Tuesday, February 1, 2022

[Forum FAQ]How to do Sysprep in Windows 10 Insider Preview Build 10130

Symptom:

Someone may would like to Sysprep Windows 10 Insider Preview Build 10130 for a test. However, when they run Sysprep in Windows 10 Insider Preview Build 10130, they may find that an error message pops out saying that:

A fatal error occurred while trying to Sysprep the machine.

Then check the Sysprep setupact.txt log, we could find the logged error saying this:

SYSPRP Encountered error 0x80070020 while deleting contents of package repository. Another process, likely Windows Installer service, is accessing the files inside

'C:\ProgramData\Microsoft\Windows\AppRepository'.

Try stopping the Windows Installer service and ensure that no other process is accessing files inside this directory before retrying [gle=0x00000012]

'C:\ProgramData\Microsoft\Windows\AppRepository'. This folder is used for storing the information about Windows Store Apps, as we may find out, a newly created in Windows 10 Insider Preview Build 10130, there would be some Windows Store Apps still under the downloading/installing process when we logon the first time.

Which I suspect should be root cause of this issue here.

Workaround:

So in the current situation, if we would like to run Sysprep successfully on the newly created Windows 10 Insider Preview Build 10130 machine, we need to wait until the Apps finishing their installation, then we can run the Sysprep with the built-in admin account.

If Sysprep fails with the above error, then please wait for another hours.

The first time I failed sysprep, and the next day when I run the sysprep under C:\Windows\system32\sysprep, and select the generalize option, it failed a second time, but with a different error message:

[0x0f00ae] SYSPRP WinMain:Hit failure while processing sysprep cleanup external providers; hr = 0x8007001f

See the picture for this error:

Then I open registry and find the following archive:
HKEY_LOCAL_MACHINE\SYSTEM\Setup\Status\SysprepStatus

Chnage the value of GeneralizationState from 3 to 7, then run the Sysprep again.

This time Sysprep finished and the machine reboot successfully.

Please click to vote if the post helps you. This can be beneficial to other community members reading the thread.

Upcoming changes to Windows 10 Insider Preview builds

*** Upcoming changes to Windows 10 Insider Preview builds ***

Carey Frisch

Reply:

---> Upcoming changes to Windows 10 Insider Preview builds [UPDATED 6/22]

Carey Frisch

------------------------------------

How can we get Windows 10? : Upcoming changes to Windows 10 Insider Preview builds [UPDATED 6/22]

How can we get Windows 10?
Upcoming changes to Windows 10 Insider Preview builds [UPDATED 6/22]

Edited by Ashidacchi Monday, June 22, 2015 10:00 PM
Changed type Ashidacchi Monday, June 22, 2015 11:36 PM

Reply:

You can either join the insider program now or wait until win 10 is released on July 29. All qualifying OS'S should start being updated via windows update then

http://windows.microsoft.com/en-ca/windows/preview-faq

Win 10 FAQS

http://www.microsoft.com/en-us/windows/windows-10-faq

Win 10 features

http://www.microsoft.com/en-us/windows/features

Win 10 Specs

http://www.microsoft.com/en-us/windows/windows-10-specifications

How to upgrade

http://www.microsoft.com/en-us/windows/windows-10-upgrade

Wanikiya and Dyami--Team Zigzag

Edited by ZigZag3143xModerator Monday, June 22, 2015 11:07 PM

------------------------------------
Reply:

How can we get Windows 10?
Upcoming changes to Windows 10 Insider Preview builds [UPDATED 6/22]

Aschidacchi Hokusosha,

You posted a recent Blogging Windows.
Your intention is to inform members of the new blog.
I am sure your intention is NOT to ask question and you were not asking for help.

Therefore, you should change the Type category from Question to Discussion.

How to change type?
May be my 2 screenshots will explain adequately.

Edited by david hk129 Tuesday, June 23, 2015 12:52 AM

------------------------------------
Reply:

Hi ZigZag3143x,

Thank you for the comment. I'm already joining Insider Program, and using Windows 10(10130) on several machines(physical and virtual), waiting for 29 July.

Best regards,

------------------------------------
Reply:

Hi david hk129,

Thanks a lot. and sorry for my mistake. I'v changed the thread type to "General discussion".

Best regards,

------------------------------------
Reply:

Happy to help & good luck

Wanikiya and Dyami--Team Zigzag

------------------------------------
Reply:

Hi david hk129,

Thanks a lot. and sorry for my mistake. I'v changed the thread type to "General discussion".

Best regards,

Nobody was born and knew everything.

As long as you know now, that's good enough.

------------------------------------

Who I can, insert sentence for to AWK

Hi, I need put insert a for sentece in this AWK command, Tks

for (i = 1; i <= NF; i++)

awk '$i == "14" { sum += $3 } END { print "Cajica "$i " "sum }' testlog.out

Changed type Bill_Stewart Sunday, July 19, 2015 10:40 PM
Moved by Bill_Stewart Sunday, July 19, 2015 10:40 PM Abandoned drive-by question

Reply:

Since we don't know awk, what is the input data, and what should the output look like?

-- Bill Stewart [Bill_Stewart]

------------------------------------
Reply:

This is the second "can someone rewrite this awk code as PowerShell for me" question where we have requested further information.

What is the input data, and what should the output look like?

-- Bill Stewart [Bill_Stewart]

------------------------------------

Power BI Page Size should be left for user to decide

There are many use cases where report elements do not fit into the current size of Power BI single page, not having cross page filters is making it worse. Why can't we leave Page size open for end user / designer to decide.

Thanks,

Nasir

Reply:

Hi Nasir,

The best place to provide this feedback would be here: https://support.powerbi.com/forums/265200-power-bi. If you create a suggestion there, others can vote on it and it will be more visible to the Power BI team.

Regards,

Michael Amadi

Please use the 'Mark as answer' link to mark a post that answers your question. If you find a reply helpful, please remember to vote it as helpful :)

Website: http://www.nimblelearn.com, Twitter: @nimblelearn

------------------------------------

techpowerup moderator human experiment

http://www.techpowerup.com/forums/threads/lower-clocked-i5-faster-than-higher-clocked-i7-with-280x.213559/#post-3299766

yeah thats me xfia that screwed up at first reading fast.

is this not a joke? a few days ago there was someone that had a issue and i said how it was impossible to figure out with out the right diagnostic tools but people where insistent it was whatever so i just finished with saying they might actually get to the bottom of it at technet.

iron8orn AMD FX 6350@4.4ghz on MSI 970A-G46 8gb ram cas 8 1600mhz cpu-nb 2400mhz MSI hd7850x2 ht-link 2400mhz

Moved by Just Karl Monday, June 22, 2015 2:37 PM Off-Topic
Changed type ZigZag3143x Monday, June 22, 2015 2:58 PM Not a question in sight

Reply:

surprised you didnt delete this yet lol must be interested..

well idk what they are thinking over there but there has been so many misleading articles there.

most recent was criticizing amd's ceo for saying the r9 nano will be perfect for living room small form factors because it doesn't have hdmi 2.0 yet the 3 displayports that the fury gpu's have are perfect for anyone due to being enabled to transfer hdmi2.0 via cheap adapter and gives way more bandwidth as im sure you guys know around here means no subsampling for 4:4:4 at 4k 60hz and what you need for 5k along with alot of smaller resolution displays.

iron8orn AMD FX 6350@4.4ghz on MSI 970A-G46 8gb ram cas 8 1600mhz cpu-nb 2400mhz MSI hd7850x2 ht-link 2400mhz

Edited by 1ron8orn Friday, June 19, 2015 10:02 PM

------------------------------------
Reply:

Hello,

Since your post is off-topic, I am moving it to the off topic forum.

Karl

When you see answers and helpful posts, please click Vote As Helpful, Propose As Answer, and/or Mark As Answer.
My Blog: Unlock PowerShell
My Book: Windows PowerShell 2.0 Bible
My E-mail: -join('6D73646E5F6B61726C406F75746C6F6F6B2E636F6D'-split'(?<=\G.{2})'|%{if($_){[char][int]"0x$_"}})

------------------------------------
Reply:

Hello,

I haven't deleted it yet because I am still trying to figure out what in the world you are talking about ;)

Karl

------------------------------------
Reply:

i thought it was a serious joke about some of things the mods are saying or a experiment with trouble shooting but its not..

they are highly cynical and have not listened to anything that the people that actually make technology are trying to tell them in years.

one article is just how important is gpu memory bandwidth and they say the measurements might be wrong for starters. like why is there compression now on shorter memory bus and why have they made hbm? it really doesnt take a scientist or engineer to see trends and what they mean.. especially when you can watch videos made simple enough like the discovery channel that a kid could start learning.

well i would like to say very nice job on the multi threaded command buffer and async shaders from what i have seen if you or anyone you know worked(ing) on them.

its almost baffling how many just cant grasp what it all means.

iron8orn AMD FX 6350@4.4ghz on MSI 970A-G46 8gb ram cas 8 1600mhz cpu-nb 2400mhz MSI hd7850x2 ht-link 2400mhz

Edited by 1ron8orn Monday, June 22, 2015 6:24 PM

------------------------------------

Exchange 2013 - EML files missing attachments when not running in cached exchange mode.

Hi,

We have recently upgraded from Exchange 2010 to Exchange 2013. Since the migration we have had issues with our archiving system. Bascially the archiving system creates .eml files types

When Outlook is running in non-cached exchange mode any attachments within these .eml files are missing when the eml file is opened. If you change Outlook to run on cached mode the attachments show up fine.

