim Zhou
TechNet Community Support
------------------------------------
Reply:
& please mark as "Helpful".
Thanks for expressing your appreciation.
Drew MS Partner / MS Beta Tester / Pres. Computer Issues Pres. Computer Issues www.drewsci.com
------------------------------------
0x80042109 error
Reply:
which email account is configured in your outlook?
Make sure, the SMTP port number is correctly configured on More settings
------------------------------------
Reply:
Hi,
Please verify this error message:
Task 'SMTP server name - Sending and Receiving' reported error (0x80042109): 'Outlook is unable to connect to your outgoing (SMTP) e-mail server. If you continue to receive this message, contact the server administrator or Internet service provider (ISP).'
You can follow the methods in this KB troubleshoot this problem:
http://support.microsoft.com/kb/813514
Best regards.
William Zhou
TechNet Community Support
------------------------------------
Launchpad Client Windows 8 Warning Message
Hi,
i installed Windows Server 2012 RC Essentials and a Windows 8 Pro Client
i had add the client on the Server with the connector, all work .
but i have a Warning with the integrity check :DeviceProviderReporting!DomainJoinStatusInfo
do yo know how i can resolve this ?
thx
- Changed type Sean Zhu - Wednesday, September 5, 2012 6:30 AM
- Changed type Sean Zhu - Wednesday, September 5, 2012 6:31 AM
Reply:
Sean Zhu
TechNet Community Support
------------------------------------
Application Catalog best practices
I am setting up the application catalog, but I want to make sure it's done right the first time. I definitely did not want to install it somewhere that it shouldn't be installed.
My environment looks like this;
1 Primary Site Server
1 WSUS server
1 SQL server
1 SQL Reporting server
27 distribution points
1 management point (part of a distribution point, outside of primary site system server)
Should the application catalog get it's own server, or should there be no problem including it on an existing server?
- Moved by Joyce Wang [MSFT]Microsoft employee Friday, August 31, 2012 5:12 PM (From:Configuration Manager 2012 - General)
Reply:
Please refer Configuring the Application Catalog and Software Center in Configuration Manager
------------------------------------
Reply:
Jason | http://blog.configmgrftw.com
------------------------------------
Reply:
------------------------------------
Reply:
------------------------------------
Reply:
Adding to what Jason mentioned, you should also consider the expected traffic for each of the components and site roles using IIS, including the Application Catalog. If you expect large amounts of traffic for any of the components/roles, you should consider using separate servers.
------------------------------------
Reply:
Anoop C Nair - @anoopmannur :: MY Site: www.AnoopCNair.com :: FaceBook: ConfigMgr(SCCM) Page :: Linkedin: Linkedin<
------------------------------------
No comments:
Post a Comment