It's almost identical to the following issue;

http: // social.technet.microsoft.com/Forums/office/en-US/b9a390a9-e014-4098-ad6e-dd377a53422a/office-2010-exchange-2010-attachments-in-emlemails-are-invisible?forum=outlook

Except for the Exchange version this is exactly what is happening to us. Is anyone aware of whether the same issue fixed in Rollup update 5 for Exch 2010 SP1 is present in Exchange 2013?

Reply:

What version of Exchange 2013 are you running?

Hope this helps. Please remember to click "Mark as Answer" on the post that helps you, and to click "Unmark as Answer" if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

------------------------------------

shared sever vs dedicated server

I am software developer .

need to know about server administration

my applications on shared server

they taking time to load

some applications capturing data runtime but due to loading time data loss happens

should i go for dedicated serer

Get more time to execute sql query when field has 50 kb string

When I run the SQL script (SELECT Column1 FROM Table1) it takes more time (approximately 25-30 seconds) to execute a query.

Column1 data type : NVARCHAR(MAX)

Column1 data size : 50.2 kb

Can any one explain the reason for this long execution time?

Edited by LT_Aravindh Monday, June 22, 2015 12:19 PM

Reply:

Could take time to fetch all the rows from disk, or it could be blocking, ....

You can see for yourself by

SET STATISTICS IO ON

SET STATISTICS TIME ON

before running the query in SSMS. Then you will see messages about the resources used by the query.

David

David http://blogs.msdn.com/b/dbrowne/

------------------------------------

A solution for systems management

If you are evaluating new systems management solutions, check out this blog post that includes a research paper conducted by Enterprise Management Associates, Inc. (EMA) and evaluates four of the most popular lifecycle management solutions, including:
- Dell KACE K1000 Systems Management and K2000 Systems Deployment Appliances
- LANDESK Management Suite 9.6 SP1
- Microsoft System Center 2012 R2 Configuration Manager (SCCM)
- Symantec Altiris Client Management Suite (CMS) 7.5 SP1
http://en.community.dell.com/techcenter/b/techcenter/archive/2015/03/16/why-do-you-need-a-systems-management-solution-and-which-one-is-the-best-for-you-new-white-paper-from-ema-has-the-answers

Moved by Just Karl Monday, June 22, 2015 2:42 PM Off-Topic
Changed type ZigZag3143x Monday, June 22, 2015 2:57 PM Not a question in sight

Reply:

Hello,

The TechNet Wiki Forum is a place for the TechNet Wiki Community to engage, question, organize, debate, help, influence and foster the TechNet Wiki content, platform and Community.

Please note that this forum exists to discuss TechNet Wiki as a technology/application.

Since your post is off-topic, I am moving it to the off topic forum.

Karl

------------------------------------

how to find wireless in windows

i want to know how can i find wireless in window 7 home basic i am try but there is no option i am serched my system management and administration but i am not found any option wireless network connection so can you find this for me

thank you

vinod

Moved by Just Karl Monday, June 22, 2015 2:40 PM Looking for the proper forum.

Reply:

What os you are using?, Is it a Laptop or Desktop?. You can find your wireless adapter by going to start ->run(Windows key+r) type "ncpa.cpl"

------------------------------------
Reply:

i want to know how can i find wireless in window 7 home basic i am try but there is no option i am serched my system management and administration but i am not found any option wireless network connection so can you find this for me

thank you

vinod

Hi,

Please refer this Microsoft document fir setting up a wireless network - http://windows.microsoft.com/en-us/windows/setting-wireless-network#1TC=windows-7

------------------------------------
Reply:

not find no problem can guide can i get wireless in window 10

------------------------------------
Reply:

not find no problem can guide can i get wireless in window 10

------------------------------------
Reply:

Hello,

I'd ask in the Windows 7 forum on Microsoft Community.

As the Microsoft Community is on a different platform, we cannot move the question for you.

Once there, click on Participate near the top of the screen, and select 'Ask a Question' or 'Start a Discussion':

Karl

------------------------------------
Reply:

Hello,

The Windows Desktop Perfmon and Diagnostic tools forum is to discuss performance monitor (perfmon), resource monitor (resmon), and task manager, focusing on HOW-TO, Errors/Problems, and usage scenarios.

As the question is off topic here, I am moving it to the Where is the Forum... forum.

Karl

------------------------------------

Good & helpful practices

Thought this was interesting... 1 because of where it was found, 2 because it is not full of BS or trying to sell some junk 3 some want to be negative about CCleaner yet... 4 some want to bash Windows Defender yet...

Anyway, check THIS out, sometime.

Cheers,
Drew
Name: th3.jpg Views: 0 Size: 3.3 KB

Drew MS Partner / MS Beta Tester / Pres. Computer Issues Pres. Computer Issues www.drewsci.com

Moved by Just Karl Monday, June 22, 2015 2:35 PM Off-Topic

Reply:

Hello,

Since your post is off-topic, I am moving it to the off topic forum.

Karl

Edited by Just Karl Monday, June 22, 2015 2:35 PM

------------------------------------

The handle is invalid

I have a network drive that have been joined to my domain. I receive "The handle is invalid" anytime I try to access it through the UNC eg. \\netdrive but this same UNC works for the computers that are not joined to the domain.

Ping responds alright from the server and domain computers but a UNC connection to it simply does not work.

I wonder where the problem is actually coming from, will it have something to do with Windows server 2012 or Windows 7 Pro.

See a link to screenshots of the problem.

https://onedrive.live.com/view.aspx?resid=4B65B918A72B3C69!1844&ithint=file%2cpdf&app=WordPdf&authkey=!AHgMrcK-48pa5lo

Please can anyone help me with solution?

Thanks,

Harrison.

Changed type Vivian_Wang Monday, June 29, 2015 10:30 AM
Moved by StevenGravesMicrosoft employee Friday, July 31, 2015 4:23 PM Wrong forum

Reply:

Hello! This forum is meant for questions and discussion about the Windows Server Technical Preview. There are separate forums for 2012 questions, and for Win 7 questions. I would start with the 2012 forum, here:

https://social.technet.microsoft.com/Forums/windowsserver/en-US/home?forum=WinServerPreview%2Cwinserver8gen&filter=alltypes&sort=lastpostdesc

Thank you!
Jess Cunningham
Windows Beta Support Team

------------------------------------

Updating App-V apps deployed by SCCM

Hi,

If I use SCCM 2012 to deploy my sequenced packages, using download and execute (no streaming from distribution points) method I understand that the package will be downloaded to the local SCCM cache and when a user launches the app the App-V client copes the content into the App-V cache.

What happens when I update the package on the SCCM server? If I create a new deployment for the updated package will the whole thing download to the SCCM cache? I am looking for a method of only downloading the differences if possible (I know this would probably be a lot easier if I choose streaming instead of download and execute!).

Any ideas?

Thanks

Reply:

OK so I think I found the answer but have not had the chance to test yet but I believe this is the answer:

Remote Differential Compression (RDC) is a data transfer method that optimizes data transmission over the network. Configuration Manager uses RDC to send only the portions of files that have changed to clients when virtual application package content is updated. The Configuration Manager Client uses RDC to build a new version of a virtual application package based on the current version of the package and the changes that are sent to the client.

Taken from Virtual Application Management with Microsoft Application Virtualization 4.5/4.6 and System Center Configuration Manager 2007 R2 whitepaper but I believe it is still valid for App-V 5.

Anyone have any experience using RDC?

------------------------------------
Reply:

I'm presuming you upgrade you're existing package in the App-V sequencer and are then adding that new package into SCCM and using the supersedence option? You can also retire the old package which will remove the files from the SCCM cache on its next deletion cycle.

When you create a new deployment in SCCM, for you're upgraded package, it will download those package files in full (download and execute) into the SCCM cache. At this point SCCM client will attempt to Add/Mount and Publish this package; depending on whether its targeted at a user or computer collection. It's only at this point will the App-V client determine if its an upgrade at which time if will perform a differential (delta) upgrade.

It uses RDC when you are just updating the content for an existing package i.e. modifying the dynamic configuration files.

If disk space is a limiting factor for you then you should look at using the "stream content from DP" in conjunction with the Shared Content Store.

Here is a blog by Thamim Karmin that you might find useful.

------------------------------------

my computer has blue screen and restarted without my order

How do you interpret this.........

Microsoft U-turns on 'free' Windows 10 upgrade promise for ALL previewers

Source

English is not my first language and I am having trouble interpreting the article.

Bottom line :

I have Microsoft account connected to ALL my computers running Windows OS.

I am dual booting Win 8.1 Pro with Insider Preview build 10130.

Needless to say, my Insider preview was a clean install on a separate partition.

Now, besides getting a free upgrade from my Win 8.1 Pro, do I also get a free Win 10 RTM out of my Insider Preview ?

I have been maintaining that only my Win 8.1 Pro will get a free upgrade, but not my Insider Preview.
Seems to me Gabriel Aul's recent clarification is pointing to that .

Edited by david hk129 Monday, June 22, 2015 1:57 PM

Reply:

You know, as I had said before in other thread, I'll wait for July 29th and find out the REAL answer.

------------------------------------
Reply:

There has been plenty of speculation on this, but according to the official Q&As it is still a full version - not a trial or introductory version.

https://www.microsoft.com/en-us/windows/windows-10-faq

Under "Is the upgrade really free?"

1. Nobody says it will be a trial version. Anyone who has gone this far knows that.

2. That FAQ does not answer my question.

------------------------------------

Manage Your Organization in ecp does nothing

I'm trying to create a Role group that only lets users modify the existing AGL. Specifically, the members will need to mark old users as Hidden, but I know I can't get that granularity. I have created a Role Groupe called AddressMgr with Addree List Role, the scope of domain.com, and added the users to it.

I'm kind of new at this, and know I'm missing something important here. The users can loginto ecp, but when the try to open Manage Your Organization, nothing happens. What am I missing?

Thanks

Reply:

Hi,

When you say nothing happens, what you mean by that? Can you elaborate more on it?

Gulab Prasad,
MCITP: Exchange Server 2010 | MCITP: Exchange Server 2007
MCITP: Lync Server 2010 | MCITP: Windows Server 2008
My Blog | Z-Hire Employee Provisioning App
Skype: Exchange.Ranger

------------------------------------
Reply:

If I, who has full rights to everything, clicks on the link in Options in owa, then See All Options, it takes me to the ecp. In there I see all Mailboxes, Users and Groups, etc. If one of my users in the AddressMgt group does the exact same thing, when they click on Manage Your Organization, it's as if they clicked on no link at all. It does nothing. Other links in the right panel work, but not that one. I think I have omitted a step in granting them access to this.

This is an on-site Exchange, btw.

Edited by LonesomeDove Saturday, January 28, 2012 4:53 AM

------------------------------------
Reply:

Ok, I got it...so you are not able to see what I see in my OWA for those users.

Add another user in this Group and check...Did you check with all the browsers?

Gulab Prasad,
MCITP: Exchange Server 2010 | MCITP: Exchange Server 2007
MCITP: Lync Server 2010 | MCITP: Windows Server 2008
My Blog | Z-Hire Employee Provisioning App
Skype: Exchange.Ranger

------------------------------------
Reply:

I made a copy of one of the users I am trying to affect. Zoe Zygote, a small man, but an exact copy of my target users. Here is what he sees, and if you scroll to the right, you will see that "Manage Your Organization" is blue, so it has been clicked on, but after 10 minutes, nothing happens. The status bar doesn't display anything. I have deleted and recreated the ecp folder, in case you are wondering.

Edited by LonesomeDove Saturday, January 28, 2012 5:27 AM

------------------------------------
Reply:

Hi,

check if you have the key register "OMECPDisabled" under "HKEY_LOCAL_MACHINE\SOFTWARE\MICROSOFT\ExchangeServer\v14." remove it.

http://technet.microsoft.com/en-us/magazine/hh848768.aspx

Regards,

Best Regards Don't forget to mark it as answer if it helps

------------------------------------
Reply:

Here is what finally worked:
1. Download and install IIS 6 Resource Kit. (It is fully compatible with IIS 7).
2. Login as the local Administrator. Domain admin will not do.
3. Open Metabase Explorer in RK Tools.
4. Navigate to LM – W3SVC – 1 - Root
5. Delete the ECP key and sub keys.
6. Open EMS and run New-EcpVirtualDirectory.
&. Sigh from relief.

------------------------------------
Reply:

I confirm that this solution worked.
We experienced the same problem.
Tnx .

PS: we needed to remove the old ecp virtual directory with Remove-EcpVirtualDirectory

------------------------------------

Is it possible to copy a package?

Hello,

I have Sccm 2012 and I'm looking a way to copy a package (with deploy configuration, scripts, etc) from one collection to other collection because I want to avoid create the same package for 12 collections but I'm not be able to find a way to do it.

Thnak you in advance for the Help.

Reply:

You don't do it this way. You create one package and deploy it to multiple collections

Cheers Paul | http://sccmentor.wordpress.com

------------------------------------
Reply:

Thank you for the answer,

I thought that option, but I want that the pakage is in the different distributions points, I don't want to have problems with the line because there are a lot of collections with a lot of computers in different contries. I need to have the package in each distribution points.

------------------------------------
Reply:

Therefore create Distribution groups based on your boundaries for content location awareness.

Cheers Paul | http://sccmentor.wordpress.com

------------------------------------
Reply:

Hello,

I'm not sure what do you want to say, can you explain it better. Currently I have a collection for each office and each country, also I have a distribution point and boundary for each collection.

Thank you.

------------------------------------
Reply:

You can organise your DP's into groups and apply them to particular boundaries but it sounds like you are already doing this with your DP's (they don't have to be in groups).

When you create a package you distribute it to the DP's and this where the package is copied to, not the collections. You then deploy the package to the collection and this targets that package at any of the clients in the collection. They then download the package from the DP's when they pick up that deployment from policy.

Cheers Paul | http://sccmentor.wordpress.com

------------------------------------

SCCM 2012 Private Cloud

Dear All,

I Certified SCCM2012 , Now I would become to SCCM2012 Private Cloud MCSE so I would request all can you just guide me how to take turn .

How to practice in our home environment ?

Etc ..!

Best Regard's Krishna

Reply:

AFAIK,there is no specific course for Configmgr 2012 Private cloud .The private cloud is available for system center 2012 products. more information about the private cloud certificate for system center is here https://www.microsoft.com/learning/en-in/exam-70-246.aspx and https://www.microsoft.com/learning/en-in/exam-70-247.aspx

http://blogs.technet.com/b/keithmayer/archive/2012/07/23/get-certified-on-mcse-private-cloud-with-this-free-step-by-step-study-guide-hyper-v-privatecloud-sysctr.aspx

Eswar Koneti | Configmgr Blog: www.eskonr.com | Linkedin: Eswar Koneti | Twitter: eskonr

------------------------------------
Reply:

Eswar,

Can I get the document / Blog how to setup the private Cloud SCCM 2012 ?

Best Regard's Krishna

------------------------------------
Reply:

There is nothing special about configmgr 2012 in private cloud.what are you trying to do exactly ? if you want to do cloud certification on system center (again no special course on Configmgr regards to private cloud) ,go through the above links and take a training on the subject courses . You will find many online courses as well.

Eswar Koneti | Configmgr Blog: www.eskonr.com | Linkedin: Eswar Koneti | Twitter: eskonr

------------------------------------

WSUS Server itself does not update, error: 80244019

Hello,

we have set up a new WSUS Server 2012 R 2 in order to replace our old w2k3 WSUS. The WindowsUpdate information is pushed to cleints/server via GPO's. There is one GPO for all Domain Servers (WSUS is one of them). Everything works fine so far, beside WSUS it self. I mean the OS Server where WSUS Services runs on.

WSUS Servicees work fine, we download patches from Widnows update and they are deployed, reso. requested and downloaded by all clients from our WSUS than. But the WSUS server itself when it checks for updates,it gets notified about e.g. 70 updates to be applied. Once I say install updates it returns error code 80244019.

I have to say that the policy sets WUServer, WUStatusServer and a TargetGroup, and some other settings like reboot yes/no, etc..... Identical settings, same GPO) works for all other servers in the network.

Also, I have set WSUS port to 80 from 8530 or 8531, whatever it was.

telnet wsus.domain.intra 80 works from the localhost (WSUS)

Any idea why WSUS itself is special?

kind regards,

Dieter Tontsch

PS:
this is what I see in the Event Log, ID 1001

Fault bucket , type 0
Event Name: WindowsUpdateFailure2
Response: Not available
Cab Id: 0

Problem signature:
P1: 7.9.9600.17031
P2: 80244019
P3: 34CBB58A-0567-4183-80A2-4659766883DC
P4: Download
P5: 101
P6: Managed {3DA21691-E39D-4DA6-8A4B-B43877BCB1B7}
P7: 0
P8:
P9:
P10:

Attached files:

These files may be available here:
C:\ProgramData\Microsoft\Windows\WER\ReportQueue\NonCritical_7.9.9600.17031_7184bfc5c320c0f8948b2b3ae24749b74782586_00000000_cab_0ec23fa4

Analysis symbol:
Rechecking for solution: 0
Report Id: e4875146-159a-11e5-80be-00505685263b
Report Status: 4
Hashed bucket:

Edited by Dieter Tontsch, mobileX Thursday, June 18, 2015 9:20 AM addition event log

Reply:

...we have set up a new WSUS Server 2012 R 2 in order to replace our old w2k3 WSUS.

Also, I have set WSUS port to 80 from 8530 or 8531, whatever it was.

telnet wsus.domain.intra 80 works from the localhost (WSUS)

Any idea why WSUS itself is special?

WSUS on WS2012/R2 does not run on port 80; it runs on port 8530 (or 8531 if you implemented SSL).
Regardless of WSUS-as-client or other clients, WSUS v6 (WS2012/R2) does not run or port 80.

Unless you have reconfigured it to do so - which is AFAIK totally unsupported.

IIS will be listening on the default website on port 80 but that is not WSUS client webservice.

For the WUAgent problem on WSUS itself, just as for any other WSUS client you must examine the c:\windows\windowsupdate.log

It may be a name resolution or routing issue, in case your WSUS is multi-homed ?

Don
(Please take a moment to "Vote as Helpful" and/or "Mark as Answer", where applicable.
This helps the community, keeps the forums tidy, and recognises useful contributions. Thanks!)

------------------------------------
Reply:

Hello,
port 80 may not be supported, but in this case it was not the issue - since my server in charge could communicate with wsus without any issue. I have switched back to 8350 however afterwards, but my update started working again after I did once "wuauclt.exe /resetauthorization /detectnow". It only started working again after that, not after any reboot or so. I guess /resetauthorization was the key parameter.

------------------------------------

Be our System Center Guru of the month! Let us bestow glory and kudos upon you!

TechNet Gurus... we salute you!

You're awesome, and we know it!

Your knowledge uploads and nifty info nuggets are our life blood at TechNet Wiki.

Every awesome article that gets an award is just the start. We are building up the most sensational collection of gifts of knowledge from eminent community heavy weights and young guns alike. And we plan to promote you and your work wherever we can.

Reputations are being forged.

History is being made.

Generations will know your name.

Your children, grandchildren and great-grandchildren will marvel at your technical prowess.

And now, my mighty code warriors, cool consultants and platform specialists, now your chance is here again.

A new month of possibilities. Another chance to prove YOU are the ONE!

The mighty TechNet Guru medal winner for June!

Take up your mouse and keyboard!

Unleash your mighty words of wisdom and bask in the glory that we bestow upon you!

GO GO Gurus! Give, give, give!

All you have to do is add an article to TechNet Wiki from your own specialist field. Something that fits into one of the categories listed on the submissions page. Copy in your own blog posts, a forum solution, a white paper, or just something you had to solve for your own day's work today.

Drop us some nifty knowledge, or superb snippets, and become MICROSOFT TECHNOLOGY GURU OF THE MONTH!

This is an official Microsoft TechNet recognition, where people such as yourselves can truly get noticed!

HOW TO WIN

1) Please copy over your Microsoft technical solutions and revelations to TechNet Wiki.

2) Add a link to it on THIS WIKI COMPETITION PAGE (so we know you've contributed)

3) Every month, we will highlight your contributions, and select a "Guru of the Month" in each technology.

If you win, we will sing your praises in blogs and forums, similar to the weekly contributor awards. Once "on our radar" and making your mark, you will probably be interviewed for your greatness, and maybe eventually even invited into other inner TechNet/MSDN circles!

Winning this award in your favoured technology will help us learn the active members in each community.

Feel free to ask any questions below.

More about TechNet Guru Awards

Submit now : http://social.technet.microsoft.com/wiki/contents/articles/31200.technet-guru-contributions-june-2015.aspx

Thanks in advance!
Pete Laker

#PEJL
Got any nice code? If you invest time in coding an elegant, novel or impressive answer on MSDN forums, why not copy it over to TechNet Wiki, for future generations to benefit from! You'll never get archived again, and you could win weekly awards!

Have you got what it takes o become this month's TechNet Technical Guru? Join a long list of well known community big hitters, show your knowledge and prowess in your favoured technologies!

Reply:

We have no System Center articles yet!

And 7 days to go!

Ed Price, Azure & Power BI Customer Program Manager (Blog, Small Basic, Wiki Ninjas, Wiki)

Answer an interesting question? Create a wiki article about it!

------------------------------------

Be our FIM Guru of the month! Let us bestow glory and kudos upon you!

TechNet Gurus... we salute you!

You're awesome, and we know it!

Your knowledge uploads and nifty info nuggets are our life blood at TechNet Wiki.

Reputations are being forged.

History is being made.

Generations will know your name.

Your children, grandchildren and great-grandchildren will marvel at your technical prowess.

And now, my mighty code warriors, cool consultants and platform specialists, now your chance is here again.

A new month of possibilities. Another chance to prove YOU are the ONE!

The mighty TechNet Guru medal winner for June!

Take up your mouse and keyboard!

Unleash your mighty words of wisdom and bask in the glory that we bestow upon you!

GO GO Gurus! Give, give, give!

Drop us some nifty knowledge, or superb snippets, and become MICROSOFT TECHNOLOGY GURU OF THE MONTH!

This is an official Microsoft TechNet recognition, where people such as yourselves can truly get noticed!

HOW TO WIN

1) Please copy over your Microsoft technical solutions and revelations to TechNet Wiki.

2) Add a link to it on THIS WIKI COMPETITION PAGE (so we know you've contributed)

3) Every month, we will highlight your contributions, and select a "Guru of the Month" in each technology.

Winning this award in your favoured technology will help us learn the active members in each community.

Feel free to ask any questions below.

More about TechNet Guru Awards

Submit now : http://social.technet.microsoft.com/wiki/contents/articles/31200.technet-guru-contributions-june-2015.aspx

Thanks in advance!
Pete Laker

Reply:

We have 1 FIM article:

FIM 2010 R2: SSPR-OTP User pre-register using OOTB by Giriraj Singh

And 7 days to go!

Ed Price, Azure & Power BI Customer Program Manager (Blog, Small Basic, Wiki Ninjas, Wiki)

Answer an interesting question? Create a wiki article about it!

------------------------------------

Be our BizTalk Guru of the month! Let us bestow glory and kudos upon you!

TechNet Gurus... we salute you!

You're awesome, and we know it!

Your knowledge uploads and nifty info nuggets are our life blood at TechNet Wiki.

Reputations are being forged.

History is being made.

Generations will know your name.

Your children, grandchildren and great-grandchildren will marvel at your technical prowess.

And now, my mighty code warriors, cool consultants and platform specialists, now your chance is here again.

A new month of possibilities. Another chance to prove YOU are the ONE!

The mighty TechNet Guru medal winner for June!

Take up your mouse and keyboard!

Unleash your mighty words of wisdom and bask in the glory that we bestow upon you!

GO GO Gurus! Give, give, give!

Drop us some nifty knowledge, or superb snippets, and become MICROSOFT TECHNOLOGY GURU OF THE MONTH!

This is an official Microsoft TechNet recognition, where people such as yourselves can truly get noticed!

HOW TO WIN

1) Please copy over your Microsoft technical solutions and revelations to TechNet Wiki.

2) Add a link to it on THIS WIKI COMPETITION PAGE (so we know you've contributed)

3) Every month, we will highlight your contributions, and select a "Guru of the Month" in each technology.

Winning this award in your favoured technology will help us learn the active members in each community.

Feel free to ask any questions below.

More about TechNet Guru Awards

Submit now : http://social.technet.microsoft.com/wiki/contents/articles/31200.technet-guru-contributions-june-2015.aspx

Thanks in advance!
Pete Laker

Reply:

Thanks for sharing this information to us.

With regards,

Angie

We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click HERE to participate the survey.

------------------------------------
Reply:

We have 2 BizTalk articles:

And 7 days to go!

Ed Price, Azure & Power BI Customer Program Manager (Blog, Small Basic, Wiki Ninjas, Wiki)

Answer an interesting question? Create a wiki article about it!

------------------------------------

Be our Azure Guru of the month! Let us bestow glory and kudos upon you!

TechNet Gurus... we salute you!

You're awesome, and we know it!

Your knowledge uploads and nifty info nuggets are our life blood at TechNet Wiki.

Reputations are being forged.

History is being made.

Generations will know your name.

Your children, grandchildren and great-grandchildren will marvel at your technical prowess.

And now, my mighty code warriors, cool consultants and platform specialists, now your chance is here again.

A new month of possibilities. Another chance to prove YOU are the ONE!

The mighty TechNet Guru medal winner for June!

Take up your mouse and keyboard!

Unleash your mighty words of wisdom and bask in the glory that we bestow upon you!

GO GO Gurus! Give, give, give!

Drop us some nifty knowledge, or superb snippets, and become MICROSOFT TECHNOLOGY GURU OF THE MONTH!

This is an official Microsoft TechNet recognition, where people such as yourselves can truly get noticed!

HOW TO WIN

1) Please copy over your Microsoft technical solutions and revelations to TechNet Wiki.

2) Add a link to it on THIS WIKI COMPETITION PAGE (so we know you've contributed)

3) Every month, we will highlight your contributions, and select a "Guru of the Month" in each technology.

Winning this award in your favoured technology will help us learn the active members in each community.

Feel free to ask any questions below.

More about TechNet Guru Awards

Submit now : http://social.technet.microsoft.com/wiki/contents/articles/31200.technet-guru-contributions-june-2015.aspx

Thanks in advance!
Pete Laker

Reply:

These forums are how I found out about the TechNet Wiki. I have since been an Azure Guru two times.

If you are looking to get some exposure for yourself this is an excellent way to do it. See the Wiki Ninjas Blog for all kinds of reasons as to why you should get involved.

------------------------------------
Reply:

These forums are how I found out about the TechNet Wiki. I have since been an Azure Guru two times.

If you are looking to get some exposure for yourself this is an excellent way to do it. See the Wiki Ninjas Blog for all kinds of reasons as to why you should get involved.

Thanks Ken! This is very helpful!

Ed Price, Azure & Power BI Customer Program Manager (Blog, Small Basic, Wiki Ninjas, Wiki)

Answer an interesting question? Create a wiki article about it!

------------------------------------
Reply:

We have 5 Azure articles:

And 7 days to go!

Ed Price, Azure & Power BI Customer Program Manager (Blog, Small Basic, Wiki Ninjas, Wiki)

Answer an interesting question? Create a wiki article about it!

------------------------------------

SCCM Client in untrusted forest

I've installed a client in an untrusted forest using the following command line

SMSSITECODE = xxx SMSMP=FQDN FSP=FQDN DNSSUFFIX=suffix

I see the machine in SCCM (unapproved but that's expected). However, the client is only partially installed (only two actions in the control panel applet)

Looking at locationServices, I see that the client is looking to AD, then registry then DNS for its location and it's complaining that it can't find anything.

I haven't published site information to the untrusted forest, is that the recommendation?

Reply:

Hi,

Did you approve it? otherwise the client will not show more than to actions in the control panel applett as it is not approved to talk to the SCCM Site.

Regards,
Jörgen

-- My System Center blog ccmexec.com -- Twitter @ccmexec

------------------------------------
Reply:

Yes we did, in LocationServices I am seeing

failed to retrieve MP certificate encryption info from AD

Failed to retrieve root site code from AD

------------------------------------
Reply:

This single line does not help as it just shows that the client cannot retrieve anything from AD. Is it able to get the information from the MP itself instead?

Torsten Meringer | http://www.mssccmfaq.de

------------------------------------
Reply:

Here is a section of LocationServices.log

Executing Task LSRefreshDefaultMPTask LocationServices 6/23/2015 8:57:57 AM 3456 (0x0D80)
Failed to refresh security settings over AD with error 0x87d00215. LocationServices 6/23/2015 8:57:57 AM 1284 (0x0504)
Retrieved MP [xxx.xxx.com] from Registry LocationServices 6/23/2015 8:57:57 AM 1284 (0x0504)
Attempting to retrieve lookup MP(s) from AD LocationServices 6/23/2015 8:57:57 AM 1284 (0x0504)
No lookup MP(s) from AD LocationServices 6/23/2015 8:57:57 AM 1284 (0x0504)
Attempting to retrieve lookup MP(s) from DNS LocationServices 6/23/2015 8:57:57 AM 1284 (0x0504)
Attempting to retrieve default management points from DNS LocationServices 6/23/2015 8:57:57 AM 1284 (0x0504)
Found DNS record of xxx.xxx.com port 80 LocationServices 6/23/2015 8:57:57 AM 1284 (0x0504)
Lookup Management Points from DNS: LocationServices 6/23/2015 8:57:57 AM 1284 (0x0504)
Name: xxx.xxx.com HTTPS: 'N' ForestTrust: 'N' LocationServices 6/23/2015 8:57:57 AM 1284 (0x0504)
Retrieved lookup MP(s) from DNS LocationServices 6/23/2015 8:57:57 AM 1284 (0x0504)
Attempting to retrieve site information from lookup MP(s) via HTTP LocationServices 6/23/2015 8:57:57 AM 1284 (0x0504)
LSGetSiteInformationFromManagementPoint('PIS'): Assignment Site Code [PIS], Version [5.00.8239.1000], Capabilities [<Capabilities SchemaVersion="1.0"/>], Client Operational Settings [<ClientOperationalSettings><Version>5.00.8239.1000</Version><SecurityConfiguration><SecurityModeMask>0</SecurityModeMask><SecurityModeMaskEx>480</SecurityModeMaskEx><HTTPPort>80</HTTPPort><HTTPSPort>443</HTTPSPort><CertificateStoreName></CertificateStoreName><CertificateIssuers></CertificateIssuers><CertificateSelectionCriteria></CertificateSelectionCriteria><CertificateSelectFirstFlag>1</CertificateSelectFirstFlag><SiteSigningCert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iteSigningCert></SecurityConfiguration></ClientOperationalSettings>]. LocationServices 6/23/2015 8:57:57 AM 1284 (0x0504)
Refreshed security settings over MP LocationServices 6/23/2015 8:57:57 AM 1284 (0x0504)
No security settings update detected. LocationServices 6/23/2015 8:57:57 AM 1284 (0x0504)
Executing Task LSMPCommSuccessTask LocationServices 6/23/2015 8:57:57 AM 1284 (0x0504)
Retrieved MP [xxx.xxx.com] from Registry LocationServices 6/23/2015 8:57:57 AM 3456 (0x0D80)
Attempting to retrieve lookup MP(s) from AD LocationServices 6/23/2015 8:57:57 AM 3456 (0x0D80)
No lookup MP(s) from AD LocationServices 6/23/2015 8:57:57 AM 3456 (0x0D80)
Attempting to retrieve lookup MP(s) from DNS LocationServices 6/23/2015 8:57:57 AM 3456 (0x0D80)
Attempting to retrieve default management points from DNS LocationServices 6/23/2015 8:57:57 AM 3456 (0x0D80)
Found DNS record of xxx.xxx.com port 80 LocationServices 6/23/2015 8:57:57 AM 3456 (0x0D80)
Lookup Management Points from DNS: LocationServices 6/23/2015 8:57:57 AM 3456 (0x0D80)
Name: xxx.xxx.com HTTPS: 'N' ForestTrust: 'N' LocationServices 6/23/2015 8:57:57 AM 3456 (0x0D80)
Retrieved lookup MP(s) from DNS LocationServices 6/23/2015 8:57:57 AM 3456 (0x0D80)
Reset assigned MP error count LocationServices 6/23/2015 8:57:57 AM 1284 (0x0504)
Unable to retrieve compatible MP(s) from AD LocationServices 6/23/2015 8:57:57 AM 3456 (0x0D80)
Attempting to retrieve default management points from lookup MP(s) via HTTP LocationServices 6/23/2015 8:57:57 AM 3456 (0x0D80)
Current AD site of machine is Default-First-Site-Name LocationServices 6/23/2015 8:57:57 AM 3456 (0x0D80)
Default Management Points from MP: LocationServices 6/23/2015 8:57:57 AM 3456 (0x0D80)
Name: xxx.xxx.com HTTPS: 'N' ForestTrust: 'N' LocationServices 6/23/2015 8:57:57 AM 3456 (0x0D80)
Name: xxx.xxx.com HTTPS: 'N' ForestTrust: 'N' LocationServices 6/23/2015 8:57:57 AM 3456 (0x0D80)
LSUpdateInternetManagementPoints LocationServices 6/23/2015 8:57:57 AM 3456 (0x0D80)
Current AD site of machine is Default-First-Site-Name LocationServices 6/23/2015 8:57:57 AM 3456 (0x0D80)
LSUpdateInternetManagementPoints: No internet MPs were retrieved from MP PIS03CDIVSCCM01.CDI.CDICorp.net, clearing previous list. LocationServices 6/23/2015 8:57:57 AM 3456 (0x0D80)
Persisting the default management points in WMI LocationServices 6/23/2015 8:57:57 AM 3456 (0x0D80)
Default Management Points from MP: LocationServices 6/23/2015 8:57:57 AM 3456 (0x0D80)
Name: xxx.xxx.com HTTPS: 'N' ForestTrust: 'N' LocationServices 6/23/2015 8:57:57 AM 3456 (0x0D80)
Name: xxx.xxx.com HTTPS: 'N' ForestTrust: 'N' LocationServices 6/23/2015 8:57:57 AM 3456 (0x0D80)
Persisted Default Management Point Locations locally LocationServices 6/23/2015 8:57:57 AM 3456 (0x0D80)
Current AD site of machine is Default-First-Site-Name LocationServices 6/23/2015 8:57:57 AM 3456 (0x0D80)
Attempting to retrieve local MPs from the assigned MP LocationServices 6/23/2015 8:57:58 AM 3456 (0x0D80)
Current AD site of machine is Default-First-Site-Name LocationServices 6/23/2015 8:57:58 AM 3456 (0x0D80)
Refreshing the Management Point List for site PIS LocationServices 6/23/2015 8:57:58 AM 3456 (0x0D80)
Failed to retrieve MP certificate encryption info from AD. LocationServices 6/23/2015 8:57:58 AM 3456 (0x0D80)
Raising event:
instance of CCM_CcmHttp_Status
{
ClientID = "GUID:9791BF07-90B6-42CE-BFE3-236E114ABA08";
DateTime = "20150623125758.493000+000";
HostName = "PIS03CDIVSCCM01.CDI.CDICorp.net";
HRESULT = "0x00000000";
ProcessID = 3428;
StatusCode = 0;
ThreadID = 3456;
};
LocationServices 6/23/2015 8:57:58 AM 3456 (0x0D80)
Refreshing trusted key information LocationServices 6/23/2015 8:57:58 AM 3456 (0x0D80)
Failed to retrieve Root Site Code from AD with error 0x87d00215. LocationServices 6/23/2015 8:57:58 AM 3456 (0x0D80)
Raising event:
instance of CCM_CcmHttp_Status
{
ClientID = "GUID:9791BF07-90B6-42CE-BFE3-236E114ABA08";
DateTime = "20150623125758.555000+000";
HostName = "xxx.xxx.com";
HRESULT = "0x00000000";
ProcessID = 3428;
StatusCode = 0;
ThreadID = 3456;
};
LocationServices 6/23/2015 8:57:58 AM 3456 (0x0D80)
Persisting the management point authentication information in WMI LocationServices 6/23/2015 8:57:58 AM 3456 (0x0D80)
Persisted Management Point Authentication Information locally LocationServices 6/23/2015 8:57:58 AM 3456 (0x0D80)
Current AD site of machine is Default-First-Site-Name LocationServices 6/23/2015 8:57:58 AM 3456 (0x0D80)
Failed to retrieve MP certificate encryption info from AD. LocationServices 6/23/2015 8:57:58 AM 1284 (0x0504)
Current AD site of machine is Default-First-Site-Name LocationServices 6/23/2015 8:57:58 AM 3456 (0x0D80)
Raising event:
instance of CCM_CcmHttp_Status
{
ClientID = "GUID:9791BF07-90B6-42CE-BFE3-236E114ABA08";
DateTime = "20150623125758.727000+000";
HostName = "PIS03CDIVSCCM01.CDI.CDICorp.net";
HRESULT = "0x00000000";
ProcessID = 3428;
StatusCode = 0;
ThreadID = 1284;
};
LocationServices 6/23/2015 8:57:58 AM 1284 (0x0504)
Raising event:
instance of CCM_CcmHttp_Status
{
ClientID = "GUID:9791BF07-90B6-42CE-BFE3-236E114ABA08";
DateTime = "20150623125758.805000+000";
HostName = "xxx.xxx.com";
HRESULT = "0x00000000";
ProcessID = 3428;
StatusCode = 0;
ThreadID = 1284;
};
LocationServices 6/23/2015 8:57:58 AM 1284 (0x0504)
Attempting to refresh certificate information from AD LocationServices 6/23/2015 8:57:58 AM 1956 (0x07A4)
Failed to refresh certificate information from AD LocationServices 6/23/2015 8:57:58 AM 1956 (0x07A4)
Refreshing Certifcate Information over HTTP LocationServices 6/23/2015 8:57:58 AM 1956 (0x07A4)
Raising event:
instance of CCM_CcmHttp_Status
{
ClientID = "GUID:9791BF07-90B6-42CE-BFE3-236E114ABA08";
DateTime = "20150623125758.883000+000";
HostName = "xxx.xxx.com";
HRESULT = "0x00000000";
ProcessID = 3428;
StatusCode = 0;
ThreadID = 1956;
};
LocationServices 6/23/2015 8:57:58 AM 1956 (0x07A4)
Refreshed Certificate Information over HTTP LocationServices 6/23/2015 8:57:58 AM 1956 (0x07A4)
Updating portal information. LocationServices 6/23/2015 8:57:58 AM 2884 (0x0B44)
Received reply of type PortalCertificateReply LocationServices 6/23/2015 8:57:59 AM 2884 (0x0B44)
The reply from location manager contains 1 certificates LocationServices 6/23/2015 8:57:59 AM 2884 (0x0B44)
Updating portal certificates LocationServices 6/23/2015 8:57:59 AM 2884 (0x0B44)
Successfully created context from the raw certificate. LocationServices 6/23/2015 8:57:59 AM 2884 (0x0B44)
Raising event:
instance of CCM_CcmHttp_Status
{
ClientID = "GUID:9791BF07-90B6-42CE-BFE3-236E114ABA08";
DateTime = "20150623125759.071000+000";
HostName = "pis03cdivsccm02.CDI.CDICorp.net";
HRESULT = "0x00000000";
ProcessID = 3428;
StatusCode = 0;
ThreadID = 1284;
};
LocationServices 6/23/2015 8:57:59 AM 1284 (0x0504)

------------------------------------
Reply:

Looks good (given that xxx is the correct MP). What does ClientIDManagerStartup.log tell?

Torsten Meringer | http://www.mssccmfaq.de

------------------------------------
Reply:

For some reason I cannot post the contents of the log file, here is a link to the log

http://1drv.ms/1K8gCx0

looks like WMI?

------------------------------------
Reply:

Just to update this thread in case anyone else reads this.

After waiting over an hour the client is installed. Other clients didn't take that long to install so I have no idea why this one did.

Thanks for all your help...

------------------------------------

phone 640 lte

how to turn off narrator

Build 10130 doesn't boot unless Multicore CPU and Hyper-threading are disabled

I first encountered the issue when trying to upgrade from 10122 to 10130, the system turned into a boot loop: windows logo appeared, then PC rebooted. After 2 reboots windows logo appeared with message containing roughly something like "Preparing repair mode" and then it rebooted just like before.

I've downloaded build 10130 ISO and tried to boot from USB stick and ancountered the same issue: when booting from USB, windows logo showed up for several seconds and then the system rebooted.

After searching the internet I've found a solution to this problem here: https://www.reddit.com/r/Windows10/comments/38aa8a/for_everyone_thats_getting_stuck_in_a_boot_loop/

Basically system doesn't boot if either hyper-threading or multicore CPU options are enabled in BIOS. I've managed to successfuly install 10130 after disabling HT and multicore, and turning either back on prevents system from booting.

Is this a known issue? Are there workarounds/ways to enable at least multicore support in 10130?

I'm using HP ProBook 470G1 with Intel Core i3 CPU.

Changed type Michael_LSModerator Thursday, June 25, 2015 6:50 AM

Reply:

I did not have that problem I have dual Xeon 8 Core with Hyper-threading enable no such problems.

Regards

Shawn.

------------------------------------
Reply:

I am running 10130 on an Desktop i7. It has Hyper and 4 cores. I have not experienced any issues with this build.

------------------------------------
Reply:

I am running 10130 on an Desktop i7. It has Hyper and 4 cores. I have not experienced any issues with this build.

I'm pretty confident this build wouldn't make it to fast ring if it didn't support multicore CPUs or HT at all.

Obviously the issue occurs on very specific kinds of hardware configurations, although apparently I'm not the only one experiencing this problem, as evident from the reddit link I provided in the original post.

I'd like to know if there's some kind of workaround or at least hotfix in testing that would resolve the issue. I'd very much like to continue participating in Insider program but lack of multicore support is a blocker for me and forced me to roll back to 8.1.

------------------------------------
Reply:

Alex,

Thanks for sharing this.

Currently there seems to be a little ahrd to offer any workarounds based on the special situation.

I can only suggest that we submit feedbacks with your system information on this topic and wait for the updates regarding the special hardwares.

Regards

Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact tnmff@microsoft.com.

------------------------------------
Reply:

Mystery solved for me! Thanks! This is exactly what the problem was on my ASUS Z87-C board with an i5 processor, well the multicore part was the problem, I didn't have hyperthreading on as the i5 doesn't have hyperthreading. At least now I know.

------------------------------------
Reply:

Disabling multicore solved my boot loop on an HP Elitebook 6930p

------------------------------------

-append searchmailbox log

Hello

I have E3 licenses and I am preforming searches with Powershell.

When we have a Phishing attack, I will have a CSV file of the mailboxes that were targeted. We would like to delete the email and know which users opened the email. I would use the following:

import-csv example.csv | % {search-mail $_.upn -Searchquery "from:example@example.com" -deletecontent -loglevel full -targetfolder Examplefolder -targetmailbox examplemailox}

This does what I want and gives me the information I want, but not in the format I want. The log files are separate CSVs for each mailbox, I'd like to do something similar to -append so that I would have one CSV withal the log information.

Is this and if so how do I do it?

Thank you

Steve

Reply:

Get-ChildItem *.csv |%{Import-Csv $_}| Export-Csv combined.csv

\_(ツ)_/

Edited by jrv Monday, June 22, 2015 8:34 PM

------------------------------------
Reply:

Hello,

Thanks for the response, but I'm sorry I don't really follow. If I could send the logs to a file, I would see how this would work, but the logs get sent to an outlook mailbox as a zipped attachment and a different mail item for each mailbox searched.

Further explanation on this process would be greatly appreciated.

Thanks again

Steve

------------------------------------
Reply:

Hello,

Thanks for the response, but I'm sorry I don't really follow. If I could send the logs to a file, I would see how this would work, but the logs get sent to an outlook mailbox as a zipped attachment and a different mail item for each mailbox searched.

Further explanation on this process would be greatly appreciated.

Thanks again

Steve

I think you will have to learn PowerShell to understand. You import the file so the file exists. Just get al of the files and generate a single file.

\_(ツ)_/

------------------------------------

KB fix for print document name in event logs on Server 2012 and Server 2012R2

It appears as though the requested corrections to the documentation where never honored

Note After you apply the hotfix or update, you can show the printed document name in the event by enabling a specific Group Policy.

The policy name:

Computer Configuration \ Administrative Templates \ Printers

Allow job name in event logs

The Windows 8 / Server 2012 fix is:

Event ID 307 does not show the printed document name in Windows
http://support.microsoft.com/kb/2938013/en-us

2012R2 is in the April Roll up.

Windows RT 8.1, Windows 8.1, and Windows Server 2012 R2 Update: April 2014
http://support.microsoft.com/kb/2919355/en-us

Alan Morris Windows Printing Team

Reply:

In my simple test, I see that the Group-Policy does exist on 2012R2 but not for 2012.

I isolated the registry changes so I can update a 2012 only system... that text is below.

Windows Registry Editor Version 5.00

[HKEY_LOCAL_MACHINE\SOFTWARE\Wow6432Node\Policies\Microsoft\Windows NT\Printers]
"ShowJobTitleInEventLogs"=dword:00000001

[HKEY_LOCAL_MACHINE\SOFTWARE\Policies\Microsoft\Windows NT\Printers]
"ShowJobTitleInEventLogs"=dword:00000001

I hope this helps others out since it took sometime to narrow this down. Thank you.

------------------------------------
Reply:

Thank you. That did the trick.

Note that if you edit the registry manually, entering the first key under \Wow6432Node Windows will create the second entry automatically.

------------------------------------
Reply:

group policy ShowJobTitleInEventLogs helps too!

------------------------------------
Reply:

Working for me too

Thanks

Even not restarted

Just printed test page ang file names appeared - even oldies

Thanks again

------------------------------------

Hyper-V Management Tools - POLL

Hi Everyone,

I am looking to get some feed back from the real world on what management software is being most widely used by Hyper-V users to manage their Hyper-V virtual datacenters. If you could please let me know from the following options it would be great. The goal is to create a plug-in/console for the software that is used by most Hyper-V deployments.

Please respond to the thread with your replies.

Options:

System Center Virtual Machine Manager
Failover Cluster Manager
Hyper-V Manager

Thanks!

Edited by MicrosoftPK Tuesday, June 23, 2015 12:49 PM

Reply:

Hi,

for just 1 server u can use hyperv manager, if u have 2 or more servers, i think cluster manager will do. For scvmm u need some extra skils, u need to understand the network topology in scvmm.

U can take a look for hyperv manager from 5nine company if u dont like hyperv manager.

Edited by sbaltic Tuesday, June 23, 2015 1:49 PM

------------------------------------
Reply:

Thanks sblatic.

Do you know what is recommended by Microsoft or what do actual Hyper-V users lean towards? I know this is a "it depends" answer based on the environment - but any feedback will be valuable. We can assume there are more than 2 Hyper-V servers.

------------------------------------
Reply:

None of those three do the job 100% for anything other than standalone hosts, so I think you'll find most people using a combination. I use all three and lots of PowerShell. There are third party tools to consider as well.

Eric Siron
Altaro Hyper-V Blog
I am an independent blog contributor, not an Altaro employee. I am solely responsible for the content of my posts.

------------------------------------
Reply:

Right there with Eric.

Also, only SCVMM really has any type of plug-in model. The other two don't due to the Server Manager underpinnings.

Hyper-V Manager was built for individual hosts. Cluster Manager for clustered hosts (HA). And SCVMM has its own paradigm, but would be your datacenter option.

And don't forget Windows Azure Pack, and the new Azure Stack.

Each has its own paradigm.

Then you do have some strong 3rd parties in the market. Mainly 5Nine.

Brian Ehlert
http://ITProctology.blogspot.com
Learn. Apply. Repeat.

------------------------------------

Adding 2012 DC to a 2008R2 domain which still contains a 2003 DC

We need to remove a legacy 2003 DC, which also contains a certificate role service, but for now we just want to remove the domain controller feature. My supervisor was told by a class instructor that there are some challenges with introducing a 2012 DC into a domain containing a 2003 DC. We're not sure if that meant a 2003-only environment (which doesn't apply to us) or an environment which already has a 2008R2 DC in it (which we have, it holds all the FSMO roles).

I have a new 2012 server in the domain, but have not added the domain role to it, leery of side effects. We do not have a test environment, are there any details I should check before installing the 2012 domain role? My SharePoint admin (we are using SP 2010 SP1) has asked if he'll still be able to access the domain by using the LDAP://domain.com syntax? We are using Exchange 2010 SP3 RU9, so we are good there.

In another forum post, someone stated:

It doesn't affect SharePoint functionality at all. What you have to keep in mind is that you have your User profile information synchronized afterwards and check if your authentication models has changed. In other words, SharePoint leverages the underlying AD infrastructure information, so make sure it is still with the same (like domain/domain controllers, authentication types etc)

Not sure how to validate the authentication model.

Thanks!

Changed type Vivian_Wang Wednesday, June 17, 2015 1:18 AM

Reply:

Hi,

Thanks for your post.

If you want to add windows server 2012 DC to your domain environment, Check to ensure the Domain Functional Level is currently setup to at least Windows 2003 mode. This is the lowest required Domain Functional Level that would allow a Windows Server 2012 Domain.

http://blogs.technet.com/b/canitpro/archive/2013/05/05/step-by-step-adding-a-windows-server-2012-domain-controller-to-an-existing-windows-2003-network.aspx

For sharepoint related issue, i think you could ask in sharepoint forums:

https://social.msdn.microsoft.com/Forums/office/en-US/home?category=sharepoint

Regards.

Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact tnmff@microsoft.com

------------------------------------
Reply:

Hi,

I just want to confirm what is the current situation.

Please feel free to let us know if you need further assistance.

Regards.

Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact tnmff@microsoft.com

------------------------------------
Reply:

The boss wants to depromo the old 2003 DC, then add the 2012 DC role on the new server because he wants to mitigate the concern his instructor had. If we need to keep the old server online for it's legacy Certificate role, then we need to give the new server a new name & IP. I wanted to keep the IP & name the same on the new server so we wouldn't have to update so many references to the services hosted on the new DC.

I would rather verify whether the certificate role is still being referenced in the environment, and if it isn't then not worry about losing that service; if it is still being referenced then I need to know how to migrate those services to another server; we already have a 2008R2 CA in the environment. If we get the Cert concern resolved, then it should be a straight forward transition.

Does this forum cover certificate server questions?

------------------------------------
Reply:

Hi,

For certificate server questions, you could ask in:

https://social.technet.microsoft.com/Forums/windowsserver/en-US/home?forum=winserversecurity

Regards.

Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact tnmff@microsoft.com

------------------------------------
Reply:

I got the CA moved to a 2008 server. We're currently using the 2003 forest & domain functional levels, and it won't let me raise it. Will they remain at those levels after I remove the last 2003 DC, or will it automatically upgrade them since the last 2003 DC was removed?

Edit: Will there be any effect on the external, 2-way, non-transitive trust we have with our sister company's domain, which is currently at a 2003 forest/domain functional level (2008 and 2008R2 are available though)?

Edited by JimCass Monday, June 22, 2015 8:50 PM

------------------------------------
Reply:

Hello,

if this is still an open issue there is no automatic raise from functional levels.

Which error is shown if you try to raise the levels?

Did you start with the domain or forest functional level?

Are all older OS DCs removed from the domain AND the AD database? Maybe there are some old DCs listed that where not removed correct with dcpromo?

Best regards

Meinolf Weber

MVP, MCP, MCTS

Microsoft MVP - Directory Services

My Blog: http://blogs.msmvps.com/MWeber

Disclaimer: This posting is provided AS IS with no warranties or guarantees and confers no rights.

Twitter:

------------------------------------
Reply:

Yes, still an open issue, tentatively planning to remove the 2003 DC from the environment about 10 hours from now.

When I attempt to raise the domain or forest functional level from Windows Server 2003, it states: You cannot raise the domain functional level because this domain includes Active Directory Domain Controllers that are not running the appropriate version of Windows.

I suspect this is because the Windows 2003 DC won't play nice with the later functional levels. So after removing and cleaning up the 2003 DC remnants, the levels will remain at 2003 but we should then be allowed to raise those levels.

Can anyone confirm whether trusts are effected by removing a domain controller or modifying the domain/forest functional levels?

------------------------------------

New Systems management Solution

I currently use Dell KACE systems for computer management. I have both the K1000 and the K2000 and have been working with them for about eight years. The exciting part is that you can get either a virtual system or the actual servers themselves here on site and they come ready to go and have a unique jump start process for training working with your own system. There is an article that might interest people if they are looking at or accessing different options for systems management. Following is the link for that article and I think many would find it interesting and beneficial. It is comparing Dell KACE 1000 and KACE 2000 Systems as well as LANDESK Management Suite 9.6 SP1, Microsoft System Center 2012 R2 Configuration Manager (SCCM) and Symantec Altiris Client Management Suite 7.5 SP!. I believe it is important to continually educate yourself on different options, often just to see what you have is best for your organization or you find a better, lower cost solution. Or you may even want to do a test with one of them. So if you get the chance, read this article:

http://en.community.dell.com/techcenter/b/techcenter/archive/2015/03/16/why-do-you-need-a-systems-management-solution-and-which-one-is-the-best-for-you-new-white-paper-from-ema-has-the-answers

User Access Logging Service

Hi Team

On windows server 2012 I am unable to start service " User Access Logging Serivce".

I have restarted the server then service was started but after some time it again went in starting mode.

Log Name : System

Source : TivolisvcMon

event id :900

Please guide me how to start this service.

Changed type Ganesh Parte Tuesday, July 7, 2015 2:51 PM Can we have any solution on this

my microsoft phone

my phone stuck on voice nrita command controls

Reply:

You have posted in the wrong forum. Try https://support2.microsoft.com/ask-community for questions related to Windows Phone.

Regards.

------------------------------------

Problem on manually Updating DPM Agent to 2012 R2 RU6 on passive node of SQL 2012 and 2014 Failover Clusters (With CSV on 2014)

Hi,

I would like confirmation that it is not possible to update (doing a manual install/update on the server) to rollup 6 agent on a passive sql 2012 or 2014 failover cluster node. More so I was not able to uninstall the dpm agent from the passive nodes. Only after failing over the sql instances I was able to update the agent with no problems what so ever.

The eventviewer show error 1023:

Product: Microsoft System Center 2012 R2 DPM Protection Agent - Update 'Microsoft System Center 2012 R2 DPM Protection Agent Update - KB3030574' could not be installed. Error code 1603. Additional information is available in the log file C:\Windows\\Temp\MSDPMAgentPatchInstall.LOG.

The above mentioned servers are in an untrusted domain and connected to dpm by using certificates.

I did some more test and it seems that the MSDTC Resource group needs to be active or the manual installation fails. It does install version 4.2.1205 but not the patch 4.2.1312. Whether DPM uses CErtificates does not maater in this case.

Regards,

DJITS

Edited by DJITS Tuesday, June 30, 2015 8:16 AM New Information

SQL Server Open File Dialog Freezes

I am havign a problem with open file dialog. when I select from the list next to "Look in" and then I click on a subfolder, sql server management studio freezes for a minute and then works.

Any thoughts?

Reply:

Yes, the SSMS will enumerate all of the files in the directory. If there are enough files, it will take a long time to complete.

You can see the same behavior with Windows Explorer, although Windows 7 Windows Explorer will start showing files before they are all enumerated.

How many files are in your subfolder?

RLF

------------------------------------
Reply:

just 10 files.

Thanks

------------------------------------
Reply:

I solved the issue.

I noticed that I had a mapped network drive that does not exist anymore.

I went and disconnected it and now sql server management studio is not freezing anymore

Thanks

------------------------------------
Reply:

Then the solution was the action you took. Great. - RLF

Edited by SQLWork Wednesday, November 30, 2011 9:12 PM

------------------------------------
Reply:

On my end I still had the SQL Server 2014 installation media mounted in Hyper-V, ejecting the disk instantly fixed the dialog.

My blog: blog.jessehouwing.nl

------------------------------------

Newbie Coding error in Visio/ Active Directory

Hey guys

I'm relatively new to Microsoft Visio and Active Directory. I'm trying to display the username's in an active directory but I keep running into error. I constantly have to define all my classes and it makes me wonder if I am doing it right. For example, in the code given below, I typed in PrincipalContext which wasn't found and after right clicking I had to generate a class for it. After which now ContextType has an error "ContextType" doesn't exist the current context. So I have the option to either generate a property stub or a field stub. So what should I do in order to make sure that they are accessing the domain?

[code]

using System;

using System.Colletions.Generic;

using System.Linq;

using System.Text;

namespace ConsoleApplication

{

class Program

{

public void Main()

{

PrincipalContext ctx = new PrincipalContext(ContextType.Domain, "444444444.4444.44444";

UserPrincipal user = new UserPrincipal (ctx);

PrincipalSearcher ps = new PrincipalSearcher (user);

[/code]

Changed type Frank Shen5 Wednesday, July 8, 2015 2:42 AM Redirected

Reply:

If I define PrincipalContext as a property stub , I get the error "object does not contain a definition for domain and no extension method domain accepting a first argument? What should I do?
How should I define PrincipalContext in order for it recognize Domain?

------------------------------------
Reply:

Hello,

for coding questions please ask in one from https://social.msdn.microsoft.com/Forums/en-US/home

Do you talk about Visio or Visual Studio?

Best regards

Meinolf Weber

MVP, MCP, MCTS

Microsoft MVP - Directory Services

My Blog: http://blogs.msmvps.com/MWeber

Disclaimer: This posting is provided AS IS with no warranties or guarantees and confers no rights.

Twitter:

------------------------------------

Mobile cannot login lync 2013 server

Dear Support,

I have run the Lync Server Remote Connectivity Test and Lync Autodiscover Web Service Remote Connectivity Test from https://testconnectivity.microsoft.com/ , and all passed.

but i still cannot login the lync2013 server via the mobile, the login process pending on the "Lync is signing in" for very long time.

Hopping someone could help me...

Edited by TECH-Tommy Friday, June 19, 2015 9:07 AM

Reply:

have you test different mobiles like IPhone, WM, Android?

Which reverse proxy did you use?

regards Holger Technical Specialist UC

------------------------------------
Reply:

And check the logs on the phone.

------------------------------------

Type 4 PostScript Drivers, Problem with multiple copies when Collate is enabled

Good afternoon all,

We are seeing a strange problem when using the inbox HP Type 4 PostScript drivers for certain printers. In particular, the HP LaserJet 400 M401 PS Class driver and the HP LJ300-400 color M351-M451 PS Class Drivers. Whenever a user specifies multiple copies of a document, and collate is enabled, they will get many more copies than they ask for. If you disable collate, it will print the proper number. If we change to the PCL6 version of the Type 4 driver, then it seems to print normally. One thing I noticed is that the PS class drivers are all older version 6.3.9600.16384 while the PCL6 drivers are newer 6.3.9600.17415. The Microsoft Enhanced Point and Print compatibility driver is also 6.3.9600.17415, so I am wondering if the cause is a driver version mismatch (since all of our clients are Windows 7 Professional machines)?

Can somebody from Microsoft reach out and tell me if this is expected behavior or if something is up? I would expect the PS and PCL6 inbox class drivers to at least be the same version. HP was no help.

Changed type Vivian_Wang Tuesday, June 30, 2015 8:15 AM

Reply:

Hi,

Thanks for your post.

I think we need to keep the Microsoft Enhanced Point and Print compatibility driver and PS class driver version matching.

Please make sure the configuration is correct, if the configuration is ok, only the driver version is different, it may be caused by the driver version mismatch.

https://technet.microsoft.com/en-us/library/jj134163.aspx

Regards.

Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact tnmff@microsoft.com

------------------------------------
Reply:

The 6.3.9600.16384 version is the driver that was built with the release on Server 2012R2. The 6.3.9600.17415 version would be one that included some patch from Microsoft.

I do see where there was a patch for the xps to printer PDL last year. Both these files are the 17415 version

--a-- W32x64 DRV ENU 0.3.9600.17415 shp 5,253,632 10-28-2014 msxpspcl6.dll
--a-- W32x64 DRV ENU 0.3.9600.17415 shp 5,243,392 10-28-2014 msxpsps.dll

The device functionality supported comes from HP. HP provides the driver to MS after HP has tested that the drivers work for the device. The vendor basically says, this works. There are file checks in place but MS is not testing the devices when HP said the driver works.

Since the PCL driver does work the way that you need it, is there a reason to go to the not working driver provided by HP?

Alan Morris formerly with Windows Printing Team

Edited by Alan MorrisEditor Monday, June 22, 2015 5:59 PM

------------------------------------
Reply:

Hi Alan, I was hoping this topic would catch your eye.

Collate appears to be broken with all the HP PostScript Class drivers. Unfortunately, I can't seem to get in touch with the right person/people at HP so I have little to no hope of it getting resolved.

There's no particular reason I need to go with the Post Script drivers per se, its just that from past experience I've tended to have better luck with Post Script drivers producing similar output across different devices.

I really prefer to use the Type 4 drivers; they seem lightweight and free of the usual vendor "add ons" such as supply status notification popups, etc, that tends to cause a lot of problems I've seen in the past.

Edited by wer83 Monday, June 22, 2015 6:44 PM

------------------------------------
Reply:

I've asked someone from HP to send me a comment on this post. Could you update the post regarding the vendor laden comment? I agree with you, I prefer an inf only driver installation.

Thanks

Alan Morris formerly with Windows Printing Team

------------------------------------
Reply:

:-) Good job.

Here's some additional information

I just tried this on my Win8.1 machine, it has the right version of the MSxpsPS.dll as 6.3.9600.17415. I could not repro the problem the TechNet webpage mentioned. I tried to print multiple pages multiple copies and collated job to an "HP Color LaserJet Flow MFP M880" high end printer and to "HP LaserJet 4100" older printer. Using this printer is not an issue as I can tell, since the PS v4 inbox class driver is basically the same one for all models. It sounds the customer needs to grab the latest MSxpsPS.dll.

I think you are using the .17415 version. I see the same in PrintManagement but the version I have is .17415.

Alan Morris formerly with Windows Printing Team

------------------------------------
Reply:

Hi Alan,
I should point out that all of my clients connecting to the print server are Windows 7 Professional boxes, so they are getting and using the "Microsoft Enhanced Point and Print compatibility driver."

I've tried using 3 different Post Script HP v4 class drivers (HP LaserJet 400 M401 PS Class, HP Color LaserJet 4600 PS Class, and HP LJ300-400 color M351-M451 PS driver) all with the same result. They all report being at version 6.3.9600.16384. If I switch to the PCL6 version of those drivers, the driver version increments up to 6.3.9600.17415 and all the Windows 7 clients print fine. Also, I don't know that this matters but the PS class driver always reports the "Speed: Unknown" and "Staples: Yes" even when it doesn't staple, but if I switch to the PCL6 Class driver, it reports the speed and staple correctly.

I think HP made some kind of improvement between .16384 and .17415 that the Post Script drivers didn't receive.

------------------------------------

Microsoft offers an explanation as to who really gets Windows 10 for free

Microsoft forced to explain who really gets Windows 10 for free

Carey Frisch

Tuesday, February 1, 2022

[Forum FAQ]How to do Sysprep in Windows 10 Insider Preview Build 10130

[Forum FAQ]How to do Sysprep in Windows 10 Insider Preview Build 10130

Upcoming changes to Windows 10 Insider Preview builds

How can we get Windows 10? : Upcoming changes to Windows 10 Insider Preview builds [UPDATED 6/22]

Who I can, insert sentence for to AWK

Power BI Page Size should be left for user to decide

techpowerup moderator human experiment

Exchange 2013 - EML files missing attachments when not running in cached exchange mode.

shared sever vs dedicated server

Get more time to execute sql query when field has 50 kb string

A solution for systems management

how to find wireless in windows

Good & helpful practices

The handle is invalid

Updating App-V apps deployed by SCCM

my computer has blue screen and restarted without my order

How do you interpret this.........

Manage Your Organization in ecp does nothing

Is it possible to copy a package?

SCCM 2012 Private Cloud

WSUS Server itself does not update, error: 80244019

Be our System Center Guru of the month! Let us bestow glory and kudos upon you!

Be our System Center Guru of the month! Let us bestow glory and kudos upon you!

Be our FIM Guru of the month! Let us bestow glory and kudos upon you!

Be our BizTalk Guru of the month! Let us bestow glory and kudos upon you!

Be our Azure Guru of the month! Let us bestow glory and kudos upon you!

SCCM Client in untrusted forest

phone 640 lte

Build 10130 doesn't boot unless Multicore CPU and Hyper-threading are disabled

-append searchmailbox log

KB fix for print document name in event logs on Server 2012 and Server 2012R2

Hyper-V Management Tools - POLL

Adding 2012 DC to a 2008R2 domain which still contains a 2003 DC

New Systems management Solution

User Access Logging Service

my microsoft phone

Problem on manually Updating DPM Agent to 2012 R2 RU6 on passive node of SQL 2012 and 2014 Failover Clusters (With CSV on 2014)

SQL Server Open File Dialog Freezes

Newbie Coding error in Visio/ Active Directory

Mobile cannot login lync 2013 server

Type 4 PostScript Drivers, Problem with multiple copies when Collate is enabled

Microsoft offers an explanation as to who really gets Windows 10 for free

Setup is Split Across Multiple CDs